AURORA EN-SL1 Single Spike Light Instruction Manual

June 3, 2024
Aurora

AURORA EN-SL1 Single Spike Light

AURORA-EN-SL1-Single-Spike-Light-product

IMPORTANT INSTALLATION INFORMATION

  • Installation should be carried out by a qualified electrician in accordance with the latest edition of the National wiring regulations.
  • Maximum voltage – 240V 50Hz AC.
  • Please take note of the IP (Ingress Protection) rating of your luminaire when deciding on a location.
  • All luminaries run HOT. It is the installer’s responsibility to consider fire & safety risks and take appropriate precautions.
  • Please take note of the maximum lamp wattage for this luminaire is 20W. (LED lamps are recommended)
  • Use a suitable IP-rated junction box to connect to the mains supply: Brown – (L) Live, Blue – (N) Neutral, Green/Yellow – Earth. (These fittings are class I and must be earthed.)
  • Ensure that ALL electrical connections are tight with no loose strands, including factory made.
  • Please take note of the nearest illuminated surface as detailed on the product label. AURORA-EN-SL1-Single-Spike-Light-fig- \(2\) AURORA-EN-SL1-Single-Spike-Light-fig- \(5\)

IMPORTANT USER INFORMATION

  • Always switch off the mains supply before installation, servicing, fitting, or changing the lamp.
  • Replace failed lamps immediately. Allow the lamp and fitting to cool before replacing the lamp. Check that the correct lamp type and wattage is fitted. Dispose of failed lamps correctly.
  • It is recommended to clean every two to three months to preserve the finish of this product. Do not use solvents or aggressive cleaning agents.
  • If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
  • Replace any cracked protective glass immediately and use only the original parts to do this.

Environmental Protection

(W.E.E.E.) – Aurora’s WEEE Reg.No. WEE/BG0130YX (UK Only)
Waste Electrical & Electronic Equipment Regulations (WEEE) require that any of our products showing this marking (left) must not be disposed of with other household or commercial waste. Aurora does not levy any WEEE disposal charges to its customers for affected WEEE-related products. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate any such product from other waste types and recycle it responsibly at your local facilities. Check with your Local Authority, Recycling Centre, or retailer for recycling advice. If, when you purchased any Aurora product, your supplier included a WEEE disposal fee, you should then contact your supplier for advice on his take-back of the product for the correct disposal.

GUARANTEE

This product is guaranteed for a period of 3 years from the date of purchase. The guarantee is invalid in the case of improper use, installation, tampering, and removal of the Q.C. date label, installation in an improper working environment, or installation not according to the current edition of the National Wiring Regulations. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Aurora does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Aurora reserves the right to alter specifications without prior notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Aurora User Manuals

Related Manuals