Pyle PLCMDVR72 Dash Cam Car Recorder User Manuals
- June 3, 2024
- Pyle
Table of Contents
Pyle PLCMDVR72 Dash Cam Car Recorder
INTRODUCTION
Please read instructions carefully before installation and use. Installation
should be performed by a professional installer. To ensure your safety, the
driver should not watch videos or operate features on the monitor while
driving. There are no serviceable parts in this unit, do not disassemble or
try to repair this unit. If the unit malfunctions please return to your vendor
or send to a Pyle repair facility. Please observe and obey the local laws and
regulations when installing the unit.
Upon Installation, please make sure as to not to interfere with any of the
vehicle’s safety features, wiring, components, etc. We are not responsible for
any damages, injury, malfunctions or otherwise noted due to faulty or
non‐professional installation. Wires to assist in the video camera system
setup. See the wiring diagram for connections between cameras, monitor and
your vehicle.
This model is with one 7 inch quad monitor with RCA jack, and with 2 mini DVR
recorder, and with one super slim license plate backup camera. The 2 mini DVR
and backup camera can connect to the 7 inch quad monitor for display. The mini
DVR need to insert the TF card( we suggest use class 10 TF card), can be
installed one DVR for front view recorder, and the other DVR can be installed
for inside of the car recording. The super slim bar style backup camera is for
reverse and parking.
MONITOR WIRING & CONNECTION
- Red and black wire is for 12V power
- Green wire is Reverse trigger cable
- The 2 yellow RCA jack and red and white RCA jack is the 4 ch video input.
The Reverse trigger cable is for the Ch1, so please connect the reverse backup camera to the Ch1, so when the truck in reverse status, the reverse camera would be priority.
2 PCS MINI DVR CONNECTION
There is 2 pcs of this mini DVR included in the package for recording( one may
installed at the windscreen for front view driving recording, and one can be
installed at inside the car for recording ,or other placed customers want to
installed)
The DVR cable red and yellow cable is for 12V power, and black for GND, the
yellow video jack is video output, connected with the 7 inch monitor for
display.
BACKUP CAMERA CONNECTION
MONITOR BUTTONS
- V1/V2: change the mode, 1 ch, 2ch,3ch,4ch display
- This button for reverse the picture image left and right
- Menu: Adjust the color, brightness, etc.
- Power button
- Increase/Decrease
REMOTE CONTROL
MONITOR STAND MOUNTING
- Set the mount stand in the desired location, and then use screws to secure the mount stand into location. Please make sure as to set a location free from vehicle obstruction include ng any wiring, or location where it may obstruct the driver’s view, driving conditions, etc.
- Attach the metal buckle piece on top of the fan shaped mount stand, and slide it into the receiving slot in back of the display monitor assembly. This metal buckle should slide in and up to the monitor assembly.
- Set the desired position/height of the buckle into the monitor assembly.
- Tighten the clamp‐style knob in the back of the stand mount to secure the monitor in the desired position.
- The angle / tilt position of the stand mount is also adjustable. Located toward the base of the stand mount is another clamp‐style knob.
FAQs
Yes, it has both an auto record & loop recording function as well as a G-Sensor Impact Video File Auto-Saving feature.
Yes, it has both an auto record & loop recording function as well as a G-Sensor Impact Video File Auto-Saving feature.
When driving, may the licence plate camera record?****
The license plate camera only serves as a backup rearview; the other two dash cameras can capture movies. Please visit our website, pyleaudio.com, for more information. Enter PLCMDVR72 in the search box as the model number.
How long are the backup camera’s cables?****
Two feet of cable extends directly from the computer to the camera. The male to male extension video cable measures 17 feet in length.
How many hours can you record on Pyle PLCMDVR72 dash cam?****
At 1080p resolution, you can theoretically record for 90 minutes or 1.5 hours on a 32 GB memory card. 200 minutes, or 3.3 hours, of video can be captured if you choose to lower the resolution to, say, 720p.
Do Pyle PLCMDVR72 dash cameras record all the time when car is off?****
The cigarette lighter port in your car provides power to the majority of dash cameras. When your car is not running, this is not active. Therefore, the majority of dash cameras are inoperative when your car is not in use. However, you can purchase dash cameras that provide 24/7 security.
What are the disadvantages of Pyle PLCMDVR72 dash cam?****
If you’re in a collision, the dash cam video may be used as evidence. Even if you might believe you’re blameless, the video might show otherwise! Even if the video does demonstrate your innocence, it’s not certain that it would be admitted into evidence should you ever find yourself in court.
Can Pyle PLCMDVR72 dash cam record when car is parked?****
Some dash cams have a feature called “parking mode” that enables them to keep recording even when your car is parked and off. The only time your car is being watched is when you are driving because basic dash cams without a parking mode will turn off when your car is not in motion.
Does Pyle PLCMDVR72 dash cam still record while parked?****
Most higher end Dash Cams provide a dependable and simple Parking Surveillance option. It enables the Dash Cam to carry on recording video even when the car is parked and the engine is turned off. You can record events that are occurring near or around your car using this feature.
Does Pyle PLCMDVR72 dash cam drain battery when car is off?****
Because a dash cam put into one of these 12V adapters won’t shut off, it will continue to operate constantly and deplete your car’s battery until it is completely dead. However, the battery is recharged when you restart your car and begin to drive.
Can I see my Pyle PLCMDVR72 dash cam live on my phone?****
Using the Garmin Drive App, you can watch live video from your dash cam. In order to show a live video feed so you can move the camera, the dash cam connects via Wi-Fi to the phone.
Is GPS necessary for Pyle PLCMDVR72 dash cam?****
While GPS is not necessary in a dash cam, it can assist you in giving the police or an insurance company useful information when you must share the footage with them. It will identify speed limit signs and the speed you were travelling before impact, which you can use to your advantage when attempting to establish your innocence.
How long does parking mode last on Pyle PLCMDVR72 dash cam?****
Depending on the car battery and voltage-cutoff setting, the dash cam will usually hardwired record in parked mode for about 8 hours. To safeguard your automobile battery, the dash cam will shut off once the cutoff threshold is reached.
Can I leave my Pyle PLCMDVR72 dash cam on overnight?****
Leaving a dash camera in your car overnight if it doesn’t have parking mode may draw unwanted attention. When that occurs, it’s crucial to keep in mind to take the object out of the windscreen as soon as you can.
How long does Pyle PLCMDVR72 dash cam battery last?****
When the engine is turned off, the battery takes over and provides enough power for the dash to operate for up to 72 hours for a single channel dash cam or about 36 hours for a dash cam that records both forward and backward.
How do I turn off my Pyle PLCMDVR72 dash cam?****
When a device is plugged into an outlet with an ignition switch, it automatically shuts off when the car is turned off. Disconnect the camera from power to turn it off manually.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>