impact PFSK-1824 PortaFrame Scrim Kit Instructions
- June 6, 2024
- Impact
Table of Contents
PFSK-1824/2436
PortaFrame
Scrim Kit
INSTRUCTIONS
Introduction
Thank you for choosing Impact.
The Impact PortaFrame Scrim Kit is a flexible way to shape and modify your continuous or strobe light source. Set up the foldable system in minutes, attaching it to standard 3/8-inch grip heads. Fabric scrims block, diffuse, or reduce the light, and give you creative control over the look of your shots. The scrim kit is compatible with other equipment available from Impact Studio Lighting. For more information, refer to the Recommended Products and Accessories section of this pamphlet.
Precautions ****
- The Impact PortaFrame Scrim Kit is designed for use in controlled environments. Bad weather and strong winds can be dangerous to the personnel and equipment. We cannot be held responsible for damage caused by misuse.
- Handle this product with care.
- Keep this product away from children.
- Use only parts provided by the manufacturer.
- Make sure everything is secure before proceeding.
- Make sure the items are intact and that there are no missing parts.
- All images are for illustrative purposes only.
Overview
- Folding locking frames
- Setting pin
- Pin notch
- 3/8 in. mounting pin
- Single net (green)
- Double net (red)
- 1-stop silk (gray)
- 2-stop silk (yellow)
- Light blocker (black)
- Frame sleeve
- Touch-fastener wrap
- Light-blocker finger
- Single-net finger
- Light-blocker dot
- Single-net dot
- Carrying case
Setup
1. Insert the folded frame’s 3/8-inch mounting pin into a standard grip head, and secure in place.
2. Raise one side of the frame, and seat the setting pin into the pin notch. Repeat for the opposite side.
3. Slip the scrim’s sleeve openings over the sides of the frame.
4. Secure the scrim to the frame with the touch-fastener wrap.
Specifications
Frames and scrims (H × W)| PFSK-1824: 18 × 24 in. (45.7 × 60.9 cm)
PFSK-2436: 24 × 36 in. (60.9 × 91.4 cm)
---|---
Dots| 6 in. (15.2 cm) diameter
Fingers| 4 × 14 in. (10.2 × 35.6 cm)
Case (L × H × D)| PFSK-1824: 33.4 × 9.8 × 3 in. (85 × 25 × 7.6 cm)
PFSK-2436: 44 × 11 x 3 in. (111.8 × 27.9 × 7.6 cm)
Mounting Pin| Frame: 3/8 in. (9.5 mm)
Dots and fingers: Max 0.3 in. (7.6 mm)
Min 0.2 in. (5.1 mm)
Weight| PFSK-1824: 11 lb. (4.9 kg)
PFSK-2436: 12.85 lb. (5.8 kg)
Recommended Products
- Impact KCP-200 Grip Head
- Impact KCP-200B Grip Head, Black
- Impact KCP-240 40 in. Grip Arm
- Impact KCP-240B 40 in. Grip Arm, Black
- Impact LSP-K10 Pro Light Stand
- Impact LS-CT40MK Turtle Base C-Stand Kit - 10.75 in. (chrome)
- Impact LS-CT40MBK Turtle Base C-Stand Kit - 10.75 in. (black)
Recommended Accessories
- Impact CC-106R Super Clamp with Ratchet Handle
- Impact SRP-118 Heavy-Duty Swivel Pin
- Impact ME-106 6 in. End Jaw Vise Grip
- Impact SBF-B-15 Saddle Sandbag, 15 lb., Black
- Impact GT10-212B Gaffer Tape, Black, 2 in. × 12 yd.
One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
Impact is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.
GG2