arendo 305640 Water Kettle User Manual
- June 3, 2024
- arendo
Table of Contents
- arendo 305640 Water Kettle
- Important safety guidelines for this appliance
- Scope of delivery
- Technical data
- Product details
- Initial use
- Usage
- Descaling and cleaning
- Safety instructions and disclaimer
- Disposal instructions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
arendo 305640 Water Kettle
Important safety guidelines for this appliance
- This appliance is meant exclusive-ly for personal use and for the in-tended purpose. It is not intend-ed for commercial use.
- Please do not immerse it in water.
- Do not use the appliance out-doors and keep it away from sources of heat (e.g., electric stove) and direct sunlight. Please do not keep the appliance in immediate proximity to water sources (e.g., washbasin).
- Do not use this appliance with wet hands.
- Keep it on an suitable surface so that it does not tip over.
- Disconnect the power plug from the mains socket when the ap-pliance is not being used or for cleaning.
- Operate the product only with the voltage indicated on the ap-pliance label.
- This appliance is not intended to be used, cleaned or maintained by people (including children) with reduced physical, senso-ry or mental abilities or lack of experience and/or knowledge. Unless they are supervised by a person who is responsible for their safety or have received instructions from this person about how the appliance is to be used.
- Children should be supervised to ensure that they do not play with the appliance.
- In the interest of child safety, do not leave any packaging material (plastic bags, cardboard, polysty-rene, etc.) lying around.
- Fill the water tank only with cold water and do not boil the re-maining water a second time.
- Do not move the appliance when it is being operated.
- Do not open the lid during oper-ation, it could cause burns!
- Steam escapes from the top of the appliance during operation, maintain distance from the es-caping steam.
- The heating element remains hot for some time even after the appliance is switched off. Ensure that nobody touches the inside of the container. There is a risk of burns!
- Use the appliance only with the supplied shut-off device.
- Provide clearance to other ob-jects and walls so that the air can circulate freely. Do not cover the appliance.
- Do not boil any liquids other than water.
- The housing of the kettle be-comes hot during operation. Hold the kettle only using the handle provided for this purpose.
- If the power cable is damaged, then it should be replaced by the manufacturer, his specialist deal-er or an equally qualified person, so as to prevent any risk.
- In the process, children should use or clean the appliance only under supervision or guidance.
- Do not overfill the kettle, as wa-ter may spurt out.
- This appliance is intended for use at home and similar places. For applications as in
- staff kitchen areas in shops, offices and other workplaces;
- farmhouses;
- hotels, motels and other types of residential surroundings by customers
- Keep children away from the ap-pliance. Ensure that they do not play near the appliance.
Thank you for choosing an Arendo product. Please read the following user man- ual carefully so that you can enjoy the purchased product for a long time. Before using the product, first check that the delivered item is complete, accurate and undamaged.
Scope of delivery
- Kettle
- Baseplate with connection cable
- User manual
Technical data
Power supply | 220-240 V AC, 50/60 Hz |
---|---|
Power consumption | 1850-2200 W |
Water filling capacity | max. 1.7 l |
Temperature settings | 40°C, 50°C, 60°C, 70°C, 80°C, 90°C, 95°C, 100°C can be |
selected
Features| • Automatic shutdown
• audible beep
• Keep-warm function (30 min)
• Auto display (Off) after 3 minutes
• Intermediate measurements for more accurate target temperatures
• The LED display shows the configured and measured temperature
Operating temperature /
relative humidity
| 0°C~45°C / 0-80%
Storage temperature
/ Relative humidity
| -10°C~60°C / 0-95%
Product details
Display symbols
Symbol | Meaning |
---|---|
**** | **** Keep warm |
**** | **** Heating |
Initial use
Remove the kettle and the base with connection cable out of the packaging and connect the baseplate to a properly installed earthed socket. Wipe the surface of the kettle using a slightly dampened cloth.
To remove any manufacturing residues, fill the water container once with cold wa-ter up to the maximum mark before using it for the first time. Boil the water by adjusting the temperature to 100°C using the “+” and “-” buttons. The configured temperature flashes in the display. Then press the “Start” button below the display to switch on the unit. Then discard the water.
Usage
Press on the lid opener to open the tiltable lid. Fill the kettle with cold
water and press the lid down until it locks into place.
Note: A scale is provided on the outside behind the handle. Do not fill
the con-tainer above the maximum mark. The boiling water may spurt out if the
kettle is overfilled.
Place the kettle on the base plate. The ACTUAL temperature of the water in the
kettle is now shown on the LED display.
If the appliance is not used for 3 minutes, the display switches off
automatical-ly. The display can be reactivated by pressing any button or by
simply lifting and placing the kettle back on the base. Press the “+” and “-”
buttons and select the desired temperature. Press the “Start” button to start
using the appliance (you hear a short beep), which is indicated by the
(heating) symbol shown in the display above the temperature display. Once the
water reaches the target temperature, you hear the beep 3 times. The heating
element switches off automatically and the boiling process is stopped. The
appliance can now be lifted and the water can be used. If you want to stop the
boiling process early on, you can press the “Start” button at any time.
The kettle stops the heating process to carry out an intermediate measurement before reaching the target temperature. Please wait until the boiling process is completed. You will hear a beep at the end.
Keep-warm function
The “KEEP WARM” function is meant to keep the boiled water warm for a long
period of time. Set the desired temperature using the “+” and “-” buttons.
Press for the “KEEP WARM” button to start. The kettle activates the keep warm
function for 30 minutes and maintains the configured temperature after
reaching the target temperature. This is indicated by the (Keep warm) symbol
shown in the display above the temperature display.
Toggling between °C / °F
Press and hold the “KEEP WARM” button to change between °C and °F.
Descaling and cleaning
- We recommend to descale the kettle at regular intervals depending upon the intensity of use.
- Before cleaning, pull out the power plug and wait until the appliance cools down completely.
- Please use only commercially available descaling agents based on citric acid to descale the water container.
- For the appropriate dosage, please refer to the specifications on the package or insert of the descaling agent.
- The heating plate should not be specifically cleaned. Do not use any hard objects on the heating plate.
- Use only a damp cloth for cleaning the kettle externally.
- Do not use any abrasive items like wire brush or steel sponge.
- Never use any cleaning agents which may corrode the surface or present a health risk if consumed!
- Never immerse the appliance, the power cable or the plug in water or in any other liquid to prevent risk of electric shock.
- For appliances with anti-scale filter in front of the pouring opening, proceed as follows: Open the lid and press the plastic tab of the anti-scale filter down to remove the filter. Rinse the filter thoroughly using warm water and then replace it back into its position. When replacing, ensure that the anti-scale filter sits properly in the guide rail.
Use a quick descaler for particularly stubborn limescale deposits or signs of flash rust. Once limescale is formed, iron and oxidised iron particles get deposited in the lime layer. This often produces a reddish colour giving the impression that the actual material is rusting. However, if it is not promptly taken care of, this rust caused by the oxidised iron particles in the lime can actually attack the kettle material.
Safety instructions and disclaimer
Please do not try to open the appliance to carry out repairs or modifications by yourself. Avoid contact with the mains supply. The appliance does not carry current only when disconnected. Please do not short-circuit the product. Do not forget to disconnect the power cord when the appliance is not being used or during thun-derstorms. The appliance is not approved for outdoor use. Please use it only in dry surroundings. Protect it from high humidity, water and snow.
Never expose the appliance to high outdoor temperatures. Do not expose the appliance to sudden changes in temperature or heavy vibrations, as this could dam-age the electronic components.
Check the appliance for any damages before using it. The appliance should not be used if it has been subject to impact or has been damaged in some other way. Please follow the national regulations and restrictions. Do not use the appliance for purposes other than those described in this manual. This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Use the appliance only with the supplied base plate. Any repairs or modifications to the appliance not carried out by the original supplier will void any warranty and guarantee claims. The appliance should be used only by persons who have read and understood this user manual. The specifications of the appliance may be changed without any spe-cial prior notification. The appliance should be used only by persons who have read and understood this user manual.
Disposal instructions
In line with the European WEEE directive, electrical and electronic appliances should not be disposed of along with domestic waste. Their components have to be separately sent for recycling or disposal, because improper disposal of toxic and dangerous components may permanently damage the environment. According to the Electronic Equipment Act (ElektroG), you are obliged (as a consumer) to return (free of charge) all electrical and electronic appliances to the manufacturer, the point of sale or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations. With this manner of sorting, recycling and disposal of used appliances, you make an impor-tant contribution towards protecting our environment.
WEEE directive 2012/19/EU
WEEE Register no.: DE 67896761
The company WD Plus GmbH hereby certifies that the appliance 305640 complies with the fundamental requirements and all other relevant stipulations. A complete conformity state-ment can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover; https://downloads.ganzeinfach.de/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>