Nero 450 Steam/Dry Iron Non-Stick Auto-Off Instruction Manual
- June 6, 2024
- Nero
Table of Contents
NON-STICK, AUTO-OFF, STEAM/DRY IRON
MODEL 450
Please read these instructions before using and view the illustration components before using the appliance.
Storage:
After using, pull out the plug, pour out the remaining water, turn the steam
control to a minimum, turn the temperature control to minimum, let the iron
cools down and place the iron in a safe and dry place vertically.
Attention:
- Please read the owner’s manual before using the product.
- Use distilled or boiled water only. Do not fill in with any other liquid except water.
- The iron must not be left unattended while it is connected to the supply mains.
- The plug must be removed from the socket outlet before the water reservoir is filled with water.
- When placing the iron on its heel, ensure that the surface on which the iron is placed is stable.
- The iron must be used and rested on a stable surface.
- The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
Cautions:
- Make sure that the applied voltage is the same as the rating voltage, and the socket has an effective earth connection.
- If the supply cord is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard.
- This iron is for households only.
- Do not immerse the iron into any liquid for cleaning.
- Do not touch any hot metal parts, hot water, or steam to avoid scalding.
Main technical parameters:
Type | Rated voltage | Rated frequency | Rated power |
---|---|---|---|
AJ-2048-22 | 220-240V | 50/60Hz | 2000-2400W |
Components:
This product has many features such as a temperature-regulating dial, spraying, dry ironing, variable steam, and steam burst. It also features an easy-to-grip shape, with high heat efficiency, resulting in quick ironing of clothes.
A: Non-stick soleplate
B: Spray nozzle
C: Handle
D: Fill cover
E: Steam on/off switch
F: Spray & burst steam button
G: Heating indicator light
H: Cord guard| R: Top handle
I: Rear cover
J: Pilot light temperature dial
K: Clean button
L: Water tank
M: Skirt adornment
N: Skirting base
---|---
Filling water:
- Before filling water, please pull out the plug first.
- Set the steam control to the minimum position.
- Pull open the cover of the water-filling mouth, then fill the water.
Spraying:
Press the spraying button, steam will spray out from the spraying nozzle.
Enough water should be kept in the water tank for steaming.
Steam ironing:
- To use steam ironing, turn the steam on/off switch to the minimum position and set the temperature control on the dial to the max position.
- After the heating indicator light goes out, turn the steam on/off switch to the maximum position, steam can be sprayed, and ironing can start.
Bursting steam:
Set the temperature control dial to the maximum position, then press down the
bursting steam button, the base plate will spray out bursting steam.
Dry ironing:
Turn the steam on/off switch to the minimum position, set the temperature
control to the suitable position, you can start dry ironing.
Self-cleaning:
First, fill the tank with water, then turn the iron on and set the temperature
control to the maximum position, after about 3 minutes press the self-clean
button for about 1 minute, strong steam and hot water will be sprayed to
clean the steam chamber. Use this function once every two weeks if the iron
has been used regularly.
Automatic shut off:
If the iron is switched on and not moved for a period of 8 minutes while
standing on its heel or 30 seconds while resting on the soleplate, an internal
safety feature will switch the iron off and the auto-shutoff indicator will
blink. Move the iron to turn on heating again.
Backed by Nero’s 12-month replacement guarantee
Imported By Weatherdon www.weatherdon.com.au
Made in China