LOOWOKO L-MC-M1 Magnetic Wireless Charging Stand User Manual

LOOWOKO L-MC-M1 Magnetic Wireless Charging Stand

Magnetic Wireless Charging Stand (L-MC-M1)

Product Description

Thank you for choosing our magnetic wireless charging stand. Please read this manual carefully and keep it safe for future use.

1. Continuity fixed bracket
2. USB-C charging port
3. Two-stage bracket
4. Magnetic wireless charging area

Device Connected to Power

1. Connect the Type-C charging port of the device to the power adapter.
2. For a better experience, please use a power adapter of 20W or higher.

Charge Your Phone Wirelessly:
After connecting to the power adapter, place the device on the back of the phone. It will magnetically snap and start charging wirelessly.

Mobile Phone Stand Function

The two-stage bracket supports both horizontal and vertical bracket modes.

wireless charging area
Type-C input| Horizontal| Vertical|

Continuity Camera Mount Function

Continuity Webcam Function Use Continuity to connect your Mac and iPhone, and use your iPhone as a webcam for your Mac.

Charging Precautions

• This device is not compatible with non-MagSafe phone cases.
• Do not use an adapter less than 5W.For better performance, it is recommended to use an adapter above 20W.
• Wireless charging is more convenient, but limited by the current wireless charging technology,the charging speed will be slower than wired charging.
• High temperatures will decrease charging speed and limit power, which is a physical phenomena for all chargers.
• It is recommended to use it below 25℃ for better performance.
• Both the phone case and the distance between phone and charger will affect charging speed,which is decreased by distance augment.

Safety Precautions:

• Store this product in a cool dry place.
• Do not store this product in a high temperature or humid environment.
• The operating temperature should be between 0°C and 40°C (32°F and 104°F).
• If this product needs service or repair, please contact qualified repair personnel. Incorrect reassembly may result in a fire or risk of personal injury.
• The product may generate heat during charging,which is a normal phenomenon and there is nothing to worry about.
• Do not expose this product to heat or fire.
• Do not use harmful chemicals or detergents to clean this product.
• Improper use, dropping or excessive force may cause damage to this product.

Compatible Devices

Compatible devices for wireless charging:

• Samsung S9 Plus/S10/S10 Plus/Note 10/Note 10 Plus and above models
• Huawei P30 Pro/Mate 30/Mate 30 Pro/P40 Pro and above models
• iPhone 8/iPhone 8 Plus/iPhone X/iPhone XS Max/Xr/11/11 Pro/11 Pro Max and above

Compatible devices for magnetic wireless charging and Continuity Webcam Function:

• iPhone 12/13/14 series and above models
• MacBook Air (M2)/MacBook Pro (M2 pro)/MacBook Pro (M2 Max)

Specifications

Standard Accessories

• Magnetic wireless charging stand
• C to C charging cable
• Product manual

FCC statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions :

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>