BLUEWEAR 016785 Assembly Gloves Premium Instruction Manual
- June 4, 2024
- BLUEWEAR
Table of Contents
**BLUEWEAR 016785 Assembly Gloves Premium Instruction Manual
**
Assembly Instruction
WARNING! Gloves shall not be worn when there is a risk of entanglement by moving parts of machine. The durability of the gloves depends on how they are used. Always check that the gloves are in good condition before using them. Keep the gloves in a clean, dry and ventilated place, free from moisture, dirt, mould and sunlight. Do not leave the gloves in contaminated condition if they are going to be reused. Remove as much as possible of any contamination from the gloves after using them. Dispose of in accordance with current legislation. The materials used are not known to cause allergies. If any reaction occurs discontinue use.
Declaration of Conformity
Item Number
016782
Jula AB, Box 363, SE-532 24 KARA, SWEDEN
This Declaration of conformity is issued under the sole responsibility of the manufacture.
WORK GLOVES
Size 8, 9, 10, 11
Conforms to the following directions and standards.
Directive/Regulation | Harmonized standards |
---|---|
PPE (EU) 2016/425 | ISO 2420:2020, 388:2016 Cat ll |
3121 X
The PPE is identical to the PPE which is subject of EU type Examination
certificate NO:
Name and address of the notified body involved:
SATRA Technology Europe Ltd,
Bracetown Business Park Clonee, D15 YN 2P, Ireland NB 2777
This product was CE marked in year :
Skara 2021-10-15
Maria Sihvonen Grahn
BUSINESS AREA MANAGER
OBSOLESCENCE
When stored properly, will not suffer changes in the mechanical properties from the date of manufacture. Service life cannot be specified and depends on application and responsibility of user to ascertain suitability of the glove for its intended use.
EN 388:2016 Cat ll
X Product Not assessed for this property.
Support
Item no. 016785
Jula AB
www.jula.com
Box 363, SE-532 24 Skara
Made in Pakistan.
Notified body/Jednostka notyfikowana No. 2777:
SATRA Technology Europe Ltd,
Bracetown Business Park, Clonee, D15 YN2P, Irland.
These gloves bears CE marking to demonstrate compliance with Regulation (EU) 2016/425 Personal Protective Equipment and meet the standards EN ISO 21420:2020, EN 388:2016.