LOOWOKO PWM03 Magnetic Wireless Power Bank User Manual
- June 4, 2024
- Loowoko
Table of Contents
LOOWOKO PWM03 Magnetic Wireless Power Bank
Product Introduction
Charging the device
- Connecting the Type-C interface of the Magnetic wireless Power Bank to the power adapter.
- The Battery indicator glow white in charging mode
For a more accurate display of the power level, it is recommended to perform two charge/discharge cycles.
Wireless Charging the phone
Put the device on the middle of the phone back, it can be adsorbed automatically and charging the phone at the When using wireless charging, the wireless charging indicator is always on; after disconnecting from the phone, the wireless charging indicator flashes slowly for 10 seconds and then turns off; when the wireless charging area touches a metal foreign object, the wireless charging indicator flashes quickly.
Wired Charging the phone
Use the charging cable to connect the magnetic wireless power bank and your phone.
Wireless applicable device
Devices built-in wireless charging receiver and support fast wireless charging. Galaxy S9 Plus/S10/S10 Plus/Note 10/Note 10 Plus, Huawei P30 Pro/Mate30/Mate30 Pro/P40 Pro stand charger for iPhone XS Max/Xr/11/11 Pro/11 Pro Max and all Qi-enabled devices.
Magnetic charging equipment
iPhone 12mini/12/12Pro/12Pro Max iPhone 13mini/13/13Pro/13Pro Max
Specifications
- Model No: PWM03
- Capacity:10000mAh/ 3.85V/38.5Wh
- Type-C Input:5V3A,9V2.2A,12V1.67A
- Type-C Output: 5V3A,9V2.2A,12V1.67A
- Wireless Output: 5W7.5W，10W，15W≤3-6mm
- Transmission distance:3-6mm
- Charging efficiency:75%
- Size :104×70.1514.5mm
- Unit weight: 1926 NW
Standard accessories
Magnetic Wireless Power Bank Type C cable User Manual
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not ccur in a particular
installation if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate he equipment.
This device complies with Part 5 of the FCC Rules. Operation is subject the following two conditions this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>