beko HNT62340B Cooker Hood User Manual

beko HNT62340B Cooker Hood

Please read this user manual first!
Dear Valued Customer,
Thank you for preferring this Beko appliance. We hope that you get the best results from your appliance which has been manufactured with high quality and state-of-the-art technology. For this reason, please read this entire user manual and all other accompanying documents carefully before using the appliance and keep it as a reference for future use. If you handover the appliance to someone else, give the user manual as well. Follow the instructions by paying attention to all the information and warnings in the user manual. Remember that this user manual may also apply to other models. Differences between models are explicitly described in the manual.
Meanings of the Symbols
Following symbols are used in various sections of this user manual:

• Important information and useful hints about usage.
• WARNING: Warnings against dangerous situati-ons concerning the security of life and property.
• WARNING: Warning for danger of fire.
• WARNING: Warning for electric shock.

Important safety and environmental instructions

General safety
Important Safety Instructions Read Carefully And Keep For Future Reference This section contains safety instructions that will help protect from risk of fire, electric shock, exposure to leak microwave energy, personal in-jury or property damage. Failure to follow these instructions shall void any warranty.

• Beko products comply with the applicable safety standards; the-refore, in case of any damage on the appliance or power cable, it should be repaired or replaced by the dealer, service center or a specialist and authorized service alike to avoid any danger. Faulty or unqualified repair work may be dangerous and cause risk to the user.
• This appliance is intended to be used in household and similar applications such as:
• Staff kitchen areas in shops, offices and other working en-vironments;
• Farm houses
• By clients in hotels, and other residential type environ-ments;
• Bed and Breakfast type envi-ronments.
• Operate the appliance for its in-tended purpose only as descri-bed in this manual.
• The manufacturer cannot be held liable for damages resulting from improper installation or misuse of the product.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental ca-pabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not be allowed play with the appliance. Cleaning and user maintenance shall not be made by children without su-pervision.
• The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of your product must be at least 65 cm.
• If the instructions for installation for the gas hob specify a grea-ter distance, this has to be taken into account.
• Make sure that your mains power supply complies with the information supplied on the ra-ting plate of the appliance.
• Never use the appliance if the power cable or the appliance it-self is damaged.
• Prevent damage to the power cable by not squeezing, bending, or rubbing it on sharp edges. Keep the power cable away from hot surfaces and naked flame.
• Use the appliance with a groun-ded outlet only.
• WARNING: Do not connect the appliance to the mains until the installation is fully complete.
• Place the appliance in a way so that the plug is always accessible.
• Do not touch the lamps if they have operated for a long time. They can burn your hands since they will be hot.
• Follow the regulations set out by competent authorities on disc-harge of the exhaust air (this warning is not applicable for use without flue).
• Operate your appliance after put-ting a pot, pan etc. on the hob. Otherwise, high heat may cause deformation in some parts of your product.
• Turn off the hob before taking the pot, pan etc. from it.
• Do not leave hot oil on the hob. Pans with hot oil may cause self combustion.
• Pay attention to your curtains and covers since oil may catch fire while cooking food such as fries.
• Grease filter must be cleaned at least monthly. Carbon filter must be replaced at least every 3 months.
• Product shall be cleaned ac-cordance with user manual. If cleaning was not carried out in accordance with user manual, there may be fire risk.
• Do not use non-fire-resistant filtering materials instead of the current filter.
• Only use the original parts or parts recommended by the ma-nufacturer.
• Do not operate the product wit-hout the filter and do not remove the filters while the product is running.
• In the event of be started any flame, de-energize your product and cooking appliances.
• In the event of be started any flame, cover the flame and never use water to extinguish.
• Unplug the appliance before each cleaning and when the appliance is not in use.
• The negative pressure in the envi-ronment should not exceed 4 Pa (4×10 bar) while the hood for elect-ric hob and appliances running on another type of energy but electricity operate simultaneously.
• In the environment where the appliance is being used, the ex-haust of devices running on fuel oil or gas, such as room heater must be absolutely isolated or device must be hermetical type.
• When connecting the flue, use pipes with a diameter of 120 or 150 mm. Pipe connection must be as short as possible and have as few elbows as possible.
• Danger of choking! Keep all the packaging materials away from children.

CAUTION: Accessible parts may become hot when used with coo-king appliances.

• The product outlet must not be connected to air channels that include other smoke.
• The ventilation in the room may be insufficient when the hood for electric hob is used simultaneo-usly with the devices operating on gas or other fuels (this may not apply to appliances that only discharge the air back into the room).
• Objects placed on the product may fall. Do not place any ob-jects on the product.
• Do not flambe under the your product.

WARNING: Before installing the Hood, remove the protective films.

• Never leave high naked flames under the hood when it is in ope-ration
• Deep fat fryers must be conti-nuously monitored during use: overheated oil can burst into fla-mes.

Compliance with the WEEE Directive and Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equip-ment (WEEE).

This symbol indicates that this product shall not be disposed with other hou- sehold wastes at the end of its service life. Used device must be returned to offical collection point for recycling of electrical and electronic devices. To find these col-lection systems please contact to your local autho-rities or retailer where the product was puchased. Each household performs important role in reco-vering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS
Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package Information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packa-ging material collection points designated by the local authorities.

General appearance

Overview

1. Slinder panel
2. Control panel
3. Grease filter
4. Lighting

Using the appliance

Controlling the appliance

KEY| FUNCTION
A : Light On / Off| You can illuminate the cooking area by pressing this key.
B : 1. Stage Button| You can start your hood at spe- ed level 1 by pressing this key. When you press this key again to switch off the appliance, spe- ed level indication on the display disappears.
C : 2. Stage Button| You can start your hood at spe- ed level 2 by pressing this key. When you press this key again to switch off the appliance, spe- ed level indication on the display disappears.
D : 3. Stage Button| You can start your hood at spe- ed level 3 by pressing this key. When you press this key again to switch off the appliance, spe- ed level indication on the display disappears.

Energy efficient usage

• When using your appliance, adjust the speed settings according to vapour and odour inten-sity, in order to save energy.
  Use low speeds (1-2) under normal conditions, and high speed (3) for intense odour and vapour.

• The lamps on the hood are placed for illuminat-ing the cooking area.

• Using them for environmental lighting shall cause unnecessary energy expenditure and in-sufficient lighting.

• Operating the hood

• Your appliance contains a motor that has various speeds.

• For better performance, we recommend using low speeds under normal conditions and high speeds in cases of strong odours and intense vapour.

• You can start your appliance by pressing on the desired speed setting button. (B, C, D)

• You may illuminate the cooking area by pressing the lamp. (A)

Automatic stop

• Your appliance has Automatic Stop feature, enab-ling it to ventilate for a bit more and remove the unwanted odours and vapour inside the environ-ment and turn off automatically after the cooking is done. To enable Automatic Stop feature, press the any speed stage button (B, C, D) on the control panel for longer than 2 seconds; the 15-minute ti-mer function shall be activated. When the automa-tic stop feature is active, pressing the same speed button shall disable the automatic stop function and the appliance’s motor shall stop. This featu-re is disables when you switch between different speed stages. If you want the appliance to stop automatically, you need to enable the automatic stop feature again.

Replacement of Lamp

Make the electrical connections of the appliance. Your appliance uses 3W spot LED lamp. For rep-lacing the lamps, push downwards on the holder from its behind, turn it counter-clockwise, and take it out downwards. Apply the above operation in reverse to install new lamps.

Bulb|
---|---
Bulb Power| 3 W
Holder / Socket| GZ 10
Bulb Voltage| 220 – 240 V
Size| 53 x 50 mm
ILCOS Code| DR/F3-220-240-GZ10-50-53
Luminous flux| 260 lm
Correlated colo- ur temperature| 3000 K

This product contains a light source of energy ef-ficiency class “F”.
Operation with chimney connection

• Vapour is extracted through the flue duct, which is fastened to the connection head on the hood.
• The diameter of the flue duct must be the same as the connection ring. In horizontal settings, the pipe has to have a slight upward slope (around 10º) so that the air can exit the room easily.

Operation without chimney connection

• Air is filtered through the car-bon filter and recirculated in the room. Carbon filter is used when it is impossible to use a flue in the house.
• In flueless use, remove the flaps inside the flue adapter.

Cleaning and maintenance

Before cleaning and maintenance, unplug the product or turn off the switch.

Cleaning of grease filter
A grease filter is used to retain the oil particles in the air. The grease filter may change color after repeated cleaning. This is normal, and you do not have to replace your filters.

• Push the grease filter lock forward.
• Then pull it slightly down and pull it out. Other-wise, you may bend the filter. Wash and rinse grease filter with liquid detergent and replace grease filter to their seats by carrying out the steps specified above in reverse order. These grease filter are used to retain the oil particles in the air.
• You may also wash the grease filter in the dishwasher.
• CAUTION: In case of normal use, clean your grease filter once in a month.

Replacement of Carbon Filters
Odour-removing filters contain charcoal (Active car-bon). Grease filter must be installed in the product, regardless of whether or not carbon filters are used.

• Remove the grease filter.
• To remove the carbon filter, remove the car-bon filter from its housing by rotating it coun-ter-clockwise from the tab.
• Install the new carbon filter.
• Install the grease filter.

CAUTION

• Carbon filter shall never be washed.
• Replace carbon filters once every 3 months.
• You can obtain the carbon filter from the authorized services.

Installation of appliance

WARNING: Before starting the installation, read the safety information on user manual.

WARNING: Failure to install screws and stabilizers in accordance with these instructions may result in electric shock.

For the installation of the hood, please contact the nearest Authorized Service.
It is the customer’s responsibility to prepare the location and electrical installation of the hood.

Position of the appliance

• Distance between the cooker and the cooker hood must be considered prior to assembly. This distance should be 65 cm.
• Distance must be measured from the surface of grate for gas cookers,
• from surface of glass for electric cookers.
• Boring the hanger holes

Drill the holes indicated

• on the installation templa-te with A, B, C, D using a Ø4 mm drill bit. (Fig. 1)
• Use the supplied 4 x 40 screws to fix the product to the cupboard at A, B, C, D holes. When the sli-der set moves, the front panel should not scrape off the cupboard door. (Fig. 2)
• Place the provided plastic flue at the flue output on the product. Rotate the plastic flue in clockwise direction. (Fig. 3)
• Install the flexible aluminum flue on the plastic flue. Place the other tip of the flue into the flue hole. (Fig. 4)
• WARNING: As the bends and el-bows at the aluminium flue will cause decrease in the air suction power, using these must be avoided as much as possible.

Functions of the hood
The hood can be operated in kitchens with and without flue.
Usage with flue
In usage with flue connection, hood must be con-nected to a flue that will discharge the air outside. Ensure that the pipework connected to flue follows the shortest possible route to obtain best effici-ency from your hood. The product is manufactured at the factory for usage with flue.

WARNING: The hood outlet must not be connected to air channels that include other smoke.

Troubleshooting

restore it.
Appliance is not working.| Check the electrical connection.| Mains voltage shall be between 220 and 240 V.
Appliance is not working.| Check the electrical connection.| Check if other appliance in your kitchen operate.
Illumination light does not operate.| Check the electrical connection.| Mains voltage shall be between 220 and 240 V.
Illumination light does not operate.| Inspect the lamp switch.| Lamp switch shall be at “on” position.
Illumination light does not operate.| Inspect the lamps.| The lamps of the appliance shall illuminate.
Air inlet of the appliance is inadequate.| Inspect the grease filter.| Under normal operating conditions, grease filter shall be cleaned at least once in a month.
Air inlet of the appliance is inadequate.| Check the air discharge chimney.| The air discharge chimney shall be at “on” po- sition.
Air inlet of the appliance is inadequate.| Inspect the carbon filter.| The filters of the appliances with carbon filters shall be replaced once in every 3 months under normal conditions.

• www.beko.com

Documents / Resources

| beko HNT62340B Cooker Hood [pdf] User Manual
HNT62340B, Cooker Hood, HNT62340B Cooker Hood, Hood
---|---

References

• Beko Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>