BLUEWEAR 018324-018329 HI-VIS Shell Jacket User Guide
- June 3, 2024
- BLUEWEAR
Table of Contents
018324-018329 HI-VIS SHELL JACKET
EU DECLARATION OF CONFORMITY Item number
018324-018329
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
018324-018329 HI-VIS Shell Jacket
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
HI VIS SHELL JACKET
Size S – 3XL CL3
Conforms to the following directives, regulations and standards:
Directive/Requlation | Harmonised standard |
---|---|
PPE (EU) 2016/425 | EN ISO 20471:2013+A1:2016: CL 3 EN 343:2019 |
The PPE is identical to the PPE which is subject of EU type examination
certificate No:| 0598/PPE/22/4045
---|---
Name and address of the notified body involved:| SGS FIMKO OY
Takomotie 8 00380 HELSINKI, Finland NB: 0598
This product was CE marked in year:
Skara 2022-11-03
The selection and use of Hi-Vis garments should be based on a risk assessment
of the prevailing conditions. When used, the garment must be of the correct
size and must fit tightly in the right way, and it must be clean, undamaged
and free from defects that can affect the characteristic properties of the
garment. The garment must NOT be covered by any other garment or product. The
effectiveness of the protective garment is impaired if it is dirty. The use of
Hi-Vis garments does not guarantee that the wearer
will be visible under all circumstances. This garment does not provide
protection against chemicals, extreme temperatures, fire, cold, electricity or
in other hazardous situations. A combination of protective clothing can
deliver a higher safety class. This higher safety class, where applicable, is
specified in the garment’s CE marking. If a maximum number of washes is
specified in the washing instructions, this only refers to the fluorescent and
reflective properties. The garment’s service life is affected not only by the
specified maximum number of wash cycles, but also by factors such as usage,
care, storage, etc. If a maximum number of washes is NOT specified in the
washing instructions, the material has been tested after 5 washes. The
protective clothing must be stored in a dry, well-ventilated area. The garment
must only be repaired with fabric and thread that comply with the requirements
for the garment standard.
Do not repair the garment yourself. The Hi-Vis garment must be discarded if
faded, worn or deformed. Follow local regulations for disposal. See label in
garment for care instructions. Classification according to EN ISO
20471:2013+A1:2016, EN 343:2019.
- The standard maximum number of cleaning cycles is not the only factor related to the lifetime of the garment. The lifetime will also depend on usage, care storage, ect.
- The assembly of the garment was tested to clause 5.6.3 for water vapour resistance and thermal resistance achieving a water vapour resistance (Ret) measurement of 70.2 m2.Pa.W-1 and a water vapour permeability index (imt) value of 0.0062.
- Clause 5.6.3 requires an Ret value of less than or equal to 5 m2.Pa.W-1 for multilayer garments, otherwise the imt of the garment must be at least 0.15. The end user must decide on the basis of the risk assessment whether the comfort index is sufficient, and whether the water vapour resistance of the garment is low enough, for the end use.
Class | 3 | 2 | 1 |
---|---|---|---|
Background material | 0.80 m2 | 0.50 m2 | 0.14 m2 |
Reflective material | 0.20 m2 | 0.13 m2 | 0.10 m2 |
Combined | N/A | N/A | 0.20 m2 |
Suggested visibility as passive road-
-user in daylight and darkness| > 60 km/h| 5 60 km/h| 5 30 km/h
3 = Indicates class
NOTE! The classification is determined according to the smallest area of
visible material, given in m² in the table.
Water penetration resistance | 3 | 2 | 1 |
---|---|---|---|
Test on fabric | ≥ 13 000 Pa* | ≥ 8 000 Pa* | ≥ 8 000 Pa** |
Test on seam, before pretreatment | ≥ 13 000 Pa | ≥ 8 000 Pa | ≥ 8 000 Pa |
3 = Waterproof class (max 3)
1 = Moisture vapour class (max 3)
1 m hydrostatic head = 10,000 Pa
- After pretreatment, Before pretreatment
Recommended usage based on moisture vapour resistance of garment.**
Working temperature (°C) | 3 | 2 | 1 |
---|---|---|---|
25 | 205 min | 105 min | 60 min |
20 | – | 250 min | 75 min |
15 | – | – | 100 min |
10 | – | – | 240 min |
5 | – | – |
Operating instructions (Translation of the original instructions).
Contact customer service if there is a problem
,www.jula.com
Max 25 wash cycles.
Notified body
Aangemelde instantie No. 0598:
SGS FIMKO OY, Takomotie 8, 00380 HELSINKI, Finland.
This garment bears CE marking to demonstrate compliance with EU Regulation
2016/425 Personal Protective Equipment and meet the standards EN ISO
0471:2013+A1:2016, EN 343:2019.
2022-11-04
© Jula AB, Box 363, SE-532 24 SKARA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>