final FI-EVATW True Wireless Earphone User Manual

Product Diagram

True Wireless Earphone
FI-EVANS

※ Please choose and replace Ear Tip to suit your preference.

Accessory

Before Use

• Remove Insulating Sheet
  Remove the Insulating sheet from the backside of the earbuds.

• Battery Charge
  Insert USB type A connector of USB Charge Cable to USB AC charger or USB port of PC, and insert Type C USB connector to the USB port of Charging Case.
  Put the Ear Buds into the Charging case.
  While charging, the LED light constantly.
  When charging is completed, the LED will turn off.

• Power On/Power Off
  Put the Ear Buds into the Charging Case, and Ear Bud’s power OFF automatically. When picking up the Earbuds, power ON automatically.
  ※ When the Case battery is low, this function does not work.

Pairing

• Pairing
  To use Ear Buds the first time, you must pair Ear Bud with a mobile phone or player. Once your EarBuds is paired with other devices, they will remain paired and automatically recognize each other.

(First time to use]

1. Turn on the Bluetooth function of your mobile phone.
2. Turn on the power of both earbuds.
3. Select “EVATWO1” in the discovered device list of the phone.
4. Click “Pair” on the phone display.(Twice)

(Re-pairing or Pairing with a second mobile phone]

1. Turn on the Bluetooth function of your mobile phone.
2. Double click L or R Button.(White and Orange LED will quickly flash)
3. Select “EVATWO1-L” or “EVATWOIR” in the discovered device list of the phone.
4. Click “Pair” on the phone display.(Twice)

Charging Case

• Charge Case Battery
  Insert USB type A connector of USB Charge Cable to USB AC charger or USB port of PC, and insert Micro USB connector to the USB port of Charging Case. Depending on the battery level, the number of lit LEDs will change.

• Charge EarBuds
  Put the Ear Buds into the Charging case. While charging, the Orange LED light constantly. When charging is completed, the LED will turn off.

• Auto Power ON/OFF
  Put the Ear Buds into the Charging Case, Ear Bud power OFF automatically. When picking up the Earbuds power ON automatically.
  ※ When the Case battery is low, this function does not work.

Switching Master and Slave

The role of the Master unit / Slave unit, when the earbuds have been taken out from the charging case, the earbud with the larger battery remaining becomes the Master unit, and the one with the low battery level becomes the Slave unit.

For this reason, there is a possibility that the Master unit and Slave unit may be switched each time the earbuds are taken out from the charging case.

Also, by periodically putting the earbuds in and out of the charging case, you can efficiently use the batteries of the left and right earphones. So it will be able to operate for a longer time.

The master earbud is displayed as “Connected” on the Bluetooth screen of the connected device.

Meaning of LED

| Master| Slave
---|---|---
Power ON| White 1 Second
Power OFF| Orange 1 Second
No connection| White 1 time each 7Seconds
Connected| White 1 time each 7Seconds
Calling| White 1 time each 7Seconds
Incoming Call| Flashing White| White 1 time each 7Seconds
Talking| White 1 time each 3Seconds| White 1 time each 7Seconds
Pairing| Flashing White and Orange| White 1 time each 7Seconds
Reset mode| Flashing White continuously
Update mode| Orange 3times each 3Seconds

Button Operation

| | L| R
---|---|---|---
Power| ON| 1 Click| 1 Click
OFF| Long press 3seconds until beep twice| Long press 3seconds until beep twice
Music| Play| 1 Click
Pause| 1 Click
Next Track| –| Long press until a beep
Previous Track| Long press until a beep| –
Volume| Volume Up| 2Click| –
Volume Down| –| 2Click
Phone| Answer Call| 1 Click
Hang Up| 1 Click
Reject Call| 2Click
Pairing| Pairing Mode| 2Click L or R button with no connection
Reset| Reset| Long press the L and R buttons for 5seconds while charging
Voice Command| Start| 2Click without Music play (Master)
Update Mode>| Start| Long press over 1 2seconds

※ To cansel the update mode. power off by button or reset operation are required.

Frequently Asked Questions

Q)Suddenly I heard no sound from one earbud.
A)Please turn off the earbud and turn on it again.

Q) The white LED lamp of the earphone is continuously blinking.
A) Please try to reset for earbuds.

Q) Bluetooth connection has dropped.
A) Please delete rEVATWOU from the Bluetooth device list and pairing with your device again.

Q) The pairing between L and R earbud has dropped.
A) Turn off both earbuds and turn on them again.
A) Please try to reset for earbuds.

Q) When I place the earbud in the case, it won’t turn off itself.
When I get the earbud out from the case it won’t turn on.
A) While the case’s power is low, the automatic on-off function will not be active. Please turn on/off it manually.

Q) The case has run out of charges.
A) The case will discharge itself, please recharge the case regularly.

Q) I want to know about warranty and repair outside of Japan.
A) The warranty for this product is valid for 1 year from the day of purchase. During the warranty period, we will repair the product. The warranty is only valid in the country in which the product was purchased. Please contact the purchased store directly for the specific repair of the goods.

Specification

Product Specification

Driver| Dynamic type Φ6mm
Frequency Response| 20∼20,000Hz
Microphone| Omni-direction /CVC Noise Canceling
Bluetooth Specification| Version5.0/Class2/Multi-Pairing(8)
BluetoothProfile| A2DP, HFP, HSP, AVRCP
Bluetooth Codec| aptX, AAC,SBC
Battery| Earbuds: DC3.7V/50mAh Li-Po Battery Charger Case: DC3.7V/800mAh LiPo Battery
Continuous Playtime (Max)| 9.5hour(SBC/AAC), 6.5hour(aptX)
Continuous Talk time (Max)| 10hour
Charging Time (Min)| 2hour
Operation Temperature| 5∼50°C
Waterproof Level| IPX7
Accessories| Earpieces: S/M/L, Ear-loop, Charger Case, Charging USB cable, User’s guide

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>