GUIDE 765 Work Glove Instruction Manual
- June 3, 2024
- Guide
Table of Contents
GUIDE 765 Work Glove
CE category 2, protection when there is a medium risk of serious injury.
Usage
The gloves shall not be worn when there is a risk of entanglement with moving parts of machines
This glove is shorter than the standard length according to EN420
In order to maximize the flexibility of use at assembly work and lighter work
tasks.
We recommend that the gloves are tested and checked for damage before use.
It is the employer’s responsibility with the user to analyze if each glove
protects against any possible risks in any given work situation.
Basic demands
All GUIDE gloves correspond to the PPE regulation (EU) 2016/425 and the standard EN 420:2003+A1:2009.
Declaration of Conformity
Declaration of Conformity for this product can be found at our website: guidegloves.com/doc.
The gloves are designed to protect against the following risks:
EN 388:2016 – Protective gloves against mechanical risks
The characters next to the pictogram, four numbers, and one or two letters,
indicate the glove’s protection level. The higher value the better result.
Example 1234AB.
- Abrasion resistance: performance level 0 to 4
- Cut protection, coup test: performance level 1 to 5.
- Tear resistance: performance level 1 to 4.
- Puncture resistance: performance level 1 to 4.
- Cut protection, TDM test EN ISO 13997:1999, performance level A to F. This test shall be performed if the material dulls the blade during the coup test. The letter becomes the reference performance result.
- Impact protection: is specified by a P
For gloves with two or more layers, the overall classification does not necessarily reflect the performance of the outermost layer.
- If X = Test not assessed
Testing is carried out on the palm of the glove unless other is specified. If not specified the glove doesn´t contain any known substances that can cause allergic reactions.
Glove marking
Test results for each model are marked on the glove and/or on its packaging, in our catalogue, and on our web pages.
Storage
Store the gloves in a dark, cool, and dry place in their original packaging. The mechanical properties of the glove will not be affected when stored properly. The shelf life cannot be determined and is dependent on the intended use and storage conditions.
Disposal
Dispose of the used gloves in accordance with the requirements of each country and/or region.
Cleaning/washing
Achieved test results are guaranteed for new and unwashed gloves. The effect of washing on the gloves’ protective properties has not been tested unless specified.
Washing instructions
Follow the specified washing instructions. If no washing instructions are specified, rinse with water and air dry. Website: Further information can be obtained at www.guidegloves.com.
References
- Declarations of Conformity | Guide Gloves
- 30 years experience of Work gloves & Safety gloves | Guide Gloves