feelspot WS2023 Hygrometers-Thermometers User Manual
- June 13, 2024
- FEELSPOT
Table of Contents
feelspot WS2023 Hygrometers-Thermometers
How to connect your device to Tuya?
- Download “Tuya Smart ” in the App store
Device Operation
- Long press the power button to switch the device on, after 10 seconds, the Wi-Fi function will auto matically turn on (Wi-Fi icon flashes on the screen). Then, you can open Tuya app to connect.
- If there is no connection with App in two minutes, Wi-Fi will automatically shut down.
- Please press the power button 3 times in succession to turn on the Wi-Fi again to connect. Press the power button 3 times in a row again, Wi-Fi will turn off.
- If you want to connect another phone or reset the connection, please reset the device by pressing the power button five times in a row and wait for 5-10 seconds until the Wi-Fiicon flashing to start the new connection process
- Invite your family member to co-join the device, share with multiple people to view a device.
- Remark: Wi-Fi route must be 2.4GHz
Phone Operation
How to set the alann value?
How to find device’s ID?
- If the user cannot find the device on APP, please check these:
- Please turn on the WIFI on the device to make the device enter the configuration network state (the WIFI icon flashes).
- Please enable the location service on your cell phone.
- Please enable the Tuya function in the Setting of your cell phone ..
- When finding the device to pair with the APP, the cell phone needs to connect to 2.4GHz WIFI.
- If the device can be configured normally, but the disconnection occurs, please note the following points:
- The device should not be too far away from the router. Avoid walls and physical obstructions between the device and the router.
- Check for WIFI channel interference. Too many routers or too many 2.4GHz devices in the same place may affect the channel quality. The router needs to be configured to change the channel.
Read User Manual Online (PDF format)
Loading......