anko 43203925 LED Alarm Clock Instruction Manual

anko 43203925 LED Alarm Clock Instruction Manual

****

Safety instructions

Please read all safety instruction warnings carefully before using this product. Improper use of this product may result in  damage to this product. To ensure the production works well, please never use this in the following conditions:

1. Moist or underwater conditions.
2. Near heater or high temperature service.
3. Direct and strong sunshine.
4. Do not use chemical solvent on cleaning this product.

Packing contents

• LED Alarm clock x 1
• DC cable x 1
• User manual x 1

Using the clock

Battery mode

1. Insert 4 x AAA batteries into the battery compartment at the back of the clock, ensure the polarity of the batteries match the polarity inside the battery compartment.
   USB Power mode

2. Plug in DC cable (included) with a DC 5V 1A above USB adapter (not included).
   NOTE: Once power off, all setting will back to default setting

Product Overview

Function description

DP-1

| Display mode 1: time, date and temperature alternately display
---|---

DP-2

|

Display mode 2: Fixed time display

ON:Sd

|

Sound activate mode is ON

–:Sd

|

Sound activate mode is OFF

LO/L1/L2/ L3

|

LED Brightness level

TIME SETTING

1. Long press SET button to enter setting menu. The setting article will flash, press UP Button or DOWN Button to select the year, once confirmed, press SET. Repeat the step to set the month, day and time.
2. The overall setting sequence: Year->Month->Day->12/24H -> Hour -> Minute ->Alarm 1 ->Alarm 2 ->Alarm 3  > Soundc ontrol Mode -> Quit
3. The setting will be confirmed and exited without any operation in 15 seconds.

ALARM SETTING

1. Long press SET button to enter setting menu. Short press SET button repeatedly to skip Year to Minute setting. When LED display“–:A1”/”–:A2”/”–:A3” to enter Alarm setting. The alarm clock setting will keep flashing, press UP Button or DOWN Button to set. Once confirmed, press SET. The setting sequence: Alarm 1 ->Hour -> Minute ->Alarm 2 -> Hour -> Minute->Alarm 3 -> Hour -> Minute.
2. Press UP or DOWN button to enable or disable your desired alarms. “oN:A1”/ “oN:A2”/ “oN:A3” = Alarm 1/2/3 is ON “–:A1”/”–:A2”/”–:A3” = Alarm 1/2/3 is OFF
3. The setting will be confirmed and exited without any operation in 10 seconds.
4. Press any button to stop the alarm.

DISPLAY MODE SETTING

• Short press SET button to switch display mode between “DP-1” and “DP-2”.
• “DP-1” = time, date and temperature alternately display
• “DP-2” = time fix display

TEMPERATURE DISPLAY SETTING

Short press UP button to switch temperature display between °C and °F.

LED Brightness Level Setting

• Long press UP button to enter LED brightness level setting.
• Short press DOWN button or UP button to decrease or increase brightness level L0, L1, L2, L3
  Note : L3 level is default brightness.

Sound activate Mode (Power Saving)

Short press DOWN button to enable/disable sound control function.

1. “oN:Sd” = Sound activate mode is ON. The clock LED display will stay on and then turn off automatically. You can turn it ON by clap or make noise.
2. “–:Sd” = Sound control mode is OFF. Display will permanently stay On.
   Note: When use AAA batteries only, sound activate mode is suggested to turn on for energy saving.

RESET Setting

Press RESET button by using needle (not included) to resetting the clock setting.

Warranty

12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law.

Kmart will provide you with your choice of a refund, repair or exchange (where possible) for this product if it becomes defective within the warranty period. Kmart will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.

Please retain your receipt as proof of purchase and contact our Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help at Kmart.com.au for any difficulties with your product. Warranty claims and claims for expense incurred in returning this product can be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Note: For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.

References

• Kmart.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>