BLUEWEAR 016514 Work Gloves Instructions
- June 4, 2024
- BLUEWEAR
Table of Contents
BLUEWEAR 016514 Work Gloves
WARNING
Gloves shall not be worn when there is a risk of entanglement by moving parts
of machine.The durability of the gloves depends on how they are used. Always
check that the gloves are in good condition before using them. Keep the gloves
in a clean, dry and ventilated place, free from moisture, dirt, mould and
sunlight. Do not leave the gloves in contaminated condition if they are going
to be reused. Remove as much as possible of any contamination from the gloves
after using them. Dispose of in accordance with current legislation. The
materials used are not known to cause allergies. If any reaction occurs
discontinue use.
EU DECLARATION OF CONFORMITY
- Item number
This declaration of conformity is issued under the sole responsibility of the manufacturer
ASSEMBLY GLOVE LEATHER
Conforms to the following directives, regulations and standards
Name and address of the notified body involved
SATRA Technology Europe Ltd Bracetown Business Park, Clonee, Dublin 15,
Ireland Notifed Body No: 2777|
This product was CE marked in year
Item no. 016514 Jula AB
CONTACTS
- www.jula.com
- Box 363, SE-532 24 Skara
- SE Tel. 0511-34 20 00
- NO Tel. 67 90 01 33
- PL Tel. 22 338 88 88
- Made in Pakistan.
Notified body
These gloves bears CE marking to demonstrate compliance with Regulation (EU) 2016/425 Personal Protective Equipment and meet the standards EN ISO 21420:2020, EN 388:2016+A1:2018.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>