MOB MO9062 Round Wireless Speaker User Manual
- June 3, 2024
- MOB
Table of Contents
MOB MO9062 Round Wireless Speaker
Wireless speaker with FM radio
Important: Read these instructions before using the product.
Warning
- Keep speaker away from water and moisture or any heat source.
- Permanent hearing loss may occur if speaker is used at high volume. Set the volume to a safe level.
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
FM Scan Radio
- With the provided cable, insert Mini USB plug into speaker, the cable will act as the antenna, It is not necessary to connect the cable anywhere else.
- Turn the power switch to the ‘’ON’’ position.
- Press MODE button to enter FM mode.
- Press (1) to scan stations.
- Press (2) to manually scan forward.
- Press (3) to manually scan backward.
Using USB or TF Card
- Insert the USB or TF card (with MP3 Files) into the proper on the speaker.
- Control volume and playback as described above.
Charging
- The speaker contains a rechargeable Lithium-ion battery. Before use, highly recommend to charge the battery for at least 4 hours.
- With the provided cable, insert the mini USB plug into the speaker and the standard USB port on your computer.
- Press MODE button to switch between Wireless/FM Radio/ Micro SD.
Connection to Wireless device
- Turn the power switch to the ‘’on’’ position. After 5 seconds, you will hear a start-up chime.
- On your device, turn on Wireless to search, device name MO9062 and connect. For first time use, you may need to enter the password ‘’0000’’ to connect, newer versions may not need password and it will connect automatically, when it connected, the LED will flash slowly.
- Play audio from your device, you can control the audio from the unit:
- Previous track/volume down (3)
- Pause/Resume play (1)
- Next track/volume up (2). To change tracks or pause, press buttons quickly, to adjust volume, hold buttons down until desired volume volume is reached.
To answer a call
When a call comes through quickly press to answer (1): The speaker includes a microphone in the base, you will be able to hear and speak to the caller through the speaker. Press (1) quickly to hang up call
Troubleshooting
- Wireless cannot connect to device: confirm the speaker is under searching status and Wireless on your device is turned on.
- No sound: check the volume control on the speaker and check the volume control on the connected device.
- When the power on the speaker becomes low the star-up chime will sound every 20 seconds.
- When battery is depleted, it will enter a protection state. At this time, it cannot be used under charging, charge the speaker fully before next use.
Specifications
- Rated impedance: 40hm
- Rated power: 3W
- Rated voltage: DC 5V
- Frequency response: 280-16KHz
- Sensitivity: 80db±2dB
- SNR: >95dB
- Distortion: <0.3%
- Power supply: DC 5V Built-in lithium-ion battery
- Aux in: 3.5mm audio jack
- High sound pressure”
- “Hearing damage risk”
- “Do not listen at high volume levels for long periods
(2014/53/EU art. 10-8) (a) Frequency Range; 2402-2480MHz (b) Maximum radio- frequency power; 100mW (EIRP) (2014/53/EU art. 10-9Simplified Declaration of Conformity) Hereby, MOB, declares that item MO9062 complies with the essential requirements and other relevant conditions of directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.momanual.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>