COLBOR W60 Video Light User Manual

COLBOR W60 Video Light

Product Information

Specifications:

• Brand: COLBOR
• Model: W60 Video Light
• Features: Wireless control, brightness adjustment, color temperature control
• Power Source: Power adapter or battery (COLBOR Power Grip)
• Not Waterproof

Product Usage Instructions

Light Installation:

1. Removal of COB Protection Cover: Hold the COB cover with the COLBOR Mount tenon and rotate it as the direction of the arrow.
2. Installation and Removal of Reflector: Align the reflector with the groove around the lamp head and clip it in. Turn the reflector as the direction of the arrow. Removal of reflector follows the same steps as the COB protection cover removal.
3. Power Connection:
4. Power with Power Adapter: Connect the power adapter to the DC power jack of the lamp body and then power on through the cable after stable.
5. Power with COLBOR Power Grip: Secure the battery handle with the light body’s 1/4 screw hole at the top and connect via the D-Tap to DC cable for powering.

Operation Instructions:

1. Power On/Off: Press and hold the power button to turn the light on. Long-press the power button to turn it off.
2. Wireless Connection: Short press the remote control button to switch between 2.4GHz and APP control modes. Long-press the button to start pairing.

Frequently Asked Questions (FAQ)

• Is the COLBOR W60 Video Light waterproof?
  No, the product is not waterproof. Keep it away from liquids to prevent damage.

• Can I use a different power adapter with this light?
  It is recommended to use the included power adapter to avoid any malfunctions. Using power adapters from other products may cause issues with the lamp.

Caring For Your COLBOR Product

• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• The product is not waterproof.
• Do not leave the product unattended while in use. Keep out of reach of children.
• Do not handle with wet hands. Do not touch the hot COB surface.
• Please do not block the ventilation and do not look at the light directly when it is on.
• Do not attempt to disassemble or modify the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
• Disconnect from the power supply when it is not in use.
• Do not cover, inverted COB and radiator for high temperature, do not cover, inverted, do not touch the lamp holder and radiator vent with your hands when the product in use.
• Do not use any power adapter of other products to avoid the lamp malfunction.
• Malfunction may be caused by dropping, impact of external force.
• Failure to follow all the instructions may result in mechanics damage.
• Our company reserves the right of final interpretation of the product.
• Product design and specifications are subject to change without prior notice.

Note：

• Please use the included power adapter to avoid damage.
• When powering via the COLBOR POWER GRIP, use the D-Tap to DC cable to connect the D-Tap port on the battery and the DC port on the light. Please do not use the Type-C port on the battery for powering.

Product Instructions

1. Power Button
2. Wireless Control Setting Button
3. Brightness Control Wheel
4. Color Temperature Control Knob
5. OLED Screen
6. Air Inlet
7. NFC Detection Area
8. COLBOR Mount Lock
9. COB Lamp Beads
10. COLBOR Mount
11. 1/4’ Hole Screw
12. Battery Contacts
13. Type-C Port
14. DC Port

Light Installation

Removal of COB protection cover
Hold the COB cover with the COLBOR Mount tenon and rotate it as the direction of the arrow.
Note: Be sure to remove cob protective cover and cob protective film before use.

Installation and removal of reflector

• Installation of reflector: Align the reflector with the groove around the lamp head and clip it in, turn the reflector as the direction of the arrow, and the reflector installation will be completed after the top rod rebounds.
• Removal of reflector: Follow the instructions of “Removal of COB protection cover”.

Power Connection

1. Power with power adapter Connect the power adapter, align the DC power jack of the lamp body, and then power on through the cable after stable. Do not suspend the power adapter in the air. Use wire rings to hang it on the lamp stand.

2. Power with COLBOR Power Grip Secure the battery handle with the light body’s 1/4” screw hole at the top and connect via the D-Tap to DC cable for powering.

Operation Instructions

1. Power On/Off
   Power On：Connect to the power source then long press the power button. Power Off：Long-press the power button to turn off.

2. Wireless Connection

   • Short press the remote control button to switch between 2.4GHz (CTRL1 remote) and APP (COLBOR Studio APP) control modes.
   • Long-press the button to start pairing.

3. Brightness Adjustment
   Roll the brightness adjustment wheel for adjustment. Short press the wheel side to select preset brightness(0%, 25%, 50%, 75%, 100%).

4. Color Temperature Adjustment

   • Rotate the color temperature control knob for color temperature adjustment.
   • Short press the knob to select preset color temperature(2700K, 3200K, 4300K, 5600K, 6500K).

5. EFF Control/Fan Mode Control
   Connect to the APP for Fan settings and EFF settings.

6. **Status Icon Description

**

Specifications

Packing List

Form 1

Illumination

CCT

| |

1m

|

3m

|

5m

---|---|---|---|---
2700K| Light Base| 2350| 334| 174
Reflector| 3830| 505| 249
3200K| Light Base| 2490| 372| 185
Reflector| 4080| 536| 260
4300K| Light Base| 2730| 406| 202
Reflector| 4480| 587| 286
5600K| Light Base| 2890| 432| 212
Reflector| 4770| 624| 309
6500K| Light Base| 2980| 445| 218
Reflector| 4940| 644| 315

The data is given from testing in a laboratory.

WARRANTY

Warranty Period
Thank you for purchasing COLBOR products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
2. Original COLBOR products are entitled to 12-month limited warranty service.
   The warranty period begins on the date of purchase of brand new, unused products by the first end-user.
   Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

1. Faults resulted from inappropriate use of a product without following its operation specification
2. Artificial damage, e.g. crash, squeeze, scratch, soaking, exposing to rain or damp
3. Modifications to a product by its user or a third party without prior written consent of COLBOR, e.g. replacement of element or circuit, label alteration
4. The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
5. All consumable accessory attached to a product, like cable, cover
6. Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

1. If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact COLBOR’s customer service through email.
2. Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
3. If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged.

ABOUT COMPANY

• Guangzhou Zhiying Technology Co., LtdRoom 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District, Guangzhou, China, 510000
• support@colborlight.com
• www.colborlight.com

References

• Best Video Lights | Lights for Video Studio | COLBOR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>