Final Audio Design

Final Audio Design Adagio II Indigo Dynamic Driver Earphones

Specifications

• Product Dimensions: 48 x 0.5 x 1 inches
• Item Weight: 64 ounces
• Item model number: Adagio II Indigo
• Special Feature: Noise-isolation
• Connectivity Technology: Wired

What’s in the box?

• Final Audio Design Adagio II Earphones Indigo
• Original silicone ear tips (S/M/L)

Product Descriptions

The Adagio II delivers sound quickly and precisely despite its small size. Two years of intense research led to the creation of the Adagio series, a unique dynamic 8mm driver unit. The Adagio II is the series’ entry-level model from Final Audio Design.

Features

• Airflow inside the enclosure is optimized by the 8mm Dynamic Driver BAM mechanism.
• The housing’s design maximizes incredibly effective air flow.
• Connectivity Electronics: Wired

Note

Please take note that items with electrical plugs are made for use in the US. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are traveling. Before buying, kindly verify compatibility.

How to put on earbuds

The L and R indications located inside the housings can be used to identify the left and right housings. Holding the item, place it directly in the ear while looking for a secure fit. Play some music once you’ve found it to hear how the bass tones feel. If the bass is too weak, the earpieces are not properly fitting the audio canal. In that scenario, try a different sized ear piece or double-check that the position is steady. If the ear pad’s size is accurate but the fit isn’t quite right, cleaning it in water works well.

• The L (left) bush has a left and right identifying protuberance, allowing for tactile left and right discrimination in the dark.
• Adagio uses earpieces that are extremely sealed. Please be gentle when inserting and removing the earbuds from the audio canal. Failure to do so could cause stress to the wearer. For example, to the eardrum.
• A person’s left and right ears typically have different shapes. As a result, from left to right, the product is best positioned differently.

Frequently Asked Questions

What does the button in earbuds do?

The volume should rise gradually each time the volume-up button is pressed until the maximum volume is reached, if the headset supports volume control controls. The volume should rise gradually to its highest level if the volume- up button is pressed and held.

How should expensive headphones be cared for?

Here are some things to keep in mind:
• After each use, wipe.
• Do not allow anyone else to use your headphones.
• Brush any earwax or dirt off the driver unit gently.
• Don’t forget to bring the jack.
• Don’t put them in your pocket right away.
• Avoid dangling the wires.
• Keep your wiring neat and organized.
• Avoid wrapping your cables tightly in loops.

How do volume controls for headphones operate?

Between the mic signal and power inside the phone will be a resistor. A resistor will be installed in our remote volume control to alternate between the mic signal and GND. The voltage that results from this two-resistor resistive voltage divider depends on which button is being pressed.

Why do headphones lose their function so easily?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These situations could result in full disconnections between the drivers and the audio source or shorts in the electrical flow of the audio.

How should earbuds be used safely?

• Safe Listening Practices
• Turn down the volume. Turning down the level is the best approach to preserve your hearing while listening to music.
• Take advantage of noise-canceling headphones.
• Opt for headphones rather than earbuds.
• Abide by the 60/60 rule.
• Decide on a volume cap.

How are wired earphones maintained?

• Clean them up.
• After each use, wipe.
• Do not allow anyone else to use your headphones.
• Brush any earwax or dirt off the driver unit gently.
• Don’t forget to bring the jack.
• Don’t put them in your pocket right away.
• Avoid dangling the wires.
• Keep your wiring neat and organized.
• Avoid wrapping your cables tightly in loops.

How safe are wired headphones to use?

The radiation from both Bluetooth and corded headphones is harmless, according to the overwhelming body of scientific evidence.

How are earbuds damaged?

If they are wireless, you might be able to destroy them by using a tumble dryer, but it will void the warranty and kill the batteries. When the batteries fail, the tumble dryer may also sustain harm. You aren’t going far enough, in my opinion. Earbuds are a relatively inexpensive item.

How can I avoid having my wired earbuds break?

(8 Helpful Hints)
• Jack should remain unplugged.
• Purchase a headphone case.
• Employ the Proper Cable Length.
• Never pull the cable.
• Do not sit with your earbuds in.
• Your enemy is water.
• Overwhelmingly, Quality.
• Shrink wrap can be added as reinforcement.

Are wired headphones more musical?

In general, wired headphones typically offer higher sound quality than wireless ones. But with the most recent developments in wireless technology, wireless headphones’ sound quality has significantly increased.

Do these have a lot of volume or powerful bass?

I have not experienced any distortion while using these earbuds.

Can this be used on Android smartphones?

That would be determined by the phone. Any headset or in-ear monitor with a port that size, like mine, would work as an audio jack. Check your phone’s “sound jack” to make sure it has a 1/8, as most Android phones have.

Does it permit side sleeping?

More of our customers often favor the lower-profile M6 PRO variant over this model for side sleeping and wearing under helmets, depending on the user’s ear size and shape.

Can you weaken them?

These in-ear monitors’ cords are only meant to be worn up and over the ears. You might want to check at our Pinnacle series of audiophile earbuds, which can be worn up or down, if you’re not looking for in-ear monitors made for musicians.

Are these appropriate for non-musicians or casual listeners?

Yes, those who love great sound are not just musicians.

How many ohms are needed for them to operate?

In order to operate in-ear monitors, a device’s ohms requirement is not specified.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>