MOB MO8925 Children’s Kite User Manual
- June 3, 2024
- MOB
Table of Contents
MOB MO8925 Children’s Kite
How to assemble
- Unfold the kite and lay it on a flat surface with the back of the kite facing up.
- Install the two short Cross Spars with one end of each Cross Spar inserted into the Center Connector and the other end into the Corner Connector.
- Slide the Center Connector along the center spine so that the Cross Spars form a straight line.
- Tie the flying line onto the Plastic Ring that is attached to the front of the kite.
- Unwrap the Tail Ribbon. You are now ready to fly your kite.
Flying Tips
- Kites fly best in wide open spaces. Avoid flying in areas near buildings and trees.
- To launch, stand with the wind at your back.
- Hold the kite with the top up in one hand while securely holding the string winder in the other.
- When you feel the pressure of the wind against the kite, let go. As the kite rises, slowly let out the string.
Warning
- Not suitable for children under 3 years. Long cord. Strangulation hazard.
- Do not use near overhead power lines or during thunderstorms.
- Please retain the name and address for future reference.
- Kite flying for children should be always undertaken with parental supervision
Hereby, MOB declares that item MO6459 is in Compliance with the essential requirements and other relevant conditions of Directive 2009/48/EC. The full text of the EU declaration of conformity is available at the following internet address: www.momanual.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>