Reveal KS Series Body Cameras User Guide

May 15, 2024
Reveal

Reveal KS Series Body Cameras

Reveal-KS-Series-Body-Cameras-product

Specifications

Dimensions H: 67.6mm W: 52.8mm D: 23mm
LCD display 2.0″ (480×360 pixels)
Weight Max 110g
Notifications Haptic feedback, Audio and LED
Bluetooth BLE 4.2
GNSS Galileo, GPS
Stabilization (EIS) Gyro sensor
Wi-Fi 802.11(A/8/G/N)
3G/4G (KS4 only) LTE FDD: 81/83/85/87/88/820 LTE TDD: 838/840/841 WCDMA:

81/85/88
Battery type| Lithium Polymer (1000mAh)
Battery life (recording)| Up to 2.5hrs
Battery charge time (from fiat)| 2.5 hours
Field of View (configurable)| 90-120 Degrees (Horizontal),

50-60 Degrees (Vertical)

Recording Resolutions| 480p / 720p / 1080p
Format Video| MPEG-4 (video codec H.264 or H.265)
Format Still Image| JPG
Encryption| AES 256 Encryption
Streaming Resolutions| 480p @500Kbps / 480p @1Mbps 720p @1.5Mbps / 720p @2.5Mbps
Storage capacity| 16GB EMMC

(Non-removable)

Temperature range| Storage: -20°C to 50°C (-4°F to 122°F) Operating: -20°C to 50°C (-4°F to 122°F) Charging: +10°C to 30°C (50°F to 86°F)

Basic Functions

Reveal-KS-Series-Body-Cameras-fig-1  

Button Functionality

Reveal-KS-Series-Body-Cameras-fig-2

Reveal-KS-Series-Body-Cameras-fig-3

Recording

Reveal-KS-Series-Body-Cameras-fig-4

SIM Card Insertion (KS4 only)

  1. Remove the two fixing screws from the SIM W, card cover using the tool provided.
  2. Insert the SIM card as per the illustration.
  3. Fix the SIM card cover back in place. Ensuring the screws are tightened to maintain waterproofing.

Mounting

The KS-Series camera has several mounting options including:

  1. Magnet Mount (pre-attached)
  2. Klick Fast Stud (supplied in the box)
  3. Crocodile clip (supplied in the box)
  4. Lanyard (supplied in the box)
    Guidance for camera mounting can be found on the Reveal Website: https://www.revealmedia.co.uk/support

Notifications

Reveal-KS-Series-Body-Cameras-fig-7

Product conformance

How to recycle your equipment

The symbol shown here and on the packaging means that the product is classed as electrical or electronic equipment, so DO NOT put it in your normal garbage bin.

It’s all part of the Waste Electrical and Electronic Equipment
(WEEE) directive to recycle products in the best way, and get rid of dangerous things more safely.
You should contact your retailer, supplier, or local city office for advice on how to dispose of this product in an environmentally friendly way.

Reduction of hazardous substances

This product is compliant with the EU Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Regulation
(Regulation No 1907/2006/EC) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive 2011/65/EU).

Radio Equipment Directive (RED}

The KS-Series product is compliant with the requirements of the Radio Equipment Directive(2014/53/EU).

FCC statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver .
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AL26-KS2 and FCC ID: 2AL26-KS4-US

This device contains license-exempt transmitter(s)/receiver(s) GD that comply with Innovation, Science and Economic Development
Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance O mm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
For Canada: The frequency stability of all transmission frequencies of U-Nll-1, U-Nll 2A, U-NII 2C and U-Nll-3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the U-Nll-1, U-NII 2A, U-Nll 2C and U-Nll-3

Battery Safety and Storage

Battery safety

Reveal’s body cameras use lithium Ion batteries which are common in most portable devices such as radios and mobile phones. Reveal’s cameras are safety tested with the appropriate certification.
Damage to a lithium Ion battery can cause excessive heat build-up often associated by an audible “hissing” sound, smoke and, in extreme cases, combustion. The KS-Series casing provides a significant degree of battery protection, however, if the case becomes punctured or crushed by excessive forces, then there is a risk of battery damage. Therefore, we recommend that the user of cameras performs a risk assessment as to the role of the wearer and likelihood of excessive trauma to the camera.
If a camera becomes excessively hot or emits any unusual sounds or smoke then:

  • Immediately detach the camera and place in a safe area.
  • Do not charge the camera.
  • Contact Reveal Support.

Storage

Store in dry place, away from direct sunlight and sources of heat, at a temperature between -20°C and 50°C (-4°F to 122°F).
Lithium-ion battery discharge naturally over extended periods of time and if not charged for prolonged periods of time, may deteriorate resulting in reduced performance and failure.
If your KS-Series camera is kept in long-term storage it should be charged to at least 50% of full charge every six months. Your warranty may be invalidated if you fail to recharge your battery regularly or to follow other instructions for the storage, installation, commissioning, use or maintenance of the camera.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals