REVEAL X 3.0 Cellular Trail Camera Instruction Manual
- August 21, 2024
- Reveal
Table of Contents
REVEAL X 3.0 Cellular Trail Camera
GET TO KNOW YOUR CAMERA
CAMERA ANATOMY
- Lens
- IR LEDs
- Camera Working Status Indicator
- Device Status Indicator Light (Green/Blue)
- SD Card Indicator (Green)
- Power Switch (ON/SETUP/OFF)
- PIR Motion Sensor
- Wi-Fi Indicator Light (Blue)
- Microphone
- Battery Level Indicator
- 4G Signal Indicator
- SD Card Slot
- Test Button
- Battery Eject Button
- Reset Button
- External Battery In/DC Port
- USB Port
- Camera Stake/Mount Attachment
- Cable Lock Holes
- 1/4–20 Accessory
- Strap Holes
RECOMMENDED CAMERA ACCESSORIES (NOT INCLUDED)
-
SD Card
-
Solar Panel
-
Lockable Security Box
-
T-Post Mount
-
Lithium Cartridge
-
Adjustable Camera Stake
VIEW AND PURCHASE ALL ACCESSORIES AT TACTACAM.COM
QUICK START GUIDE
SETTING UP THE CAMERA
- Install a Class 10 U3 SD card (16GB or 32GB) (optional).
- Recommended brands are: SanDisk®, Lexar® and Tactacam™.
- Install 12 AA batteries or REVEAL Lithium Cartridge.
- To eject the battery tray, press the EJECT button on the REVEAL. When inserting AA batteries correctly orientate + and – on the front and back of the tray.
- See battery details on page 9 under Best Practices.
SIM CARD
- SIM is already installed on your camera.
- Your camera will scan for the best cellular network so you don’t have to worry about switching SIM cards or guessing which one works the best.
SETTING UP YOUR ACCOUNT
If this is your first REVEAL that you are activating, please visit the REVEAL Web Portal at: https://account.revealcellcam.com/ to set up your account. You can also access the Web Portal directly from your app, by clicking REVEAL WEB on the account page in the app.
If you already have a REVEAL account with ACTIVE cameras, you can simply log in to your app and add your camera following the instructions.
DOWNLOAD THE REVEAL APP
In your Apple or Google Play Store, download the Tactacam™ REVEAL app and sign in using the same email and password you created on the website https://account.revealcellcam.com.
CLICK HERE
TO DOWNLOAD THE APP OR VISIT YOUR APP STORE TO DOWNLOAD
ADD CAMERA TO THE APP
- Navigate to the REVEAL app on your device and login using your REVEAL account credentials. Click the home icon.
- Click the menu in the upper left corner.
- Select “+ Add a Camera”.
- Select the plan you wish to have and the model of the camera.
- Follow the prompts, allow access to the camera of your phone, and then scan the QR code on the camera.
- Name your camera, assign a location
PAIRING YOUR CAMERA TO YOUR PHONE THROUGH WI-FI
You can automatically change and apply the camera settings when your phone is connected to the camera’s Wi-Fi. This will not work unless you are next to the camera.
- Turn REVEAL to SETUP mode.
- When the Wi-Fi light is blinking blue, it is ready to pair to your phone or tablet.
- In the app go to the Account page and click Connect to REVEAL Wi-Fi.
- Follow the in-app instructions and turn. You can also manually connect in your phone’s Wi-Fi settings, select REVEAL and enter the password ( Reveal2021 ) This Wi-Fi password is case sensitive, no spaces.
- See preview on screen.
a. Red line on preview is point of focus.
b. To send test picture, press “Test” button on camera.
Also available in the app while connected to Wi-Fi:
a. Instantly apply setting changes from the app.
b. Formatting SD Card.
REMOTELY CHANGE THE CAMERA SETTINGS FROM THE APP
From the camera page click the box under the camera name. Then choose “Camera Settings”. Make sure to select “Apply Settings” when done to save your changes.
Note: In camera’s SETTINGS > Settings Check, Daily mode will check
settings every 24 hours. Hybrid mode the camera stays awake for 5 minutes
after every picture to receive SMS commands from the app.
Instant mode will receive settings instantly but will consume more battery.
SENDING A TEST PICTURE
- Put camera in set-up mode and allow the camera to connect to 4G signal. The LED signal indicator light will be constant green.
- After your camera is activated, you will see the signal status indicator searching, and then connect showing the signal strength.
- After the camera has connected, push the test button to send a photograph.
- You will see the status light blinking as the image is sending.
- If the status light turns red there may have been an issue trying to send the test photo. This is usually caused by signal strength or the SD Card.
- Light will be constant green.
- Refer to the app to be sure the picture has successfully sent.
- While your camera is connected to your phone with Wi-Fi, you will be able to access a live preview to help with camera setup and proper placement.
START USING YOUR CAMERA
LEAVING YOUR CAMERA IN THE FIELD
- While your camera is connected to your phone with Wi-Fi, you will be able to access a live preview to help with camera setup and proper placement.
- Wipe down the seal, removing any dirt and/or debris.
- Turn the camera to the ON position.
- As long as your phone picks up a signal, be sure a motion detected picture is sent to your phone via the app. This may take a few minutes.
SETTINGS / SPECIFICATIONS
Camera Mode | Photo + Burst + Video |
---|---|
Day/Night Mode | Daytime: Color, Nighttime: B+W |
IR Range | 96+ Feet |
PIR Angle | 45° |
Flash | Low-Glow IR Technology dramatically reduces visible flash. |
Operating Keys (2) | 1x Power button; Navigation arrows |
Lens | F=6mm; F/No=2.0; FOV=60° Auto IR-Cut-Remove (at night) |
SD Card (Optional) | Class 10, U3, 16GB-32GB, minimum 90MB/Sec |
Status Indicator | 1 LED |
Picture Format | JPEG |
Video | Optional |
Trigger Speed | 0.35 seconds |
SD Card Loop | Optional |
Operation Power | 6.2-12V |
Battery | X = 12xAA Cartridge Optional external power source (12V external |
battery pack or solar panel) – Barrel plug reducer size 4×1.7mm
External DC| 12V-2A
Transfer Picture via 4G| Thumbnail images sent to app (Additional data charges
may apply)
Request HD Photo and Video via 4G| Only in supported locations (Additional
data charges may apply)
Upload Frequency/Send Type| Instantly (Timely) Once, Twice, and Four times
daily
4G Communication| LTE wireless
4G Antenna| 1 Antenna
Device Serial No.| Yes
Interface| LTE, USB, and SD Card
Mounting| Strap; Tree Mount or Camera Stake (not included)
Operating Temperature|
- 25°C to 60°C
- 13°F to 140°F
Operation Humidity| 5% to 90%
Waterproof rating| IP66
Dimensions| 3.86”x3.1”x59”
Weight| About 1 lb
Certification| FCC RoHs
BEST PRACTICES
PROPER CAMERA PLACEMENT
- Location and placement is critical for optimal camera performance.
- Avoid hanging the camera on small trees that are prone to moving with the wind.
- Place the camera about waist high on the tree or post.
- We recommend having the camera pointing down about 7 to 15 degrees or the REVEAL Tree Mount.
- To achieve the best lighting conditions, face your camera North. Avoid facing your camera toward the sun.
- If the camera is placed too high on a tree and angled down, the field of view “window” becomes narrower, this is only a good idea if you plan to set your camera to watch a bait station or scrape.
- On a food plot:
- Camera height and angle is critical to get the widest field of view. Do not place camera too high.
- On a trail:
- For the best view, place your camera at an angle looking up or down the trail rather than perpendicular to the trail.
BATTERIES AND CELLULAR TRAIL CAMERA PERFORMANCE
- Use the recommended batteries for the REVEAL:
- Energizer® lithium batteries
- Duracell® Max alkaline batteries
- Rayovac® Ultra Pro alkaline batteries
- Do not mix old and new batteries
- Do not mix alkaline, lithium, standard, or rechargeable batteries
- Ensure the batteries are installed correctly with the regard to polarity (+ and -).
- always remove batteries if consumed or if product is to be left uns used for a long time.
- In cold weather, use lithium ion batteries for optimal camera speed and performance.
- If connecting the External Solar Panel (sold separately), the AA batteries would act as a backup power source. When paired with a REVEAL Lithium Cartridge, the Solar Panel V2 will charge your Lithium Cartridge.
TROUBLESHOOTING
CAMERA SENDS PICTURES OF NOTHING
Motion sensors (PIR sensors) are actually heat and motion sensors. This is why on a hot and windy day, people get false triggers. People and animals are not the only objects that will trigger your camera; vegetation and precipitation can act as a moving target as well.
- Be sure to clear any low hanging tree branches, brush, and weeds from the field of view, 5-10 yards in front of the camera.
- Motion sensitivity recommendations:
- To start set to High, and decrease sensitivity if you’re getting too many false triggers (9 being the highest and 1 being the lowest).
NIGHT VISION FLASH RANGE DOESN’T MEET EXPECTATION
- Check to make sure that batteries are fully charged.
- “Max Range” offers better IR flash range. Given IR flash range values are based on max range setting; adjust Night Mode to Max Range for better night vision flash range.
- High quality 1.2V NiMH rechargeable AA batteries can also offer improved IR flash range.
- Note: If your camera will be used in cold weather, we do recommend lithium batteries to deliver consistent results.
- Certain surroundings (like trees, walls, ground, etc.) within flash range can deliver you better night time images. To improve night images do not aim camera in an open field where there is nothing to reflect the IR flash back.
TO HELP PREVENT THEFT OR DAMAGE
Use a protective security box such as the one listed at www.tactacam.com.
SD CARD
- SD card is optional
- If SD card is present, camera will write to SD card first if SD card is working.
- SD loop applies to SD card if inserted. Otherwise, the looping will work on internal memory
CAMERA STOPS TAKING IMAGES OR WON’T TAKE IMAGES
-
Make sure that the SD card is not full. If the SD card is full, the camera will stop taking images.
Users can turn on SD Loop to avoid such problems. This will cause the SD card to overwrite older images. -
Make sure that alkaline or NiMH-AA batteries have enough power for the camera to work.
-
Format the SD card with the camera before using or when the camera stops taking images.
INTERNAL CONDENSATION ON LENS
The REVEAL is IP66 rated waterproof. This means the camera is water resistant
against powerful jets.
The only way the REVEAL can get condensation in or behind the lens is if the
antenna is not screwed in all the way, or if there is dirt or debris on the
seal. Follow these at home instructions to alleviate this issue if need be:
- Pull the SD card out and let the camera sit for 3–4 days open, in an area where there is circulating air (fan or vent).
- You can also put in a sealed container with rice for 24 hours to draw out the moisture.
- Clean the seal well and tighten your antenna.
- Place back out in the field.
IF THE CAMERA HAS ACCIDENTALLY BEEN SUBMERGED IN WATER
- Do not open the camera right away.
- Be sure to dry the outer housing of the camera, preventing water from entering the inside of the camera and causing internal damage.
LIMITED WARRANTY
HOW LONG DOES THIS COVERAGE LAST?
- One year from the date of purchase.
WHAT IS COVERED?
- This limited warranty covers: manufacturer defects in materials and workmanship including but not limited to:
- Defective buttons
- Cracked/chipped glass lens
- Broken SD card spring mechanism
- Broken USB port
- Covered cameras will either be repaired by a certified camera technician, or replaced.
WHAT IS NOT COVERED?
- This limited warranty does not cover any damage caused by the owner modifying, attempting to fix, or otherwise altering the product.
- This limited warranty excludes damage caused by people or animals, including but not limited to: antenna, strap, fresnel lens, glass lens, or camera housing.
- If damage is caused to the camera by the owner or animal, contact customer support for repair options to retain warranty coverage.
FCC REGULATIONS
FEDERAL COMMUNICATIONS COMMISSION – PART 15
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the Federal Communications Commission
rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may note cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CUSTOMER SUPPORT
DO NOT RETURN THIS PRODUCT TOYOUR RETAILER
For any warranty issues or questions on how to film your hunts with
Tactacam:
1668 Jordan West Rd, Decorah, IA 52101
www.tactacam.com
CALL 218-282-5650 I EMAIL
SUPPORT@TACTACAM.COM