AiXun H314 Smart Hot Air Gun User Manual

September 9, 2024
AiXun

AiXun H314 Smart Hot Air Gun

Product Features

Heating core with 1400W rated power, rapid heating up; smart as usual, with higher air speed and greater power

  • 3.5 inch IPS HD display screen, built-in with smart operation system
  • Built-in with a fingerprint function, support fingerprint recognition and automatic switch of multiple accounts
  • Bluetooth WiFi interconnection, more stable through OTA upgrade; support Al smart voice central control
  • Heating core with 1400W rated power, heating up to 380°C in 3 seconds under top speed mode
  • Soft, standard, top speed modes and design of 9 channels, switch 5 sets of accounts by fingerprint, maximum 45 sets can be saved
  • Dual combination of segment and curve desoldering, saving of exclusive users private Cloud data, support the upgrade of various APPs
  • Air nozzle adopts patent design of spring lock, solving the problem that air nozzle swapping might be stuck under high temperature
  • Adopt patent design of 3D air nozzle, combining with self-designed temp control algorithm and the design of all-in-one air channel

Structures Instruction

Accessories

Product Parameters

Product name: Smart Hot Air Gun Temp range: 100-500°C
Model: H314 Display screen: 3.5inch IPS
Rated power: 1400W Input voltage: 230V~ 50Hz
Communication: Type-C / WIFI / Bluetooth Air flow gear: 1%-150%
Blowing type: Smooth wind/Spiral wind Air flow: 15-S0m/s

Product Operation

Introduction of main interface

Curve interface

Normal desoldering system curve

  • Press “SET” button to enter the curve interface
  • Rotate “Temperature knob” to adjust the set temperature
  • Rotate “Air speed knob” to adjust the set air speed
  • Press “Ml, M2 and M3 buttons to switch memory shortcut channel
  • Press “SET” button to exit and back to the main interface

Curve desoldering system

  • Press “SET” button to enter the curve interface.
  • Press “Air speed knob” to switch to curve desoldering system {There are five inflection points, users can set the starting point of the curve desoldering at will).
  • Rotate the “Air speed knob” to select any inflection point Press the “Temperature knob” to set the starting point of the curve desoldering Press the “Ml, M2, M3” buttons to view the values of the shortcuts.
  • Press the “SET” button to exit and back to the main interface.

Value settings of curve desoldering

  • The “temperature, air speed and time” of each inflection point can be set; press “Ml (last line) or M2 (next line)” to switch among each inflection point
  • Press the “air speed knob/temperature knob” to switch the “temperature, air speed and time” of each inflection point Rotate the “air speed knob/temperature knob” to adjust the “temperature” , “air speed” or “time”
  • After setting, long press the “SET” button to save the data, or long press “Ml-M3” to save the value to the shortcut channel; Press the “SET” button to exit and back to the main interface

Segment desoldering

  • Press the “STE” button to enter the curve interface.
  • Press segment “Air speed desoldering knob” to system switch to the Press values the of “Ml, the M2, M3” shortcuts buttons to view.
  • Pick up the handle to start working to Press the “Set” main button interface to exit and back.

Value settings of segment desoldering

Note: Segment is selected: there is a color block at the bottom “Temperature/ air flow/ time” is selected: the selected bar will flash.

Desoldering parameters

  • Long press the “SET” button to enter the expanded applications interface.
  • Press “M2 (next)” and select “desoldering parameters” interface.
  • Press the “SET” button to enter the interface.
  • Press “Ml (last) or M2 (next)” to switch the desoldering parameters of “remove CPU without glue, install CPU, remove Android Nand, iPhone glue removing, remove motherboard socket”, etc.
  • Long press the “Ml, M2, M3” buttons to save the selected parameters to the shortcut channels of different modes.
  • Press “Set” button to exit and back to the main interface. You can directly call the shortcut channel in the operation interface.

System settings

  • Long press the “SET” button to enter the expanded applications interface, select on the “Settings” icon
  • Press “SET” to enter this interface
  • Users can adjust the corresponding parameters according to their needs, press “Ml (last) or M2 (next)” to switch the parameters of “Language, sounds, standby air speed, WIFI, fingerprint, theme, device info, update and restore”
  • Select the parameters to be set, press the “SET” button to enter the setting interface
  • ( For example: If you need switch language, select on the language, press the “SET” button to enter this interface, then press “SET” again to set the needed language, after setting, press “M3” to go back)

Online Upgrade/ WIFI OTA Upgrade

WI-Fl setting
Connect the device with WiFi through mobile phone (only support 2.4G WIFI network configuration so far)

Method 1: Configure network through AiXun official account

  • Follow [AiXUN] official account on WeChat or scan the QR code. Find [AiXUN Assistant] in “Product Information” or scan the QR code on the “WIFI Setting” interface
  • Save mobile phone WiFi as connected state and Bluetooth as ON
  • Find your device code, click Connect, enter the password> Confirm to send, and wait for the connection to complete Check device code: Check the device name and other information in “Device Info” in Settings.

Method 2: Configure network through WeChat mini program

When the device is connected to WI Fl for the first time, please use the “AiXun Assistant” on WeChat mini program.

  • Enter the “AiXun Assistant” mini program

    • Option 1: Scan the QR code below to enter the AiXun Assistant mini program
    • Option 2: Search the “AiXun Assistant” mini program on WeChat
    • Option 3: Connect through “AiXun Platform”. Click the ”WIFI” icon on the upgrade interface of H314, then a ”WeChat mini program
      QR code” will appear.
  • Find the corresponding device
    Enter the “AiXun Assistant” mini program, you will see the device list, find the corresponding product model, and click “Connect”] (Allow to use when the Bluetooth is turned on or when the Bluetooth requests to use mini program. When there are several H314at the same time, check the machine code in device information and then connect accordingly) Check device code: Check the device name and other infonmation in “Device Info” in Settings.

  • Connect successfully
    Wait for connection. After the first successful connection, there is no need to connect again for the second time. The device will connect with WIFI automatically next time.

WI FI/Bluetooth connection states

Software upgrade

  • Method 1: WIFI networking and upgrade software via OTA
    • According to the WIFI settings and connection method, after connect the device with WIFI, the software can be upgraded to the latest version on the device, no data cable is required
  • Method 2: Connect to the computer via Type-C data cable to upgrade
    • A Type-C data cable interface is reserved on the device which can be connected to a computer. Open [AiXun Platform], it will identify the connected device automatically.
    • Select the latest software version to upgrade, and wait until the upgrade is complete

Fingerprint Setting

  • Long press the “SET” button to enter the expanded applications interface, select on the “Settings” icon Press “SET” to enter this interface.
  • Press “Ml (last) or M2 (next)” to select on “Fingerprint”
  • Press “Set” button again to enter the fingerprint users interface
  • Press the “SET or Air Speed Knob or Temperature Knob” button to turn on/off the fingerprint password;

Add fingerprint

  • Press “M 1 (last) or M2 (next)” to select “Add fingerprint”; Then press the “SET” button to confirm adding fingerprint.
  • Users need to set a lock screen password, please use Ml, M2, M3 to set the password.
  • After setting the lock screen password, press the fingerprint, and after the fingerprint is fully filled in, press “SET” button to confirm. After setting, press the “M3” button to go back

Air Nozzles Replacement

Simple and convenient operation, easy to learn.

Precautions

  • To avoid damage to the hot air gun and consider safety of the working environment, the following matters shall be observed:
  • The product uses a three wire grounding plug, which must be inserted in a three hole grounding socket. Do not change the plug or use an ungrounded three plug adaptor to avoid poor grounding. To lengthen the wire, please use a grounded three wire power cord.
  • Built-in precision electronics, non-professionals please do not disassemble without authorization.
  • Please adjust strictly according to the official parameters. Do not exceed the value range to prevent product damage and malfunction.
  • The hot air gun should not be used by children or untrained personnel; do not use the station as a hair dryer
  • Please do not mix metal flakes and wire debris into this product, otherwise it may cause electric shock, fire, or failure.
  • Replace fittings with original accessories.
  • If it is in idle for a long time, please place it in a dry environment.
  • Do not get the hot air gun wet, or do not touch the hot air gun with wet hands nor pull the power cord.
  • Please strictly follow this manual when using.

After-Sale Service

Warranty regulations:

  • The product is guaranteed for one year from the date of purchase (subject to the purchase certificate).
  • The warranty service is only valid under normal use. All man-made damage, such as improper use of accessories, failure to use according to instructions, damage not caused by our company’s repair, wrong use or negligence, the warranty service will immediately invalid.
  • The company has the final right to interpret the above regulations for users who do not comply with the above regulations.

Phone: (+86)400-875-9688
Website:www.aixun.com
Address: Room 402(403), 4th Floor, Building 2,
IOT Industrial Park, 4012 Wuhe Blvd, Bantian Street, Longgang District, Shenzhen.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals