COLBOR PL8R RGB LED Light User Manual

COLBOR PL8R RGB LED Light

Thank you for ch00sing COLBOR product. Please read this manual carefully before use and tollow all instructions mentioned herein.

Caring For Your COLBOR Product

Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage
Use only a soft and dry cloth for cleaning the product.
Malfuction may be caused by dropping. impact of external torce.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Please remove the USB charging cable when the battery is fully charged.
The product might get hot during use, which is normnal. Please allow certain space for heat-sink when using it.
If you do not use the product for a long time, it might not be able to turn on instantly due to dead battery. Please charge the product and it can resume to Work. Please charge the product every 3 months regularly.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human enrors.

Operation Instructions

1. Power & Mode Switch Button
   Long press for 3 seconds to turn on/off the product.
   When the product is on, short presS to switch among 3 light modes, CCI,HSI and EFF mode.

2. Dial
   Long press down to make a wireless Connection.
   Roll upwards to increase value, and downwards to decrease value.

3. Brightness Control
   For 0%-100% brightness adjustment.

4. Type-C DC Input
   Used to charge this product and Supports 5V 2A input at maximum.
   Charging time varies depending on the power ot the charger.

5. Type-A DC Output
   Supports maximum output 5V 2A tO power other devices. External power Supply will affect the runtime of the product itself.
   Please prepare the corresponding charging cable by yourself to charge
   other devices. The power management of ditferent devices will control the
   Output voltage and current.

6. 1/4″ Screw Hole

7. Cold Shoe

8. Display Screen

Wireless Connection:

1. Download COLBOR Studio APP from Our website
2. Long press down the Dial on the light to make a wireless connection
   With APP

Interface Introduction
CCT Mode

1. Color Temperature Control (2500K-9000K):
   Roll the Dial upwards or downwards

2. Brightness Control (0%-100%):
   Roll the Brightness Control upwards or downwards

HSI Mode

1. OIn CCT mode, press the Mode Switch Button once to enter HSI mode.

2. Option Adjust:
   Short press down the Dial to choose the option to be adjusted, hue or saturation

3. Roll the Dial upwards to increase the value, and downwards to decrease the value Hue value

4. Brightness Control (0%-100%):
   Roll the Brightness Control upwards or downwards

EFF Mode

1. In HSI mode, press the Mode Switch Button once to enter EFF mode.

2. Special effect switch
   Short press down the Dial.
   Special Effect: Fire> Fireworks CCI ChasePulsing Cop
   CarTV>Party Explosion Faulty Bulb Welding Strobe
   Lightning SOS

3. Frequency Control:
   Rll the Dial upwards or downwards
   (Note: In SOS effect, frequency control is unavailable.)

4. Brightness Control (0%-100%):
   Holl the Brightness Control upwards or downwards.

Specifications

Package List

WARRANTY

Warranty Period
Thank you for purchasing COLBOR products.

1. Customers are entitled to free replacement or repair service in case of quality detect(s) Tound in the product under normal use within 30 days upon receipt OT the product.
2. Original COLBOR products are entitled to 12-month limited warranty service.
   The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
   Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

1. Faults resulted from inappropriate use of a product without following its operation specihcation
2. Artificial damage, e.g. crash, squeeze, scratch, or soaking
3. Modihcations to a product by its user or a third party without prior written consent of COLBOR, e.g. replacement of element or circuit, label alteration
4. The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certiicate is altered or torn off
5. All consumable accessory attached to a product, like cable, wind muff, battery
6. Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

1. If failure or any problem OCCurs to your product after purchase, please contact a local agent for assistance, or you can always contact COLBOR s customer service through email.

2. Please retain your sales receipt and warranty certificate as proof of purchase.
   If any of these documentS IS missing, only sales return or chargeable service Will be provided.

3. If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged.

Please register your warranty. Meanwhile, you are welcomed to contact us via Email.
USER INFORMATION| Customer Name
Phone Number·
Email
Address
SALES INFORMATION| Sales Date:
Model
Product Code:
Dealer
REPAIR RECORD| Service Date·
Technician:
Issue·

Guangzhou Zhiying Technology Co., Ltd
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
Support@colborlight.com
www.colborlight.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>