COLBOR W60R Video Light User Manual
- June 1, 2024
- COLBOR
Table of Contents
COLBOR W60R Video Light User Manual
Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product
- Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
- The product is not waterproof.
- Do not leave the product unattended while in use. Keep out of reach of children.
- Do not handle with wet hands. Do not touch the hot COB surface.
- Please do not block the ventilation and do not look at the light directly when it is on.
- Do not attempt to disassemble or modify the product. Doing so voids warranty.
- Please have the product checked or repaired by authorized technicians if any malfunctions happened.
- Disconnect from the power supply when it is not in use.
- Do not cover, inverted COB and radiator for high temperature, do not cover, inverted, do not touch the lamp holder and radiator vent with your hands when the product in use.
- Do not use any power adapter of other products to avoid the lamp malfunction.
- Malfunction may be caused by dropping, impact of external force.
- Failure to follow all the instructions may result in mechanics damage.
- Our company reserves the right of final interpretation of the product.
- Product design and specifications are subject to change without prior notice.
Note：
- Please use the included power adapter to avoid damage.
- When powering via the COLBOR POWER GRIP, use the D-Tap to DC cable to connect the D-Tap port on the battery and the DC port on the light.
Please do not use the Type-C port on the battery for powering.
Product Instructions
① Power Button
② Wireless Control Setting Button
③ Wheel
④ Knob
⑤ OLED Screen
⑥ Air Inlet
⑦ NFC Detection Area
⑧ COLBOR Mount Lock
⑨ COB Lamp Beads
⑩ COLBOR Mount
⑪ 1/4’ Hole Screw
⑫ Battery Contacts
⑬ Type-C Port
⑭ DC Port
Light Installation
1. Removal of COB protection cover
Hold the COB cover with the COLBOR Mount tenon and rotate it as the direction of the arrow.
- Note: Be sure to remove cob protective cover and cob protective film before use.
2. Installation and removal of reflector
Installation of reflector: Align the reflector with the groove around the lamp
head and clip it in, turn the reflector as the direction of the arrow, and the
reflector installation will be completed after the top rod rebounds.
Removal of reflector: Follow the instructions of “Removal of COB protection
cover”.
3. Power Connection
(1) Power with power adapter
Connect the power adapter, align the DC power jack of the lamp body, and then
power on through the cable after stable.
Do not suspend the power adapter in the air. Use wire rings to hang it on the
lamp stand.
(2) Power with COLBOR Power Grip
Secure the battery handle with the light body’s 1/4” screw hole at the top and
connect via the D-Tap to DC cable for powering.
Operation Instructions
-
Power On/Off
Power On：Connect to the power source then long press the power button.
Power Off：Long-press the power button to turn off. -
Wireless Connection
Short press the remote control button to switch between 2.4GHz (CTRL1 remote) and APP (COLBOR Studio APP) control modes.
Long-press the button to start pairing. -
CCT/HSI Mode Switching
Long press the knob to switch the menu between CCT/HSI. -
Brightness Adjustment
Roll the wheel for adjustment. Short press the wheel side to select preset brightness (0%, 25%, 50%, 75%, 100%). -
Color Temperature Adjustment
Switch to CCT Mode, rotate the knob for color temperature adjustment.
Short press the knob to select the preset color temperature (2700K, 3200K, 4300K, 5600K, 6500K). -
HUE/SAT Adjustment
Switch to HSI Mode, short press the knob to select HUE/SAT options, rotate it for adjustment. -
EFF Control/Fan Mode Control
Connect to the APP for Fan settings and EFF settings.
6. Status Icon Description
Specifications
Packing List
*Power adapters may vary according to sales region.
Form 1
Illumination
*The data is given from testing in a laboratory.
WARRANTY
Warranty Period
Thank you for purchasing COLBOR products.
1.Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days upon
receipt of the product.
2.Original COLBOR products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the first end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Warranty Exclusions and Limitations
1.Faults resulted from inappropriate use of a product without following its
operation specification
2.Artificial damage, e.g. crash, squeeze, scratch, soaking, exposing to rain
or damp
3.Modifications to a product by its user or a third party without prior
written consent of COLBOR, e.g. replacement of element or circuit, label
alteration
4.The code on product is inconsistent with that of warranty certificate, or
the code on the product or warranty certificate is altered or torn off
5.All consumable accessory attached to a product, like cable, cover
6.Faults as a result of force majeure, such as fire, flood, lightning, etc.
Warranty Claim Procedure
1.If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact COLBOR’s
customer service through email.
2.Please retain your sales receipt and warranty certificate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
3.If the COLBOR product is out of the warranty coverage, the service and the
parts cost will be charged.
Guangzhou Zhiying Technology Co., Ltd
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan
District, Guangzhou, China, 510000
[email protected]
www.colborlight.com