AiXun DT01 Smart Digital Display Thermometer User Manual
- June 3, 2024
- AiXun
Table of Contents
DTOl
Smart Digital Display
Thermometer
User Manual
Please read this manual carefully before use
DT01 Smart Digital Display Thermometer
Cautions
To ensure the safety of the equipment and personnel and the accuracy , the
following items should be observed. ****
- Precise device, please handle with care.
- High temperature, non-professionals do not operate at will.
- High precision sensor (dia:0.2). Do not pull or press.
- Do not touch the surface beyond the measure point with soldering tips in high temperature
- Alcohol can be used to clean up any flux attached to the point. Do not use — diluter or volatile oil.
- Please replace the component in time when it reminds with [Abnormal component].
- if it shows in icon, please replace the battery to guarantee the normal measurement.
Product Features
DT01 smart digital display thermometer includes the following features
- Simple and fashionable appearance, easy and convenient for use.
- OLED HD display, smart and digital, clear and intuitive.
- Thermocouple and K-type socket design, enables to measure the temperature of soldering tips, hot air gun, surface, liquid, etc.
- Precise measurement,accurate, stable and efficient, built-in temperature curve record ”’ and replay.
- Supprot type-C cable and bluetooth transmission, support temperature calibration by ‘1. matching with AiXun soldering stations.
- Smart Al function, auto reminder of low battery, auto report of failure components, auto w shut down at standby time.
- Continuous software upgrade. Connect the device to AiXun platform by a USB cable to ‘w enjoy auto software upgrading.
List of Packing
The package of DT 01 includes the following components
Parameters
| Model:DTO1 | Dimension: 117.76536mm | N.G.:100g |
|---|---|---|
| Working temp: 0-40C° | Components: Trigngle temp sensor/K-type thermocouple | |
| Temp range: 0-500°C | DPI:1°C | Accuracy: +3°C |
| Type-C input: 4.8-5.5V | Display:OLED | Battery: 9V alkaline dry cell |
Icons
Operating steps
Operation steps of DT01
Stepl
Put the red side of sensors in the red end, the blue sidein the blue end, and
the silver side in the above end.
Step2
Click the power switch , start operating when the temperature shows onthe
screen
Step3
Click the °C/F key t o switch °C and °F. °Cis generally used.
Step4
Before testing, add some tin on the soldering iron tip, the soldering tip
should be 45 ° from the test point. (Please keep the tip clean)
Step 5
When the temperature is stable, press the “MAX HOLD” key and it will display
at the lower right of the window. At this time, the thermometer will keep the
current maximum temperature tested and record the data. Press “MAX HOLD”
again to start anew measurement.
Step 6
After use, clean the residue, press the power switch to shut down the device,
and finish the measurement.
After-sale Service
Warranty regulations
- Theproductis guaranteed for one year from the date o f purchase (subject to the purchase certificate).
- Thewarranty service is only valid under normal use. All man-made damage, such as improper use of accessories, failure to use according to instructions, damage not caused by our company’s repair, wrong use or negligence, the warranty service will immediately invalid.
- Thecompany has the final r i g h t to interpret the above regulations for users who do not comply with the above regulations.
Address: 503, Building C4, Zhonghao Industrial City, Xiangjiaotang
Community, Bantian Street, Longgang District, Shenzhen
Hotline: (+86) – 400 175 8688
Official website: www.aixuntech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>