Halls Universal 128 SD, 128 DD, 148SD User Guide

: June 3, 2024
: Halls

Table of Contents

Universal 128 SD, 128 DD, 148SD
Safety Precautions
Maintenance
Overview
Accessories
Rear gable
Front gable
SD Door
Windows
Tougened glass
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Halls Universal
128 SD – 128 DD – 148SD May we congratulate you on your new greenhouse

Universal 128 SD, 128 DD, 148SD

Congratulations On Your Choice Of Greenhouse
Juliana Drivhuse A/S is a privately owned Danish company established in 1963. At Juliana Drivhuse we design, develop and manufacture our greenhouses based on principles of simplicity, aesthetics, functionality and quality. Over the years, Juliana Drivhuse has acquired several competing ompanies, so that today we offer three brands: Halls, Juliana and Gabriel Ash. Each brand contains products with unique designs and functionalities, but where the common
feature is a correlation between quality and price. All products are designed and manufactured to last for many years and form the framework for people and the good life, whether it is primarily for cultivation or as an oasis in the garden. On www.juliana.com you can read more about the company, the individual brands, and the wide range of accessories available for our greenhouses.
This Installation Manual
When assembling your new greenhouse, you need to follow these instructions step by step. You will find all bolts, nuts and fittings in a separate box.
NOTICE: These instructions might be designed for several sizes of the same greenhouse model.
All illustrations are marked with the following symbol: Seen from the inside: Seen from the outside:

If a component from a box is to be used at a later time in the assembly it is indicated by the following symbol:

Safety Precautions

Only carry out assembly in dry and calm weather.
Make sure you have an assistant to help you.
Always wear work gloves while glazing. Greenhouse glass has sharp edges, especially if it breaks.
Assistants, and especially children, must be warned that broken glass presents a safety hazard. Pick up all broken glass at once and remove it with care.
We recommend to use protective glasses while fixing spring wire clips.
Any ladders used must be placed on a level surface.

Location
The right location of the greenhouse is important to create the best growth conditions for plants and ensure the longevity of the greenhouse. The greenhouse must be placed in as sunny a position as possible and shielded from strong winds. As far as possible, avoid positioning the greenhouse under trees as the shade will encourage algae growth.
Likewise, fallen branches and leaves can damage the greenhouse and clog up the gutters.
We recommend that you locate the greenhouse on your favourite spot in your garden, especially if you want to use the greenhouse for purposes other than growing plants.
IMPORTANT: Before installing the greenhouse you must create a flat and true surface at least as big as the external dimensions of the greenhouse – this will ease the setup of the greenhouse.
Base
There is not a base included with this product.
However, one of our pre-fabricated bases can be purchased separately. If you purchase our prefabricated base anchor holes must be deep enough to extend below the frostline. Follow measurements shown on the following pages. All measurements are external measurements. If our pre-fabricated base is used this is attached to the greenhouse at every vertical glazing bar as shown on drawing A/B.
The best assembly order:

Ensure level ground.
Assemble base and ensure measurements as show on drawing. Make sure diagonal measurements are identical.
Mark holes and move the base.
Dig holes to extend below the frost line. Follow local recommendations.
Add a bend on the end of the ground anchors as shown on the drawing.
Place base with ground anchors above holes.
Make sure that the base is 100% level and at a straight angle. Make sure diagonal measurements are identical.
Fill up the holes with concrete.
Example: a hole with dimensions ø150 mm and 900mm in depth needs approximately 16 liters of concrete.
Make sure that the base is still 100% level and at a straight angle. Make sure diagonal measurements are still identical.

Upon recommended time of curing you may start assembling your greenhouse.
Locating The Greenhouse On A Solid Base
If the greenhouse is not going to be concreted down, it must be secured using suitable brackets. Brackets/ bolts are not part of this purchase. If a pre- fabricated base is used ground anchors should be cut off with a hacksaw at the same height as the base. Pre-fabricated base is designed for casting and therefore additional drilling and purchase of materials for this purpose is to be expected. Be aware that most insurance companies do not cover greenhouses that do not have a cast base.
Order of Assembly
Follow the assembly order as shown on the following pages.
Place components as shown on the drawing and then assemble the section in the order shown in the pictures. Do not tighten the nuts completely until the entire section is assembled. When all sections are complete the body of the greenhouse can be assembled.
NOTICE: In several places the assembly instruction shows that extra bolts must be inserted in the profiles. These are to be used for attaching other parts later in the process.
Doors and Windows Add grease on the screws for the door to ease assembly. Doors and vents should be glazed during the initial assembly.
IMPORTANT: Before glazing make sure that the gables and sides are level and straight, and that door(s) and window(s) work perfectly.
A greenhouse should never be left partially glazed.
Glazing
Fit the glazing strip (#411/#42) as shown on all roof/ side/gable glazing bars and corner/gable/door posts. Recommended order of glazing: roof – sides – gables.
For houses with horti glass:
Fit one glass at a time. Start from the bottom in each section.
Spring wire clips and glass-holders should be fitted as shown.
X = Spring wire clips > = Glass-holders For houses with toughened glass:
Fit one glass at a time and finish with capping/spring wire clips before continuing to next section.
NOTICE: If cappings are included in your product these should be fitted on both sides of the pane simultaneously so that the glass remains central.
Polycarbonate Installation
The illustrations show how to fit the sheets and strips.
If adjustment is necessary use a fine-tooth saw.
NOTICE: To avoid the growth of algae, do not allow the polycarbonate sheets to come into contact with the ground.
If desired, the sheets may be sealed against insects.
Seal the top using aluminium tape or silicone. The bottom should only be sealed with air-strip tape to allow condensation to escape.
Tools
The tools needed to assemble the greenhouse are shown on the following pages.
Tips and Tricks
See www.juliana.com for more tips on assembly of your greenhouse.

Maintenance

Grease the hinges of the doors, lock and
– if included – sliders approximately every 6 months.
Tighten bolts/nuts.
Clean the gutters from leaves etc.
Adjust windows if necessary.
Replace broken glass.
Clean the greenhouse before and after the growing season.

Winter and Storm Protection
If you anticipate snow and/or a storm we recommend the following:

Support the roof section.
Remove larger amounts of snow from the roof.
Take precautions to prevent snow falling from e.g. a tree or roof.
Remove the cylinders from the automatic window openers (accessory).
Secure door(s) and window(s) to prevent wind damage to the greenhouse.
Please note that not all insurance companies automatically cover greenhouses.

12-year Guarantee
A full description of the guarantee can be found on www.juliana.com.
Provided that the greenhouse is assembled and maintained according to the requirements, the greenhouse is covered by a 12-year guarantee. In case of missing parts/defects this must be reported immediately.
General maintenance of the greenhouse such as cleaning, lubrication, post- tensioning of nuts/ screws must be complied with, as this may affect the structural quality of the greenhouse and its resistance to wind and snow load.Please note that the guarantee does not cover;

Damage and functional problems due to lack of lubrication and maintenance.
Any paintwork is covered by a 2-year guarantee.
Nuance differences in colour may occur and there may be small marks on the profiles due to the painting process. This is not covered by the guarantee.
Glass, polycarbonate, freight, assembly, possible removal, possible consequential damage, labour costs, etc.
Parts damaged by external influences, such as: other building parts, climate impacts, vandalism, force majeure or other external conditions. E.g. remember to remove snow from the roof to avoid possible breakage due to excessive weight.
Wear parts (such as handles, wheels, sliders, cylinders and locking devices). Wear parts must be replaced on a regular basis depending on use and operation.
Product defects arising from incorrect/inappropriate use of parts.

NOTICE: a greenhouse is a single-skin, dry-build construction that is not 100% dense. Depending on weather conditions, leaks may occur at roofs, windows, doors and corners. Complaints
All our greenhouses are built according to the highest quality standards. However, should you experience any problems, please contact your dealer at once. When describing the defect, please state the greenhouse model and component number. Congratulations on your new greenhouse, which we hope will bring you great joy for many years to come.

Tips and Tricks

Overview

Halls Universal 128 SD, 128 DD, 148SD - Featured Image

Fitting

| #| 128 SD| 128 DD| 148 SD
---|---|---|---|---
| SCO| 2| 2| 2
| 931| 2| 2| 2
| 502| 2| 2| 2
| | 2| 2| 2
| 451| | | 4
| /50| 2| 2| 2
| ZS
3.20a| 16| 16| 16
| 12224| 2| | 2
| 479| 1| 2|
| 137| | I| 4
| X
653| 314| 3S4| 35
| 456| 96| |
| 131| 175| 175| 19 $
| 662| 206| 105| 22 $
| 697| 206| 105| 22 $
| 626 Unn| 33| 30| 33
| 142 2503mn| 2| 2| 2
| 1166| 21| | 24
| 428| 3| 2| 3
| 411.610| 2| 2| 2
| 333| 2| 2| 2
| 461| 0| 2| 0
| 703| 0| 1| 0
| 266| 0| 2| 0
| 460| 0| 1| 0

Overview

Halls Universal 128 SD, 128 DD, 148SD -Overview

Halls Universal 128 SD, 128 DD, 148SD -Overview 1

Accessories

Base
Steel-foundation

Halls Universal 128 SD, 128 DD, 148SD -Overview 1

2	X	Y	Z
1289,9m2	2560 mm	3804 mm	4594 mm
481,21 m	2560 mm	4426mm	5122 mm
#	mm	128
9,9m2	148

11,5m2
–| 2560| 2560| 2| 2
3804| 3804| 2|
4426| 4426| | 2
| 989| 345| 6| 6
| 994| M6x40| 4| 4
| 995| M6x10| 16| 16
| 996| M6| 20| 20
| 638| 4,2×16| 10| 10
| F40| | 3×6| 3×6

Halls Universal 128 SD, 128 DD, 148SD - Icon8