final ZE2000 True Wireless Earbuds User Manual

final ZE2000 True Wireless Earbuds

Package Contents

Part Name

Power/Charging

Charging the charging case:
Connect the accessory USB charging cable(C) connector to the USB port on the charging case and connect the USB(A) connector to an electrical appliance or adapter with the same shape of connector and the internal battery within the charging case will begin to charge. While charging, the LED Indicator of the charging case will light up in a different color depending on the battery power level of the charging case as shown in the table below.

Charging the earphones:
Return the earphone units back to the charging case and the LED Indicator of the earphone units will light up and start charging. By closing the charging case, the power of the earphone units will be turned OFF and the LED Indicator of the charging case will start flashing depending on the battery level of the earphone units as shown in the table below.

• LED Indicator of the charging case shows the battery level of the charging case by lighting up in a designated color as shown in the table under P.4 during the first 5 seconds after the case is closed.
• While both charging case and earphone units are simultaneously charged, the LED Indicator of the charging case will take turn to show the battery level of both. Example) Charging case at 50% and earphone units at 50%: The LED Indicator of the charging case will switch between Yellow and Blue in turn for every 1 second.

Turning ON the Earphones

After opening the charging case, the LED Indicator of the earphones will lights up Red for 3 seconds and the power of the earphone units will automatically turn ON. {LED will light up Blue instead for 3 second if the earphone units are fully charged). After the charging case is opened, the LED Indicator of the charging case will light up in a designated color for 5 seconds depending on the battery power level of the charging case as shown in the table below.

• If the LED Indicator of the charging case does not light up after opening the charging case, the battery of the charging case might have been completely depleted. In such case, the earphone units will not turn ON when the case is opened. To turn ON the earphone units, tap the touch control panel once.

Turning OFF the Earphones

Touch and hold the touch control panel for about 3 seconds until two types of beep sound emanate, then release the hold and the power will switch OFF.

Returning the earphone units back to an adequately charged charging case and closing the charging case will automatically turn OFF the power of the earphone units. The LED Indicator light of the charging case will light up in a designated color for 5 seconds depending on the power level of the battery as shown in the table under P.4. After that, the LED Indicator will blink in Blue when the case is charging the earphone units.

• If the LED Indicator of the charging case does not light up after closing the charging case, the battery of the charging case might have been completely depleted. In such case, earphone units will not turn OFF automatically. Touch and hold the touch control panel for about 3 seconds until two types of beep sound emanate, then release the hold and the power will switch OFF.

Performing Device Pairing

To connect the earphones to your smartphone or other devices initially, it is necessary to perform device pairing. For devices which have been performed with the device pairing, a connection will automatically be established the next time the power is switched ON if they are in close distance.

Performing initial device pairing:

1. The power of the earphone units will automatically switch ON when the case is opened with the LED Indicator of the earphones lights up Red for 3 seconds. Then, they will automatically switch to the pairing mode with the LED Indicator on one of the earphones flashes between Blue and Red.
2. Switch ON the Bluetooth connection of the smartphone or other devices and select [ZE2000] which is shown under the pairable device list. When [ZE2000 Connected•1J appears on the display, device pairing is completed.

Unpairing current device and performing new device pairing with another device:

1. Disconnect the device to which it has already been paired or switch the Bluetooth connection OFF on the device to which it has already been paired.
2. Open the charging case and the LED Indicator on the earphones will light up in the designated color•2 according to its battery level for 3 seconds. Then, they will automatically switch to the pairing mode with the LED Indicator on one of the earphones flashes between Blue and Red.
3. Switch ON the Bluetooth connection of the smartphone or other devices and select [ZE2000] which is shown under the pairable device list. When [ZE2000 Connected•1J appears on the display, the new device pairing is completed.
4. The message display might differ depending on the connected device.
5. The LED Indicator on the earphone will light up in Blue if it is fully charged, and light up in Red when it is not.

Operation of Touch Control Panel

1. If you perform the touch control right after the start of a track, you will return to the previous track. If you perform the touch control in the middle of a track, you will return to the beginning of the current track. In order to return to the previous track while you are currently in the middle of a track, please perform the touch control twice in succession.
2. Depending on the device to which connected, this function may not be available.

Performing Factory Reset
When there is trouble achieving a successful pairing or an unexpected error has occurred, please perform the factory reset by the following procedures stated below. Once the factory reset is completed, please attempt another pairing operation.

1. Return the left and right earphone units back to an adequately charged charging case then touch and hold the touch control panel on both sides simultaneously for around 10 seconds until the LED Indicator of both sides light up in Purple.
2. After a certain amount of time, the earphones will automatically switch to the device pairing mode with the LED Indicator on one of the earphones flashes between Blue and Red. The factory reset has been completed.
3. The earphones are now in the factory default state with all previous pairing information with the smartphone or other devices deleted. Please remove the previous pairing record on the smartphone or other devices then perform device pairing again.

About the Ear Tips

When bass is hardly audible and high range sound jars the ear, there is a possibility that the sealing of ear tip is not appropriate. In order to enjoy music in accordance with the design of the earphone, it is important that the ear tip fits properly and there is a means of sealing the ear canal. In order to achieve the proper fit, please try the following methods:

• Instead of only using the L size attached by default, please try out all the sizes provided.
• Sometimes bigger ear tips might fit better for smaller ears.
• Some users might have different ear canal sizes for the left and right ears. To achieve perfect fitting on both ears, please also try pairing ear tips with different sizes for left and right.

Maintenance

Gently remove any build-up from the mesh filters with a cotton swab. Try to perform this regular maintenance on a weekly basis.

Safety Precautions

The following descriptions are provided to explain matters that must be observed in order to prevent harm to the user as well as other people, along with damages to property. Please be sure to observe this before using the product.

• Failure to observe the precautions indicated by this label will result in death or serious injury to the user.
• Failure to observe the precautions indicated by this label may result in death or serious injury to the user.
• Failure to observe the precautions indicated by this label may result in personal injury or property damage.

DANGER

Fire, electric shock, overheating, ignition, leakage, rupture, or accidental ingestion may cause death, blindness, or serious injury. Do not use, store, or leave the product in a humid or dusty place, or in a car where it will be exposed to high temperatures or places exposed to direct sunlight. Doing so may cause overheating, leakage, or rupture of the product. Do not use other than the supplied USB cable. Doing so may cause rupture, consequently resulting in fire, burn mark, or injury.

Troubleshooting

Warranty and After Service

The warranty for this product is valid for 1 year from the date of purchase. During the warranty period, we will repair the product based on the provisions below. The warranty is only valid in the country in which the product was purchased. Regarding questions pertaining to repairs, please contact the store you purchased the product from or contact us by visiting our “Contact” page.

1. During the warranty period, we will repair the product free of charge if the product failed even though it was used in accordance with the instructions in the user’s manual and the point of caution sections.
2. In the following cases, repairs to the product will be subject to a fee even during the warranty period:
   • Warranty card, original purchase receipt or other documentation showing the date of purchase are failed to be presented.
   • The product is identified to be modified, disassembled, or repaired by a third party or customer other than our company or our authorized organizations.
   • The earphones were subjected to a strong impact or were allowed to get wet. Product failure resulting from excessive use of force on the product.
   • Failure of the product or damage caused as a result of fire, earthquake, storm or flood damage, lightning strike or another natural disaster.
   • Repair of scratches on the surface of the housing or repair of the housing itself.

The warranty card located on the last page of this user manual is necessary in the event that the warranty is utilized. Please store the card along with a receipt or other documentation showing the date of purchase in a safe place.

Disposal Regulation

The rechargeable batteries built into the equipment are recyclable. During disposal, please follow the instructions from your local municipal government and do not attempt to disassemble the product.

Contacting Us

Please contact us by visiting our official “CONTACT” page by scanning the QR code below. https://final-inc.com/pages/lang-contact

Manufacturer:

final Inc.

There is a possibility of a change in the specification, so please scan this QR code below for the latest user’s manual. https://final-inc.com/pages/lang- download-ze2000

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>