ELAC UCR52 Center Channel Speakers Instruction Manual
- June 3, 2024
- ELAC
Table of Contents
ELAC UCR52 Center Channel Speakers
Safety Instructions
General information
- Please read and follow these safety instructions.
- Keep them safe for future reference.
- Observe all warnings on the speaker and in the manual. Please check the speaker for damage before use. The speaker must be in perfect working condition. Damaged parts may lead to personal injury.
Use only as directed
- Connect the speaker(s) according to the instructions in the manual.
- Many ELAC speakers are equipped with spikes and/or anti-slip feet. They are explicitly provided for leveling the speaker. For leveling on an uneven floor, unscrew the spikes or anti-slip feet by 2-3 turns of thread. The speaker should always be in perfect vertical alignment: the stability of the speaker must not be compromised by using spikes or anti-slip feet as the speaker may tip over.
Location
- Install the speakers on a level surface only
- When choosing the location of these speakers do not place them in locations that are:
- In direct sunlight
- Very humid
- Prone to vibrations
- Exceptionally hot or cold
- Near CRT Televisions (the speakers are not magnetically shielded and may cause color issues with a CRT based TV)
- Close to magnetic cards (Since the speakers are not magnetically shielded placing magnetic cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid injury from tip-over. Please note, that stability can be increased by using spikes on carpeted surfaces. However, the mounting of spikes must be carried out carefully due to their very sharp ends which may cause injuries. The stability on slippery floors can be increased by using Velcro fastening tape or double- sided adhesive tape. Do not install the speaker near any heat sources such as radiators, heating valves, stoves, or other apparatus (including amplifiers) that produce heat, or in areas where there is a risk of explosion.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install the speaker in a closed rack or in a closed cupboard.
- Do not put burning candles on or near the speaker.
- Do not install the speaker near transformers because electromagnetic stray fields can cause hum noise on woofers.
- In combination with certain materials/lacquers/material surfaces, anti-slip feet or spike washers may cause colored imprints on the surfaces.
Overload
Extreme overload of the device due to very high volume may cause damage to
individual components. Because of the possible danger, you should never leave
loudspeakers under extreme overload conditions unattended.
Service
DANGER! Do not open the cabinet because the components and conductors may
carry current! Servicing to be carried out by qualified service personnel
only. Servicing is required when the loudspeaker has been damaged in any way,
such as damage to the power supply cord or the plug, or when liquid has been
spilled or objects have fallen onto the loudspeaker, the speaker has been
exposed to rain or moisture, does not operate normally, or has been dropped.
To reduce the risk of electric shock, do not open the loudspeaker. Servicing
should be carried out by qualified service personnel only.
Cleaning
NOTE: Clean only with soft, smooth cloth or with a dust brush. Do not use
scouring agents, alcohol, benzene, furniture polish or other agents for
cleaning! Modern furniture is often coated with multiple varnishes and
plastics which can be treated with chemical agents. Some of these agents
contain substances that degrade or soften the rubber feet. Therefore we advise
that you place an anti-slip mat underneath the loudspeaker(s).
Volume
CAUTION! Continuous high volume may cause severe damage to your hearing.
Please listen responsibly.
Disposal
The packaging is made from recyclable materials. Dispose of this in an
environmentally friendly manner. At end of life do not dispose of the
speaker(s) with standard household waste. The speaker must be recycled in
accordance with local legislation. Ask your local government for further
information on recycling as the device contains valuable raw materials.
Disable the speaker(s) before disposal.
Philosophy
Thank you for purchasing this ELAC product.
Since the time we started (1926), ELAC has always striven to achieve the very
best. Your new ELAC speakers are built to the highest standards using high-
quality components that are carefully constructed to deliver the best-in-class
sound quality. They are developed by a passionate group of individuals whose
soul purpose is to bring a new dimension of sound quality into your home.
Enjoy
Before Use
Avoid damage to the speakers and other components:
- Carefully unbox the speakers carefully to avoid physically damaging your speakers.
- Use appropriate gauge wires (minimum of 14 gauge wire for runs up to 25 feet).
- Make sure wire polarity is connected correctly. Most speaker cables are coded for ease of use. Make sure positive (red) connection on the amplifier terminal is connected to the positive (red) on your speakers. Follow the same instructions for the negative side. Strip off approximately 1/2”of the insulation from the ends of the speaker cable, twist the bare strands and insert into the binding post.
- Ensure your equipment is turned off before connecting speakers.
- Check to ensure positive and negative wires are not touching each other once they’re connected to the speaker terminals.
Most of the customers are connecting the speakers using a standard connection, but some customers prefer a bi-wire or bi-amp connection of the speakers. A standard speaker connection is shown in Fig.1. For a standard connection, you need to keep the shorting bars in place. A bi-wire or bi-amp speaker connection is shown in Fig.2. For a bi-wire or bi-amp connection, you need to remove both shorting bars.
Outrigger Feet & Spike Installation (UFR52 Only)
Using the included feet provide a wider support base for the speaker cabinet.
The included spikes improve stability on uneven surfaces and thickly carpeted
floors. Please, use caution when dealing with spikes as they are sharp.
IMPORTANT! In order to prevent scratching or damage the cabinet, turn the
speaker upside down onto a soft surface while you attach the outrigger feet
and spikes. We highly recommend a second person help with this process
- Attach the feet with provided machine screws (see Fig.A).
- Screw in the spikes as shown in Fig.B. The speaker can now be turn back over. Please, be careful when handling the speaker with the spikes installed. If you have hard wood tile floors, please use the provided floor discs (Fig.B).
- Using the supplied allen wrench adjust the height of the spikes until the speaker sits level and all four spikes are touching the floor (Fig.C).
- Once the speaker is level, use the supplied covers to lock the spikes into place (Fig.D).
Installing and Removing the Magnetically Attached Grills
The mesh grills of your Uni-Fi Reference speakers are designed to be removable
if desired. To remove it, hold the top or bottom edges of the grill and pull
gently. To replace the grill, align the edges of the grills with the edges of
the cabinet. The grill will be positioned and hold in place by the magnets
incorporated in the grill.
IMPORTANT!
ELAC UFR52 Floorstanding Speakers Safety Clip The ELAC UFR52 Floorstanding
speakers include a safety clip in the accessories bag. Install this safety
clip on back of the cabinet for securing the cabinet to a wall to prevent tip-
over. Use support hooks (not included) screwed into a wall and pass
appropriate size cord (not included) around the hook and through the safety
clip. Test to ensure mounted hooks and cord will prevent tipping of the
speaker.
CAUTION:
The safety clip is not a mounting fixture and the speaker should not be hung
on the wall using the clip. ELAC does not claim responsibility for damage
resulting from improper assembly, installation, insufficient strength of the
installation materials, misuse, or natural disasters.
Speaker Placement
Achieve maximum performance and optimal sound quality from your ELAC Uni-Fi
Reference speakers with proper speaker placement and set-up. While not all
rooms are the same, use the following guidelines to configure the speakers for
your particular room. There are no “exact” rules or boundaries in setting up
your speakers but the following suggestions will help optimize your desired
results. Remember the best sound setup is what sounds best for you so don’t be
afraid to experiment and make adjustments to the placement and directivity of
the speakers.
Place the speakers approximately one to two feet away (Fig. 3) from boundaries such as wall(s) and especially corners. Close proximity to a side or rear wall will enhance bass performance (output), but being too close (particularly to a corner) may result in bass that is unnatural. If a corner location is unavoidable, try to position the loudspeaker so that the distance to the rear wall is not equal to the distance to the side wall.
Stereo Setup
- For the best results and the most realistic stereo image and lifelike sound, place the speakers so that an equilateral triangle (Fig. 4) is created between the speakers and your favorite listening position. This set up creates the optimum imaging performance.
- If you find that your UBR62 or UFR52 left and right speakers are too far apart, angle (toe in) them towards the listening position to gain a more focused central image.
Surround Sound Setup
Whether you use the UBR62 bookshelf or the UFR52 floorstanding speakers for a 5.1-channel surround set-up, avoid placing the surround speakers forward of your listening position. The surround speakers should be spread apart wider than the front speakers. In addition, elevate the speakers to the same height or slightly higher as the front speakers for the most enveloping sound field. Like the front speakers, you may need to experiment with positioning by pointing the rear surround speakers towards the listening area.
Center Speaker Setup
The ELAC UCR52 center channel speaker is designed to produce dialog sounds and
should be positioned above or below (Fig. 5) your television. Align it with
the center of the television. As much as possible, try to keep the UCR52 close
to the same level (height) as your front speakers for a more even sound stage.
Keeping the same height for the center channel can be very challenging so it
might be necessary to tilt the center speaker up (if too low) or down (if too
high), to aim it towards the listening area.
Optimal results for the center are obtained by setting the receiver/processor center channel size to small. If you have a choice, set the crossover frequency between 50Hz and 100Hz.
SPECIFICATIONS
Model | UBR62-BK / W | UFR52-BK / W | UCR52-BK /W |
---|---|---|---|
Frequency Response | 41Hz – 35000Hz | 40Hz – 35000Hz | 47Hz – 35000Hz |
Nominal Impedance | 6 Ohms | 6 Ohms | 6 Ohms |
Sensitivity | 85db | 86db | 85db |
Crossover Frequency | 260 / 1800Hz | 220 / 1800Hz | 240 / 1800Hz |
Max Power Input | 140 Watts | 140 Watts | 140 Watts |
Tweeter | 1″ Soft Dome | 1″ Soft Dome | 1″ Soft Dome |
Midrange | 4” Aluminum | 4” Aluminum | 4” Aluminum |
Woofer | 6.5” Aluminum | Triple 5.25” Aluminum | Dual 5.25” Aluminum |
Cabinet | CARB2 Rated MDF | CARB2 Rated MDF | CARB2 Rated MDF |
Cabinet Finish | Satin white with Oak Sides |
or Satin Black with Walnut Sides
| Satin white with Oak Sides
or Satin Black with Walnut Sides
| Satin white with Oak Sides
or Satin Black with Walnut Sides
Port| Dual Flared Slot| Dual Flared Slot| Dual Flared Slot
Binding Posts| Bi-Wire 5 -Way| Bi-Wire 5 -Way| Bi-Wire 5 -Way
Dimensions (WxHxD)| 208 x 359 x 334
(8.19” x 14.13” x 13.15”)
with grill
| 234 x 995 x 338
(9.21” x 39.17” x 13.31”)
with grill & base/feet
| 527 x 185 x 334
(20.75” x 7.28” x 13.15”)
with grill
ELAC Americas Inc.
North America Limited Liability Warranty
Passive Speakers (No Built-in Amplifier)
ELAC Americas Inc. warrants to the original purchaser that this product be
free from defects and or workmanship for a period of 3 (Three) years from the
original date of purchase. During this time period, repair or replacement of
parts will be free of charge to the original owner (See below limitations).
Shipping to and return from the repair center will be the responsibility of
the original purchaser.
Limitations
- Warranty begins on the date of original purchase from an authorized ELAC Americas Inc. dealer.
- Product is warranted only if used in home applications within the max power rating specified in this manual. Commercial use of this product is not warranted.
- Product that has been modified or altered in anyway will not be warranted.
- Product that has been abused or subjected to faulty equipment will not be warranted.
- Products with defaced or removed serial numbers will not be warranted.
If service is required
In the event that service is required, please contact ELAC America at
888-541-0996 or at
customerservice@elac.us to arrange for service or
replacement. You will be responsible to provide proof of purchase (Copy or
original sales receipt). Shipping to and from our repair center will be the
responsibility of the original purchaser.
Warranty Outside of North America
This warranty applies to products purchased in the United States and Canada.
For warranty claims outside of North America please contact the local
dealer/distributor in the country of purchase.
ELAC Uni-Fi Reference Speakers | www.elac.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>