BASS JAXX EP-0719 True Wireless Earbuds Instruction Manual
- September 17, 2024
- BASS JAXX
Table of Contents
ACTIVE NOISE CANCELLING SMART
CASE TRUE WIRELESS EARBUDS
INSTRUCTION MANUAL
EP-0719 True Wireless Earbuds
Thank you for purchasing the Active Noise Cancelling Smart Case True Wireless Earbuds. This manual provides more information about this product, please read the instructions before using.
Product Overview
- Touch Control Area
- Multifunction Touchscreen
- Smart Case On/Off Button
- USB Type-C Charging Port
Instruction Manual USB Type-C Charging Cable
Package Contents
1(One) Pair Earbuds 1.22in. x 0.91in. x 0.83in. (3.1cm x 2.3cm x 2.1cm) each
1(One) Portable Charging Case 2.36in. x 1.81in. x 1.02in. (6cm x 4.6cm x
2.6cm)
1(One) USB Type-C Charging Cable 11.8in. (30cm)
1(One) Instruction Manual
Specifications
| Driver Diameter: | 10 mm |
|---|---|
| Impedance: | 32 Ohms |
| Frequency Response: | 20 Hz – 20 kHz |
| Sensitivity: | 98 dB +/- 3 dB |
| ANC: | -18 dB +/-3 dB |
| Earbud Battery Capacity: | Li-ion 3.7V 30 mAh Per Earbud |
| Charging Case Battery Capacity: | Li-ion 3.7V 380 mAh |
| Bluetooth Version: | 5.3 |
| Bluetooth Range: | 32.8 Feet |
| Playtime: | 6-8 Hours (BT+ANC) |
8-10 Hours (BT only)
Charging Time:| 2 Hours
USB Type-C Charging Cable Included
USB Type-C Charging Cable Rating 5V/1A Max.
Power On/Off
Power On the Smart Case
Press and hold the On/Off button for 5 seconds and the Multifunction
Touchscreen will be On.
Note: Press and hold the On/Off button for more than 8 seconds will reset
the Smart Case.
Power Off the Smart Case
Double click the On/Off button, and then select Power Off on the Multifunction
Touchscreen.
Power On the Earbuds
When the Smart Case is powered on and the earbuds are inside the Smart Case,
open the cover will turn on the Earbuds.
Power Off the Earbuds
Place the Earbuds in the Smart Case and close the cover will turn off the
Earbuds.
Pair the wirelless earbuds with your mobile device
- Keep the distance between the earbuds and mobile device within 32.8 feet,
- De-activate the Bluetooth function on your mobile device.
- Put the earbuds back to charging case before use. Take both earbuds out from charging case and wait for 3 to 5 seconds for auto pairing.
- Activate the Bluetooth function on your mobile device and select “EP-0719 TWS” from the list shown.
Reconnect the wireless earbuds to your mobile device
When powered on, the wireless earbuds will automatically connect with the last
successfully paired device.
Disconnect the wireless earbuds from your mobile device
Power off the wireless earbuds; or
Switch off the Bluetooth on your mobile phone; or
Leave the earbuds 60ft away from your mobile phone or further.
Answer/Reject a call
When receive a call, press the touch control area once (on either earbud) to
accept the call, or answer the call normally via your mobile phone,
Double tap the touch control area to reject it.
End a call
To end the call, just press touch control area at any side of earbud.
Functions
Play/Pause Music: Single tap on the touch control area.
Go back to previous song: Double tap the left touch controll area.
Advance to next song: Double tap the right touch control area.
Volume down: Triple tap the left touch control area.
Volume up: Triple tap the right touch control area.
Active Noise Cancelling(ANC) and Transparent mode: Press and hold the
left touch control area for 2 seconds.
Charging your Earbuds
Voice Assistant: Press and hold the right touch controll area for 2 seconds.
- Open the charging case cover,
- Insert the Earbuds into the charging case and close the cover.
- The earbuds will start the charge automatically.
- Earbuds battery level will be displayed on the screen.
Note: If the charging is not start, take out both earbuds from the charging case and insert again after few seconds.
Multifunction Touchscreen Smart Case
Recharge Charging Case
For your safety, please always use appropriate 5V output charger/Adapter to
charge the product.
DO NOT USE Quick Charging USB Adapter to charge the product, as it might
damage the product.
- Use the USB Type-C charging cable provided with the packaging.
- Connect the USB plug to a USB port on a wall adapter, then connect the USB Type-C plug to the USB Type-C charging port on the charging case to begin charging
- Charging icon and the battery level will be displayed on the screen during charging.
- The battery level will be 100% when fully charged.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the charging case and earbuds if it has been not used for more than 6 months.
CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product.
FAQ
If the wireless earbuds cannot be paired with your device please try the following:
Ensure that your earbuds are in pairing mode or reconnection mode. Ensure that Bluetooth search function of your mobile device is activated.
If the wireless earbuds will not turn on:
Make sure the earbuds are fully charged. Make sure the protective stickers are moved from the Earbuds.
Can I change the battery for the earbuds and the charging case?
The wireless earbuds and the charging case use a built-in non-detachable battery which cannot be removed.
If the charging case cannot be recharged:
If you use a power outlet, ensure that the power supply is connected securely and the outlet works.
Safety instructions for the lithium battery and charging the product
-The input voltage to the product is 5V 1A.
-In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product,
Only charge the product at ambient temperatures between 10 °C/ 50 °F and 40
°C/104 °F
– Do not heat above 70 °C/158 “F, eg. Do not expose to sunlight or throw into
fire, -Switch off the product after use.
Please note that we won’t take any responsibility for any wrong operation (eg.
Voltage higher than 5V) as this may result in severe injury or loss of
property, and we cannot control the operating process during the time the user
using this product.
-In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development,
FCC Statement
This device complies with the part 15 of the FCC rules, Operation is subject
to the following two conditions: (1) this device may not cause harmhal
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation,
Caution: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digitall device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation, If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/ TV technician for help.
RF warning statement:
The device has been evaluated to meet generall RF exposure requirement. The
device can be used in portable exposure condition without restriction.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc, and any use of such marks by 1616 Hoklings. Inc, is under Icense.
Other trademarks and trade names are those of their respective owners.
FCC ID: 2ADM5-EP-0719
FCC ID: 2ADM5-EP-0719-C
Keep all relevant information for future reference
Item# EP-0719
Distributed by 1616 Holdings, Inc,
701 Market Street, Suite 200 Philadelphia, PA 19100
Made in China
Documents / Resources
| BASS
JAXX EP-0719 True Wireless
Earbuds
[pdf] Instruction Manual
EP-0719 True Wireless Earbuds, EP-0719, True Wireless Earbuds, Wireless
Earbuds, Earbuds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>