Klipsch 714CIN1200 Powered Home Theatre Sound Bar Owner’s Manual
- June 3, 2024
- Klipsch
Table of Contents
Klipsch 714CIN1200 Powered Home Theatre Sound Bar
INSIDE
SOUND BAR CONTROLS
TV MOUNT MOUNTING
DIRECT WALL MOUNTING
SUBWOOFER PLACEMENT
Corner placement will increase the
amount of bass output, while placing the subwoofer along the middle of a wall,
or out in the room will decrease the amount of bass output.
SURROUND PLACEMENT
CONNECTING TO POWER
SUBWOOFER WIRELESS CONNECTION
SUBWOOFER RECONNECT 
CONNECTING WIRED
SUBWOOFER 
Connecting an additional wired sub to
your Cinema 1200 sound bar will NOT mute the included wireless sub if
connected. If you wish to replace the included wireless sub with a wired sub,
be sure to disconnect the included wireless sub from AC power.
LED ON/OFF
REMOTE
-
On/Off
-
LEDs DIM/Off
(Sound Bar) -
Bluetooth® Source Select
Long press to enter Bluetooth pairing mode -
Source Select
Selects Analog
(3.5mm) Input -
Source Select
Selects Optical Input -
Source Select
Selects HDMI ARC Input -
Source Select
Selects HDMI 1 Input -
Source Select
Selects HDMI 2 Input -
Subwoofer Level
Adjusts Subwoofer Volume
Enters subwoofer level adjust mode.
Use Vol + and Vol – to adjust.
Long press to reset sub level to default. -
Dialog Enhance Mode
Toggles through Dialog Enhance Mode 1, 2, 3 and OFF Long press: Resets dialogue mode to default -
Surround Level Adjust
Toggles through Night Modes 1, 2, and OFF.
Long press to reset to default. -
Night Mode On/Off
Toggles through Night Modes 1, 2, and OFF.
Long press to reset to default.
CONNECTIONS – HDMI-ARC
CONNECTIONS – DIGITAL OPTICAL
CONNECTIONS – EXTERNAL HDMI SOURCE
CONNECTIONS – EXTERNAL HDMI SOURCE THROUGH TV 
CONNECTIONS – ANALOG 
TURN OFF TV SPEAKERS
CONNECTIONS – EXTERNAL AUDIO VIA DIGITAL OPTICAL 
CONNECTIONS – EXTERNAL AUDIO VIA ANALOG 
CONNECTING TO NETWORK VIA ETHERNET 
CONNECTING TO NETWORK VIA WIFI (WPS)
KLIPSCH CONNECT APP
- Download the Klipsch Connect app
- Follow the instructions
CONNECTING TO AMAZON ALEXA
- Download the Klipsch Connect app
- Follow the instructions
CONNECTING TO GOOGLE CAST
- Download the Google Home app
- Follow the instructions
DECODING AND PLAYBACK MODES
| INCOMING DIGITAL AUDIO SIGNALS THE CINEMA 1200 WILL DECODE | PCM |
|---|
LPCM Up to 8 Channels
Dolby Audio-Dolby Digital (2.0, 5.1, Etc.)
Dolby Audio-Dolby Digital Plus (2.0, 5.1, 7.1, Etc.)
Dolby TrueHD
Dolby Atmos
The Cinema 1200 comes equipped with several user selectable playback modes. Depending on which playback mode the user has selected, the Cinema 1200 will decode the surround sound signal. The following chart shows which playback modes will result in which type of surround sound from the Cinema 1200, along with the recommended uses for each mode.
USER SELECTED INPUT MODE| OUTPUT FORMAT (WITH SURROUND 3
WIRELESS SURROUND SPEAKERS*)| RECOMMENDED FOR:
---|---|---
STANDARD| Atmos mixed to 5.1.4| Everyday listening for music, movies,
and TV shows
DIRECT| Output format same as source format, up to 5.1.4. Downmix any
format more than 5.1.4 down to 5.1.4.| “Artist intent” playback of movies and
TV shows, stereo (2-Channel) music playback.
MOVIE| Atmos mixed to 5.1.4| Immersive, optimized listening experience
for movies
MUSIC| Atmos mixed to 5.1.4| Immersive, optimized listening experience
for music
GAME| Atmos mixed to 5.1.4| Immersive optimized listening experience for
gaming
PARTY| Mix to All Channel Stereo Left = Left, Right = Right Center =
Left + Right
Left Surround = Left, Right Surround = Right
Left Front & Rear Height = Left, Right Front & Rear Height = Right
| Background/party music from all speakers
LED DISPLAY
| DISPLAY| BAR STATUS
---|---|---
INPUTS| BT| Bluetooth Input Selected
ANALOG| Analog Input Selected
DIGITAL| Digital (Optical) input Selected
TV| HDMI-eARC input Selected
HDMI 1| HDMI 1 input Selected
HDMI 2| HDMI 2 input Selected
GOOGLE| Google Chromecast input
ALEXA| Alexa input
USB| USB Thumb Drive Input
SOUND MODES| STANDARD| Standard Listening Mode ON
DIRECT| Direct Listening Mode ON
MOVIE| Movie Mode ON
MUSIC| Music Mode ON
GAME| Game Mode ON
PARTY| Party Mode ON
DIALOG MODE| DIALG 0| Dialog Mode Off
DIALG 1| Dialog 1 Mode ON
DIALG 2| Dialog 2 Mode ON
DIALG 3| Dialog 3 Mode ON
NIGHT MODE| NIGHT 0| Night Mode OFF
NIGHT 1| Night 1 Mode ON
NIGHT 2| Night 2 Mode ON
| DISPLAY| BAR STATUS
---|---|---
LEVEL ADJUST| VOL [XX]| System Volume Setting [1] – [99]
MUTE| System Muted / Volume Set To Minimum
MAX| System Volume Set To Max
SUB [XX]| Subwoofer volume [0] – [10]
LSR [XX]| Left surround volume [0] – [10]
RSR [XX]| Right surround volume [0] – [10]
FHT [XX]| Front height volume [0] – [10]
BHT [XX]| Rear height volume [0] – [10]
CEC TOGGLE| CEC [XXX]| CEC Protocol Turned [On] or [Off]
**DECODING| **
DOLBY AUDIO
| Dolby Audio (supporting Dolby Digital, Dolby Digital Plus, Dolby TrueHD)
DOLBY ATMOS| Dolby Atmos Input
MULTI-CHANNEL PCM| PCM or LPCM Input
OTHER| SURR. PAIRING| Surrounds pairing
CONNECTED| Surrounds paired
SUB PAIRING| Subwoofer pairing
CONNECTED| Subwoofer paired
BT PAIRING| Pairing Bluetooth
CONNECTED| Bluetooth Paired
LED HI| LED high brightness
LED LOW| LED low brightness
LED OFF| LED Off (Will display on low for 2 seconds then turn off)
ADJUSTING SUBWOOFER LEVEL
SURROUND LEVEL – QUICK ADJUST
SURROUND LEVEL ADJUSTMENT 
NIGHT MODE 
DIALOGUE MODE 
SPECIAL OPERATING MODES
In addition to the “out-of-box” consumer operating mode (default), the Cinema Series Sound Bars feature special operating modes to optimize the use of the bar for different installation situations. These operating modes and their use cases are outlined below.
DISPLAY MODE
- To be used when the bar is installed in an active retail display where volume is controlled by an external source.
- Source selection is fixed to the Optical input.
- The default volume is fixed to 6dB below the maximum volume setting.
- The subwoofer level is fixed at the default setting.
- Bluetooth and Wi-Fi (or other wireless audio sources) are disabled.
- Product key controls are disabled. Volume controls are also disabled.
RETAIL MODE
- To be used when the bar is installed in a retail situation where volume should controlled directly on the bar.
- Source selection is fixed to the Optical input.
- The default volume is set to ensure a 70dB max SPL, C-weighted, at 36” from the system. The subwoofer level is fixed at the default setting.
- Bluetooth and Wi-Fi (or other wireless audio sources) are disabled.
- Product key controls are disabled, except for “Volume Up” and “Volume Down”.
- IR Remote commands are ignored, except for “Volume Up”, “Volume Down”, “Sub Up”, and “Sub Down”.
- If there is no user interaction via control buttons or IR remote for 90 seconds, the volume and subwoofer level will return to the default levels listed above.
INSTALLER MODE
- The Installer Mode is a special operating mode that allows special functionality for when the Cinema 800 / 1200 is installed by a custom integrator. In Installer Mode:
- Auto-Standby is disabled for all sources except TV (HDMI-ARC). The Cinema 800 / 1200 will still respond to the CEC “Off” command from a TV.
- Auto-On is disabled for all sources except TV source (HDMI-ARC). The Cinema 800 / 1200 will still respond to the CEC “On” command from a TV.
- Turning on and off via CEC commands may be controlled by the user in the TV menu options. This allows the user to decide whether or not to apply CEC commands to the system when the TV source is being used.
- All other functionality is the same as standard DEFAULT MODE.
STREAMER MODE
- The Streamer Mode is a special operating mode that allows the bar to seamlessly accept and interact with the analog output of an audio streaming device or streaming player.
- Whenever there is a signal detected on the Analog input, the Cinema 800 / 1200 will switch to the Analog input.
- The default volume will be set to a fixed level on the sound bar, allowing the user to adjust the volume via the streaming device.
- When the Analog source is selected, the Cinema 800 / 1200 will not respond to “Volume Up” or “Volume Down” commands on the sound bar or remote. The system will still respond normally to volume commands for all other other sources.
- All other functionality is the same as standard DEFAULT MODE.
OPERATING MODES SELECT MENU
The operating modes can be accessed and selected in the “Operating Modes Select” menu. To access this menu:
CINEMA 800 / 1200
While holding [SOURCE] + [VOLUME +] buttons on the sound bar, press [MUTE]
button on the IR remote (while IR remote is aimed at sound bar IR sensor) to
enter ‘Operating Mode Select’ menu.
To SCROLL through operating mode options: Press the [VOLUME +] button on the remote control.
Default → Display → Retail → Installer → Streaming Player
The LED display will flash the name of the currently selected operating mode.
To CONFIRM selected operating mode:
Press the [MUTE] button on the remote control, or
OR
Wait 10 seconds without pressing any buttons on the remote or sound bar. The
bar will automatically confirm the currently selected operating mode.
To EXIT Operating Modes Select menu:
Press [POWER] button on the sound bar
The system shall EXIT the ‘Operating Select Mode’ and return to the prior
status.
FACTORY RESET
Clears Bluetooth ® pairing history and user programmed IR commands
Hold 10 Seconds
Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how
Bluetoot
“The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Klipsch Group, Inc. is under
license. Other trademarks and trade names are those of their respective
owners.”
Dolby, Dolby Audio, Dolby Vision, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992–2020 Dolby Laboratories. All rights reserved.
HDMI, High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing, Administrator in the United Staed and/or other countries.
IMPORTANT SAFETY INSTRUCTIONS!
-
READ these instructions.
-
KEEP these instructions.
-
HEED all warnings.
-
FOLLOW all instructions.
-
DO NOT use this apparatus near water.
-
CLEAN ONLY with dry cloth.
-
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
ONLY USE attachments/accessories specified by the manufacturer.
-
USE ONLY with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over. -
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
-
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
-
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
-
The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
-
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
-
The equipment shall be used at maximum 113˚F / 45˚C ambient temperature.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
WARNING: To reduce the risk of fire or electrical shock, do not expose
this apparatus to rain
or moisture.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instruction.
WARNING: No naked flame sources – such as candles – should be placed on the product.
WARNING: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
THIS PRODUCT CONTAINS A LITHIUM COIN CELL BATTERY. IF MISUSED OR ABUSED THIS CAN RESULT IN:
- Smoke or gas hazard
- Heat hazard
- Fire hazard
- Explosion hazard
WARNING: Do not place batteries in mouth or ingest. Chemical burn hazard. Keep new and used batteries out of reach of children and pets. If swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
WARNING: If battery compartment does not close securely, stop using the product and keep it away from children and pets.
WARNING: Do not handle leaking or damaged Lithium batteries.
WARNING: Risk of leakage. Only use the specified type of batteries. Never mix new and used batteries. Observe correct polarity. Remove batteries from products that are not in use for extended periods of time. Store batteries in a dry place.
WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Do not recharge non-rechargeable batteries.
WARNING: Avoid exposure to extreme heat or cold.
Please dispose of any used batteries properly, following any local
regulations. Do not incinerate.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside. Refer all
servicing to qualified service personnel.
Place the equipment near a main power supply outlet and make sure that you can
easily access the power breaker switch.
WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back panel or included power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer.
EU COMPLIANCE INFORMATION
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive
2014/35/EU; European Union EMC Directive 2014/30/EU; European Union
Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU;
European Union WEEE Directive 2012/19/EU; European Union Eco-Design Directive
2009/125/EC; European Union Registration, Evaluation, Authorization and
Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio
Equipment Directive (RED) 2014/53/EU.
This product contains batteries that are covered under the 2006/66/EC European Directive, which cannot be disposed of with normal household waste. Please follow local regulations.
You may obtain a free copy of the Declaration of Conformity by contacting your dealer, distributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact information can be found here: http://www.klipsch.com/Contact-Us
WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU)
and Norway.
This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
FCC AND CANADA EMC COMPLIANCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class B Digital Device.
Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device.
Caution: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is to comply with Class B limits. All peripherals must be shielded and grounded. Operation with non- certified peripherals or non-shielded cables my result in interference to radio or reception.
WIRELESS TRANSMITTER COMPLIANCE INFORMATION
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Slave Equipment: (for play-fi module 2.4G and 5GHz dual bands)
This device is slave equipment, the device is not radar detection and not ad-
hoc operation in the DFS band.
Industry Canada statement:
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- Thisdevice may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Caution:(for play-fi module 2.4G and 5GHz dual bands)
- The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
- The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
- The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
- The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
- Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
-
RSB-3
FIRMWARE VERSION 1.4
Bluetooth Operating Frequency: 2402-2480MHz
Maximum RF Power: 10 dBm (e.i.r.p) -
RSB-6
Bluetooth Operating Frequency: 2402-2480MHz
Maximum RF Power: 4 dBm (e.i.r.p) -
RSB-8
Bluetooth Operating Frequency: 2402-2480MHz
Maximum RF Power: 4 dBm (e.i.r.p) -
RSB-11
Bluetooth Operating Frequency: 2402-2480MHz
Maximum RF Power: 10 dBm (e.i.r.p)
Wireless Tx & Rx Operating Frequency: 2405.35-2477.35MHz
Maximum RF Power: 10 dBm (e.i.r.p) -
RSB-14
Bluetooth Operating Frequency: 2402-2480MHz
Maximum RF Power: 10 dBm (e.i.r.p)
Wireless Tx & Rx Operating Frequency: 2405.35-2477.35MHz
Maximum RF Power: 10 dBm (e.i.r.p)
Wi-Fi Operating Frequency: 2412-2472 MHz
Maximum RF Power: 20 dBm (e.i.r.p)
Wi-Fi Operating Frequency: 5150-5350MHz & 5470-5725MHz
Maximum RF Power: 20 dBm (e.i.r.p)
SOUND BAR WARRANTY
WARRANTY – U.S.
Klipsch Group, Inc, (KGI) warrants to the original retail purchaser that this
product is to be free from defective materials and workmanship for a period of
one (1) year on electronics and three (3) years on woofer, cabinet and non-
electrical mechanics, from the date of purchase, if it is properly used and
maintained. If this product proves defective in either material or
workmanship, KGI, at its option, will (a) repair the product, or (b) replace
the product, at no charge for parts or labor. If the product model is no
longer available and cannot be repaired effectively or replaced with an
identical model, KGI at its sole option may replace the unit with a current
model of equal or greater value. In some cases, modification to the mounting
surface may be required where a new model is substituted. KGI assumes no
responsibility or liability for such modification. To obtain a repair or
replacement under the terms of this warranty, please return to dealer first,
if possible, and the dealer will direct you accordingly for repairs or
replacement. You will be required to submit a copy of the original receipt.
Return shipping for exchanges/repairs is the sole responsibility of the
original retail purchaser.
Limitations:
- This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with KGI’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an authorized dealer.
- This limited warranty terminates if you sell or otherwise transfer this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
KLIPSCH.COM
©2020, Klipsch Group, Inc. Klipsch Group, Inc. is a wholly-owned subsidiary of
Voxx International Corporation.
Klipsch and Keepers of the Sound are trademarks of Klipsch Group, Inc.,
registered in the United States and other countries.
The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG,
Inc. and any use of such mark by Klipsch Group, Inc. is under license. For DTS
patents, see http://patents.dts.com. Manufactured under license from DTS,
Inc. DTS, the Symbol, DTS and the Symbol together, Virtual:X, and the DTS
Virtual:X logo are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. © DTS, Inc. All Rights Reserved.
210-150002
210-149990
020-190059
V03 – 210406
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>