Final Audio Design E4000 High Resolution Sound Isolating In-Ear Headphones Earphones User Guide

Final Audio Design E4000 High-Resolution Sound Isolating In-Ear

Headphones Earphones

Specifications

• BRAND: Final Audio Design
• EAR PLACEMENT: In-Ear
• COLOR: Black
• CONNECTIVITY TECHNOLOGY: Wired
• MODEL NAME: E4000
• PRODUCT DIMENSIONS: 0.47 x 0.98 x 0.39 inches
• ITEM WEIGHT: 0.634 ounces

Introduction

The low impedance of 15 ohm makes it ideal for mobile use. 6.4mm dynamic drivers with a narrow aperture. 1.2m of OFC cable and an MMCX connection. aluminum housing made of high rigidity. 18g in weight

HOW TO MAINTAIN

• After each use, wipe. …
• Keep your headphones to yourself. …
• Brush any dirt or earwax off the driving unit gently. …
• Remember to bring the jack. …
• Don’t put them in your pocket right away. …
• Don’t let the cables dangle. …
• Wires should not be twisted. …
• Avoid wrapping your cables tightly in loops.

HOW TO KNOW IF EARBUDS FIT

You can try carefully inserting your fingers, starting with the smallest, inside your ears. As soon as you achieve a sound seal and outside noise is muffled, move to the following finger on each hand. Next, try to match that finger’s size to one of the available ear tip sizes.

HOW TO PROTECT HEADPHONES WIRES

• Pull The Plug, Not The Cable. Coil The Cable Carefully. Don’t Let The Cord Dangle. Don’t Keep Them Plugged In.
• Make Your Wired Earphones Strong (And Beautiful), Get A Carry Case, and Don’t Sleep With Them On.

HOW TO REPAIR HEADPHONES WIRES

You’ll need an army knife, a lighter, and heat-shrinking tubing to patch and repair headphone wires and cables. You must strip the cable, remove the wire covering, reattach the wires, and apply heat-shrinking tape or electric tape to finish the repair.

HOW TO CLEAN EARPHONE PORTS

Lint could become lodged in the headphone jack of your Android or iPhone after placing the device in your pocket. The best way to delicately remove these textile fibers without causing any damage is with paperclips and tape.

Frequently Asked Questions

What about Final headphones?

While the E1000C provides respectable insight on a budget, the Final Audio E3000C is more tuned and sounds pleasant. Despite the fact that many smartphones, including inexpensive models, no longer support the 3.5mm headphone jack, people still choose to purchase expensive wired headphones and earbuds nowadays in order to enjoy a better listening experience.

After use, do headphones sound better?

What constitutes a “burn-in” of headphones? Many audiophiles contend that used headphones sound superior than those that are still in the box. Steve Guttenberg, a former projectionist at movie theatres, has also held positions as a record producer and a high-end audio salesperson.

How durable are HIFI headphones?

The average lifespan of a good pair of headphones is between five and ten years, though. Oh, yes! Even the priciest headphones in good condition last for many years. However, as your headphones get older, you’ll have to pay for the repairs.

How long does earbud burn-in last?

Generally speaking, burn-in is a painless and straightforward process. Simply keep the headphones on and play music continually. You need play for at least 40 to 50 hours. Pure tones like sin wave, sweeps, pink noise, or AM/FM static are frequently played by burn-in gurus.

Can excessive volume harm headphones?

After only 15 minutes of listening to music played through headphones at maximum volume, you could be permanently damaged by the 95 to 105 decibels you are exposed to.

Why do headphones’ wires break?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source

If I sleep with my headphones on, will they break?

If you wear headphones to bed, you run the risk of accidently turning up the volume. Long-term damage to your ears from loud music exposure is possible. The typical headphone’s maximum volume ranges from 85 to 110 dB.

Are headphones with exposed wires safe to use?

In most cases, exposed headphone wires are not harmful. Despite the fact that electricity does travel via earbud or headphone wiring, it does so at a very low voltage that is based on the impedance of the headphones.

What do the four headphones’ wires do?

Right audio channel signal on solid red cable. Right audio channel ground is red and copper twisted wire. Left audio channel signal on solid green cable. Ground for the left audio channel is a twisted green and copper wire.

Why do headphones have such small wires?

Because of the minimal power transmitted and other technological and financial considerations, headphones have extremely small wires. To produce a good decibel output (sound power), proper speakers push the magnetics inside of them with a lot of power.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>