nVent 4020400CP Clevis Hanger for Copper Tube Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent 4020400CP Clevis Hanger for Copper Tube
FEATURES
Recommended for the suspension of stationary non-insulated copper tube lines Conforms with U.S. Federal Specification WW-H-171 (Type 12), Manufacturers Standardization Society (MSS) SP-58 (Type 1)
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Copper Electroplated
- Pipe Size: 4″
- Outer Diameter: 4 1/8″
- Rod Size: 1/2″
- A: 6 3/4″
- B: 4 1/16″
- C: 1 9/16″
- Static Load: 440 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>