hoymiles HRSD-2C Transmitter Installation Guide
- June 3, 2024
- hoymiles
Table of Contents
HRSD-2C Quick Installation Guide
Appearance
Installation
Note:
- Allow a minimum of 1.5 cm of space between the roof and the HRSD-2C enclosure to ensure ventilation and heat dissipation.
Wiring
Note:
- When installing HRSD-2C, connect the input cables to the PV module before connecting the HRSD-2C output cables in series.
- If disconnecting HRSD-2C, disconnect the HRSD-2C output cables from the string before disconnecting the input cables from the PV module.
- If connecting HRSD-2C to a single PV module, first connect PV module to Input 1, then connect Input 2 cables together.
- Connectors from different manufacturers cannot be mated with each other.
- Transmitter must be powered off during HRSD-2C installation.
- HRSD-2C output Voltage is 0.9V to 1.1V when Transmitter “permission to operate” signal is not present.
Region: Global AP040557 REV1.1
© 2021 Hoymiles Power Electronics Inc. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>