hoymiles HRSD-1C Transmitter Installation Guide
- June 3, 2024
- hoymiles
Table of Contents
HRSD-1C Quick Installation Guide
Appearance
Installation
Note:
- Allow a minimum of 1.5 cm of space between the roof and the HRSD-1C enclosure to ensure ventilation and heat dissipation.
Wiring
· Connect modules to HRSD inputs.
Note:
- When installing HRSD-1C, connect the input cables to the PV module before connecting the HRSD-1C output cables in series.
- If disconnecting HRSD-1C, disconnect the HRSD-1M output cables from the string before disconnecting the input cables from the PV module.
- Connectors from different manufacturers cannot be mated with each other.
- Transmitter must be powered off during HRSD-1C installation.
- HRSD-1C output Voltage is 0.9V to 1.1V when Transmitter “permission to operate” signal is not present.
Region: Global AP040555 REV1.1
© 2022 Hoymiles Power Electronics Inc. All rights reserved.
Read User Manual Online (PDF format)
Loading......