arendo 303236 Coffee Grinder User Manual
- June 5, 2024
- arendo
Table of Contents
- arendo 303236 Coffee Grinder
- Important safety guidelines for this device
- Scope of delivery
- Technical specifications
- Product details
- Getting started
- Initial use
- Clean and Care
- Tips for grinding coffee
- Safety instructions and disclaimer
- Disposal Instructions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
arendo 303236 Coffee Grinder
Important safety guidelines for this device
- Never keep the coffee grinding machine unattended; keep it out of reach of animals and children wherever you use or store it.
- Children shall not play with the device.
- The device may be used by persons with reduced physical, sensory or mental abilities or lack of experience and/or knowledge if they have been supervised or instructed in the safe use of the device and have understood the resulting hazards. The device must not be used by children.
- Keep the coffee grinding machine out of reach of children.
- Keep it on an appropriate surface so that it does not tip over.
- Do not keep the coffee grinding machine directly on heat sources (e.g. electric cooker).
- Unplug the power plug when the device is not in use or during cleaning.
- Switch off the device and allow it to cool down completely before cleaning it.
- Do not move the device when it is in operation.
- Ensure that the power cable does not touch any hot surfaces.
- If you want to pull out the plug from the socket, pull by holding the plug and not the cable.
- Never touch the plug with wet hands.
- • Protect the device against fire.
- Do not immerse the cable, the plug or the entire device in water or other liquids.
- This device is exclusively meant for domestic use.
- This device is not intended for commercial use.
- Check if the mains voltage specified on the nameplate corresponds with the voltage in your home.
- Connect the device only to properly installed sockets.
- In order to avoid overheating of the motor, we recommend letting the unit cool down for 30 minutes after 5 minutes of operation. To avoid overheating of the motor, we recommend letting the unit cool down for 30 minutes after 5 minutes of operation.
- This device may only be used for grinding coffee beans.
- If the power cable is damaged, it should be replaced by the manufacturer, his specialist dealer or an equally qualified person, so as to prevent any risk.
- Misuse can lead to injuries.
- The device must always be disconnected from the mains before assembly, disassembly or cleaning.
- Turn off and unplug the device before changing (replacing) accessories or approaching parts that move during use.
Thank you for choosing this product from Arendo and for placing your trust in our company. Please read this manual carefully to ensure your long-term satisfaction and longevity of this product. For future reference, please keep this manual.
Scope of delivery
-
* Arendo Copán Conical Burr Grinder
- User Manual
Technical specifications
Operating voltage | 220 – 240V~ 50-60 Hz |
---|---|
Power input | 150 W |
Net weight | 2090 g |
Protection class | II |
Ambient temperature | + 0-3°C until 35-40°C |
Actual capacity | 350 g |
Features | • Built-in safety circuit |
• Transparent container
• Grinder
• Rubber feet
Product details
Getting started
Take the device out of the box and remove any packaging remnants. Clean the
device and the supplies as described under “Clean and Care”. Place the mill on
an even surface. Put the bean container on the bean hopper holder. Make sure
to align the tab on the bean container with the groove on the bean hopper
holder and then turn the bean hopper clockwise until it is tightly locked into
the bean hopper holder. When disassemble, press down the bean hopper holder
release button and simultaneously turn the bean container anti-clockwise to
remove the bean container from bean hopper holder.
The bean hopper is assembled with a security switch. The device will only work
if the bean hopper is inserted correctly into the bean hopper holder. Please
ensure to not fill in more than 350g of coffee beans.
Initial use
Close the cover of the bean hopper. Put the bean hopper (with cover) on the
bean hopper holder. Keep in mind that the opening of the ground coffee
container shall be aligned with the coffee powder outlet. Plug the power cable
into the socket. The Start/Stop button will flash. Turn the ground control to
select your desired coffee strength. Turning it to the right, the coffee
powder will be coarse, while it will be finer when turning the grind control
dial to the left. The dispensed amount of coffee is depends on the grinding
time (see table at the end of this text). You can use the filling quantity
control dial to set your desired amount of coffee. Choose your desired grind
rate and press the Start/Stop button. After a while the coffee powder will
come out of the opening of the ground coffee container. While grinding, the
Start/Stop button will flash continuously.
Hint: The maximum amount of ground coffee the container holds is 150g.
The ground coffee container shall not overflow.
Grinding time
control
| Grinding time
---|---
1| 5 seconds
2| 20 seconds
3| 35 seconds (recommended at level 15, until container is full)
4| 60 seconds
5| 85 seconds
6| 115 seconds (recommended at level 1, until container is full)
Clean and Care
Be sure to unplug this device and let it cool down completely before cleaning. To prevent from an electrical shock, do not immerse cord, plug or body in water or liquid and do not fill the bean hopper with water for cleaning. After each use, always first remove the plug from the power outlet. Clean the device and its accessories with a soft damp cloth. Use a mild cleaning agent. Do not use aggressive cleaning agents! Dry off the device thoroughly after use. Lift the handle of grinding wheel and rotate it anticlockwise to remove the grinding wheel, clean the residual coffee powder on the grinding wheel and grinding blade with a brush and pour the residual coffee powder out. Take out the bean hopper out of the bean hopper holder. Clean the bean hopper, the bean hopper lid, the coffee container and the coffee container lid with water and dry them thoroughly. Hold the grinding wheel at the handle and turn it anti- clockwise to take it out. To place the grinding wheel back in position, firstly, put the grinding wheel into the grinding chamber by aligning the groove on the grinding wheel with the tab on the grinding chamber, and rotate the grinding wheel clockwise until it is fixed well in place. Disassemble the bean hopper by following the operation mentioned above, and then rinse the bean hopper, bean hopper lid, ground coffee container and ground coffee container lid with water, and dry them thoroughly.
Tips for grinding coffee
The coarse ground coffee is generally used for percolators and coffee urns.
Medium ground coffee is used for drip coffee makers and steam-type espresso
machines. A fine ground coffee is used for espresso machines with an electric
pump. For the freshest, most flavorful coffee, grind only the amount of coffee
for the pot you are making. Coffee beans keep fresh up to 2 months in the
freezer in an airtight container and can be ground while still frozen. Coffee
ground left in your grinder can turn stale and affect the flavor of freshly
ground coffee. Do not grind peanuts or grains such as wheat, rice, barley, or
dried corn. Attempting to grind any of these foods may damage the unit.
Be sure to clean grinding chamber and grinding wheel after each use. This
grind-er can only grind coffeebeans. It will not grind anything moist,
extremely hard, or gummy such as whole ginger, chocolate, sesame seeds or oily
spices such as cinnamon, cloves or nutmeg. Never use it to chop ice
cubes.Freshly ground pep-percorns have a strong aroma and taste that may
affect the flavor of coffee beans ground afterward. You may want to purchase a
separate grinder if you plan to grind peppercorns.
Safety instructions and disclaimer
Do not attempt to service this product by yourself as opening or removing
covers may result in fire, electric shock or equipment damage. Please avoid
any contact to the electric current. This product is only licensed for indoor
use and dry areas. Please protect it from water, rain, snow or high humidity
and keep it away from high temperatures and direct sunlight. Do not expose
this product to extreme and sudden changes of temperature or heavy vibrations;
this may lead to damage of the internal electronic part of this unit. Check
this product for signs of damage before putting it in operation. In case the
device received any damage, it should not be used. Please contact our customer
support. Please observe the relevant national provisions and legal
restrictions.
Do not use this product for anything other than intended and as described in
the manual. Any attempt of repairs or alterations by someone other than the
original supplier will invalidate the guarantee and result in refusal of
warranty claims. Persons who are familiar with the operating manual and the
applicable regulations concerning working safety and accident prevention may
only use the network card. This unit is not intended to be used by persons
(including children) with limited physical, sensory or mental aptitude or lack
of experience and/or knowledge unless they are supervised by a person
responsible for their safety or have received instructions as to how the
device is used properly. The technical specifications of this product may
change without prior notice.
Disposal Instructions
The European Directive (WEEE) requires that old electrical and electronic appliances shall be disposed of separately from normal household garbage for optimal recycling. The component parts must be separated, collected and sent for recycling or disposal in an environment-friendly manner. Otherwise, toxic and dangerous substances could cause enduring damage to the environment if disposed of incorrectly. As a consumer, you are legally obligated (Electrical and Electronic Equipment Act-ElektroG) to return electronic equipment at the end of its lifetime to their manufacturer, point of sale, public collection points or import-er free of charge. The relevant local laws apply here. The symbol on the product, in the instructions or on its packing indicates these regulations. The reuse or recycling of materials and old units makes an important contribution towards protecting the environment.
WEEE guideline: 2012/19/EU WEEE register number: DE 67896761
WD Plus GmbH, herewith declares that this product 303236 conforms to the
principle requirements and other relevant stipulations. The complete
Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße
16, 30719 Hanover
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>