AiXun T3B Intelligent Soldering Station User Manual

AiXun T3B Intelligent Soldering Station

Caution Notice

Station Caution Notice

To avoid station damage and keep safe working environment, the following items should be observed:

• This product uses a three-wire grounding plug, which must be inserted into a three-hole grounding socket. Do not change the plug or use an ungrounded three-terminal adapter. To lengthen the wire, use a grounded three-wire power cord.
• Do not make any changes to the station without permission.
• When replacing parts, original factory parts should be used.
• Do not wet the soldering station. Using the station or pulling the power cord with wet hand is forbidden.
• There will be smoke during soldering, the working environment should have good ventilation facilities.
• When using the station, do not do anything that may harm the product.
• Keep the station in a dry environment if not use it for a long time.

Soldering Iron Tip Caution Notice

When the power turns on, the soldering tip is in a high-temperature state, as abuse may cause burns or fire, please strictly observe the following:

• Avoid the abuse of this soldering station, follow operating instructions to use.
• Do not touch the metal part near the tip of the soldering iron.
• Do not use soldering iron near flammable objects.
• Inform other personnel that the soldering iron tip is easy to burn and may cause dangerous accidents. Turn off the power during rest or after completion.
• Do not strike the soldering iron on the workbench to remove the residual flux, which may seriously damage the soldering iron.
• Do not use a soldering iron tip for other work other than soldering.

This product has anti-static measures, please be sure to use grounding

Product Features

T3B intelligent soldering station has the following characteristics

• It can be automatically updated by connecting to the AiXun platform, and the function of the soldering station software can be upgraded infinitely.
• 210/115 soldering pen nano-precision welding, extremely fast heating, 2 seconds melting tin.
• Intelligent recognition of soldering target and environment, intelligent power compensation and automatic protection.
• 2.4-inch color display, 100-500 °C temperature adjustable, with real-time dormancy induction.
• Support T210, Tl15 two handles, automatic identification of model and working status
• Personal habit temperature self memory, three channels temperature fast switching, knob adjustment
• The host has a built-in environment temperature sensor to avoid high temperature operation
• Automatic record of working time, an automatic reminder of fatigue operation
• Super anti-static isolation design, meet the industrial ESD standard
• Connect to the AiXun platform to customize the personalized startup interface

Parameters

Station Host Parameters

Soldering Iron Parameters

Parts Introduction

Soldering station introduction

Soldering pen selection

Interface Introduction

1. Soldering station mode
2. Boot time
3. Chassis temperature
4. Handle model
5. Power
6. Settemperature display
7. Firmware version
8. Workingstatus
9. Real-time temperature display
10. Fasttemperature switch

Intelligent Soldering Station Handle Holder

Station Usage

Operating mode

• Lift the handle from the holder and the soldering tip automatically heat to the selected temperature.
• Changethetemperaturesetting(lOO~45O°C) rotate ±5
• Through the settings menu · Change the quick temperature setting

Standby mode

• The handle is placed in the stand, the host will automatically enter the standby mode, and the temperature will drop to the Preset sleep temperature
• Change the standby temperature can be customized)
• Through the settings menu · Change the standby delay(Sleep delay time can be customized)

Sleep mode

• The handle is placed in the holder for a long time, the temperature will automatically drop to the preset sleep temperature.
• Through the settings menu
• Change the sleep time
• (No heating after sleep,default30 minutes, time can be customized)

Rest screen mode

• Through the settings menu
• The screen rest time can be customized, and the screen is not off by default

Soldering tip use & maintenance

Note: Do not clean the oxide on the soldering tip with a grater

• Set the temperature to 250 degrees Celsius (482 degrees Fahrenheit).
• After the temperature is stable, clean the tip with the soaked sponge and check the status of the soldering iron.
• If there is oxide, plate a new tin layer, then clean it with the sponge.
• If the soldering tip is deformed or heavily rusty, you must replace a new one.

Use of the soldering tip

Temperature calibration for the soldering tip
Recalibrate to avoid temperature deviation if changing a different type of soldering tip.

Possible reasons for failed tin staining

• Did not cover the tip with tin in idle state
• The soldering tip stays in a high temperature state
• Insufficient melting during welding
• Scrub the iron tip on a dry or unclean sponge or cloth| Clean, moist, industrial grade,the  sulfur-free sponge should be used]
• The solder or iron coating is not pure, or the welding surface is not clean

Solution for failed tin staining

• Remove the tip from the handle after the tip cooled
• Remove the dirt and oxide from the tin surface of the iron tip by using 80# Yaan ester, abrasive foam or 100# emery paper.
• Put the soldering tip into the handle and use the tin wire containing rosin ( $ 8 mm above) to wrap the newly exposed tin layer surface of the tip, and turn on the power supply of the soldering station.

Note: proper routine maintenance can effectively prevent the soldering tip from failing tin staining.

Temperature regulation of soldering tip
The temperature of different types of iron tips may be different.
The best way to adjust is by temperature calibration, or by using the temperature control knob based on the applicable temperature of each type of iron tip.

Prolong the lifespan of the soldering tip

• Soak with fresh solder after each use, to prevent oxidation and prolong its service life.
• Apply the temperature as low as possible to fulfill the work, low temperature can not only reduce the oxidation of the iron tip, but also easy to weld.
• Use a thin iron tip only in necessary, the coating of a thin iron tip is not as durable as that of a thick iron tip.
• Do not use the soldering tip as a detection tool, bending of the soldering tip will lead to the rupture of the coating and shorten the service life.
• Use less active rosin flux, because the high content of active rosin will accelerate the corrosion of iron head coating.
• When not in use or stop soldering, put the handle into the dormancy stand or turn off the power in time.
• Do not exert heavy pressure on the soldering tip, higher pressure does not mean fast heat transfer. In order to provide heat transfer, the solder must be melted to form a heat transfer solder bridge between the soldering tip and the solder joint.

Aftersales

Warranty Regulations

• This product is guaranteed for one year from the date of purchase (subject to the purchase certificate).
• The warranty service is only valid under normal use. All man-made damage, such as improper use of accessories, failure to use according to instructions, damage not caused by our company’s repair, wrong use or negligence, the warranty service will be immediately invalid.
• The company has the final right to interpret the above regulations for users who do not comply with the above regulations.

Address: 503, Building C4, Zhonghao Industrial City, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
Hotline: (+ 86) -400 175 8688 Official website: www.aixuntech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>