gofanco HD14Ext1xN HDMI Over IP Extender 4K30 Kit User Guide

gofanco HD14Ext1xN HDMI Over IP Extender 4K30 Kit

Thank you for purchasing from gofanco. Our products aim to meet all your connectivity needs wherever you go. For optimum performance and safety, please read the instructions carefully and keep this User’s Guide for future reference. If you need more information about our products, please visit www.gofanco.com. For technical support, please email us at support@gofanco.com. For drivers/manuals download, please go to http://www.gofanco.com/downloads.

Important Safety Notices

Please read safety instructions carefully before installation and operation.

• Please pay close attention to all warnings and hints for this device
• Do not expose this unit to rain, heavy moisture, or liquid
• Do not repair the device or open the enclosure without professional guidance to avoid electric shocks. Doing so may void your warranty
• Keep the product in a well-ventilated location to avoid damage from overheating
• Shut off power and make sure environment is safe before installation
• Do not plug the HDMI cables and IR cables in/out when the device is in use to avoid cable damage. Make sure they are plugged into the correct ports
• Use the included DC5V power adapters only. Make sure the specification matches if using 3rd-party DC power adapters

Introduction

HDMI Over IP Extender 4K30 extends UHD 4K HDMI signals up to 120 meters using one economical CAT6/7 cable with IR support.
Package Contents

• HDMI Over IP Extender 4K30 (1 Transmitter & 1 Receiver)
• IR Blaster and IR Receiver cables (1 each)
• Power adapter (2pcs)
• User guide

Features

• Extends HDMI signals up to 120m (394ft) over a CAT6/7 cable
• Supports resolutions up to 4K@30Hz, HDCP 1.4 compliant
• Direct one-to-one connection or one-to-multiple over a dedicated Gigabit Ethernet switch or cascading switches. Additional receivers (HD14Ext1xN-RX) sold separately
• Supports IR pass-through to control the source device from a remote location
• Supports 2-channel Stereo audio
• Lightning/Surge/ESD protection

Installation Requirements

1. HDMI source device (DVD player, set top box, PC, etc.)
2. HDMI display device
3. HDMI cables (not included)
4. UTP/STP CAT6/7 cable following IEEE-T568B wiring standard

Product Layout

1. HDMI In: Connects to your HDMI source with an HDMI cable (cable not included)
2. IR Out: Connects to the IR Blaster cable
3. Reset: Press to reset the Transmitter
4. Power LED: On when the Transmitter is powered
5. Power Jack: Connects to the included power adapter
6. Data LED: Blinks during data transmission
7. Link LED: On when CAT cable is connected/linked properly to Transmitter’s and Receiver’s RJ45
8. RJ45 Out: Connects to the RJ45 of the Receiver using a CAT cable

1. HDMI Out: Connects to your HDMI display with an HDMI cable (cable not included)
2. IR In: Connects to the IR Receiver cable
3. Reset: Press to reset the Receiver
4. Power LED: On when the Receiver is powered
5. Power Jack: Connects to the included power adapter
6. Data LED: Blinks during data transmission
7. Link LED: On when CAT cable is connected/linked properly to Transmitter’s and Receiver’s RJ45
8. RJ45 In: Connects to the RJ45 of the Transmitter using a CAT cable

CAT Cable Wiring
We suggest both RJ45 connectors be wired identically using T568B wiring standard for the best performance and compatibility.

Hardware Installation

1. Power off all devices including your HDMI source and HDMI display(s).
2. Connect your HDMI source device to the Transmitter’s HDMI Input connector with an HDMI cable (HDMI cable not included).
3. Optional: Connect the IR Blaster cable to the Transmitter’s IR Output port. Face the eye towards your HDMI source device’s IR window. This connection is needed only if you need to control your HDMI source from the remote location.
4. Plug your CAT6/7 cable between the Transmitter’s RJ45 Output and Receiver’s RJ45 Input.
5. Connect your HDMI display to the Receiver’s HDMI Output connector with an HDMI cable (HDMI cable not included).
6. Optional: Connect the IR Receiver cable to the Receiver’s IR Input port. This connection is needed only if you need to control your HDMI source device from the remote location.
7. Plug the included power adapters into the Transmitter’s and Receiver’s power jacks, then plug both power adapters into a reliable power source.
8. Power on all connected devices.
9. The HDMI extender is ready for use.

Application

1-to-1 Connection

Direct connection between the TX and RX or through a Gigabit LAN via a Dedicated Gigabit Switch. If deployed within an existing network, create a VLAN to segregate our devices (TX and RX) from the rest of the network devices.
1-to-1 Direct Connection

1-to-1 LAN Connection

1-to-Many Connection

A Dedicated Gigabit Switch is recommended. If deployed within an existing network, create a VLAN to segregate our devices (TX and RX’s) from the rest of the network devices.

Notes:

• Many-to-Many Connection: A Smart Switch is required. Create a separate VLAN for each TX and its corresponding RX’s. Each VLAN can only have 1 TX.
• Additional RX’s, part# HD14Ext1xN-RX, are sold separately.

FAQ & Solutions

• Q: My display shows “Waiting for connection…”:
  A:
  

  • Please check if the power adapters of Transmitter (TX) and Receiver (RX) are connected and powered on.
  • Check the network cable (CAT6/7) is firmly connected between the TX and RX.

• Q: The remote display says, “Please check the TX input signal”:
  A:
  

  • Please make sure the HDMI source device is connected to the Transmitter (TX) unit and powered on.
  • Use different HDMI cables.
  • If it’s still not working, connect the HDMI source device to the TV directly to see if there’s a signal.

• Q: When playing 4K source the screen is blank without content:
  A: Check both TV and HDMI cable supports HDMI 1.4 specifications

• Q: The extender is not working properly:
  A:

  • Please check the cable lengths below:
  • HDMI cables: Up to 2m
  • Network cables (CAT6/7): Up to 120m
  • Press the reset button on the TX & RX and reconnect.

Specifications

Resolution

| 480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz,

4Kx2K@24/25/30Hz

Network Cable| Low resistance, oxygen free, 100% copper (CAT6/CAT6A/CAT7)
Transmission Distance| Up to 394ft (120m) @ 4K30Hz
IR Remote Control| Supports 20-60KHz wide frequency remote control
Operating Temperature| 32 to 140 F (0 to 60 C)
Power Adapter| 5VDC/2A (output)
Power Consumption| TX: 6W; RX: 4W
Dimensions| 4.2″ (L) x 3.7″ (W) x 0.9″ (H) (2pcs)
Weight| Tx: 0.37lb; Rx: 0.37lb
Color| Black

Disclaimer

The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted on the user’s guide. The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products.
We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.

References

• gofanco® | Professional & Residential AV/IT Solutions
• Downloads | gofanco

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>