Shenzhen Loowoko Technology LWC-F03 Metal Fast Wireless Charger User Manual

June 6, 2024
Shenzhen Loowoko Technology

Metal Fast Wireless Charger
High strength aeronautical aluminium
User Manual

Thank you for choosing our fast wireless charger and enjoy the relentless pursuit of perfection!
Please read over and keep this manual for your records.
Shenzhen Loowoko Technology LWC-F03 Metal Fast-
Charger

Connect to Power Adapter

Shenzhen Loowoko Technology LWC-F03 Metal Fast-
Connect

  1. Connect the Type-c to the port in the side of the pad.
  2. Connect the USB-A to the power adapter.
  3. Plug the power adapter into an electrical socket.

The LED indicator turns red and lights up for 3 seconds and then turns off.

Connect to Laptop for Charging

Shenzhen Loowoko Technology LWC-F03 Metal Fast-
ConnectJ

  1. Connect the USB end of the cable to the USB port on your laptop.
  2. The LED indicator turns red and lights up for 3 seconds and then turns off.

Shenzhen Loowoko Technology LWC-F03 Metal Fast- Computer for
Charging

  1. Connect the USB end of the cable to the USB port on your computer.
  2. The LED indicator turns red and lights up for 3 seconds and then turns off.

Charging Mode

Shenzhen Loowoko Technology LWC-F03 Metal Fast- ChaS

  1. The LED indicator turns red and lights up for 3 seconds and then turns off
  2. The green breathing light works when charging, and the green light is always on when fully charged.

Notice: Red light flashes when an error occurs.

Applicable devices

  1. Devices built-in with wireless charging receiver and supports fast wireless charging (IPhone 8 series/X series/11 series/12 series; Samsung S8/S9/S10/S20/Note8/Note10)
  2. Device built-in with wireless charging receiver(not fast charge) (Samsung S6Nokia 850XLMOTO 360 .,etc)
  3. Devices with reserved wireless charging contacts, shall be installed receiver coil (Samsung S5Note 4.,etc)
  4. Devices shall be installed case with receiver (iphone7/6s/6iPhone7 plus/6s plus/6 plus.,etc)

Specification

Input Type C: DC 5V/2.0A ; 9V/2A ; 12V/1.5A
Output: 5W ; 7.5W ; 10W ; 15W
Transmission distance: ≤ 8mm
Charging efficiency:≤ 80%
Size: 100.0 x 100.0 x 11 mm
Unit weight: 72g (NW)

Important Notes

  1. Do not disassemble, attempt to open, or break the product
  2. Keep away from fire and water
  3. Do not use in a hot or humid environment to prevent damage and potential harm to the user
  4. Keep away from items with a magnetic strip or chip card (credit cards, bank cards, etc.)
  5. This item is not a toy; please keep away from children
  6. Keep a distance of 20cm between the product and implantable medical devices to avoid potential interference

Standard accessories

  1. Wireless charger x 1 piece
  2. USB-A to Type-C cable x 1 piece
  3. User manual x 1 piece

LWC-F03

FCC ID2AYA9LWC-F03

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals