arendo 303234 Solid Control Water Kettle User Manual
- June 6, 2024
- arendo
Table of Contents
**arendo 303234 Solid Control Water Kettle User Manual
**
Important safety guidelines for this appliance
- This appliance is meant exclusively for personal use and for the intended purpose. This appliance is not intended for commercial use.
- Do not use the appliance outdoors and keep it away from heat sources (e.g. electric stove) and direct sunlight. Please do not keep the appliance in the immediate vicinity of water sources (e.g. washbasin).
- Do not use this appliance with wet hands.
- Keep it on an appropriate surface so that it does not tip over.
- Disconnect the power plug from the mains socket when the appliance is not being used or for cleaning.
- Operate the appliance in accordance with the voltage that is indicated on the appliance label.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance can be operated by children from 8 years of age and above, as well as by people with reduced physical, sensory or mental capacities or who lack knowledge or experience, if they have been supervised or instructed regarding safe use of the device, and understand the resultant dangers.
- Cleaning and user maintenance should not be done by children, unless they are older than 8 years old and are supervised.
- Keep the appliance and the cable out of the reach of children aged less than 8 years.
- In the interest of child safety, please do not leave any packaging material (plastic bags, cardboard, polystyrene, etc.) lying around.
- Fill the water tank only with cold water and do not boil the remaining water a second time.
- Do not move the appliance when it is being operated.
- Do not open the cover during operation. This may cause burns!
- Steam escapes from the top of the appliance during the operation. Stay away from the escaping steam. Danger of burns!
- The heating element remains hot for some time even after the appliance is switched off. Ensure that nobody touches the inside of the container. There is a risk of burns!
- Use the appliance only with the supplied shut-off device.
- Provide clearance to other objects and walls so that the air can circulate freely. Do not coverthe appliance.
- Do not boil any liquids otherthan water.
- The housing of the kettle becomes hot during operation. Therefore hold the kettle only using the handle provided for this purpose.
- If the mains power cable of this appliance is damaged, it should be replaced by the manufacturer, his after-sales service personnel or by an equally qualified person, so as to prevent any risk.
- Children should use or clean the appliance only under supervision or guidance.
- Do not overfill the kettle, otherwise water may spurt out.
- The water level should be between the maximum and minimum marks!
Thank you for choosing an Arendo product. Please read the following user manual carefully so that you can enjoy the purchased product for a long time. Before using the delivered product, check that it is complete, faultless and undamaged.
- Scope of supply
- Kettle
- Base with connection cable
- User manual
- Technical data
Power supply| 220-240V AC, 50/60Hz
---|---
Power consumption| 1850 – 2200W
Water filling capacity| Max 1.5 litres
Temperature settings
|
* 70°C
* 80°C
* 90°C
* 100°C Ambient temperature| + 0-3°C until 35-40°C
Features|
* Stainless steel glass body design
* Automatic switch off
* Keep-warm function
* Audible signal
* Borosilicate glass
* Base in brushed stainless steel and with integrated cord storage
* 4 temperature selector buttons with blue outside edge lighting (LED) Product details
Initial use
When the device is put into operation for the first time, check the intactness of the product or components and their function again. Remove the kettle and the base station out of the packaging and connect the base to a properly installed earthed socket.
Wipe the surface of the kettle using a slightly dampened cloth. To remove any manufacturing residues, fill the water container once with cold water up to the maximum mark before using it for the first time. Boil the water by pressing the “100°C” button and then pressing the “ON / OFF” button at the top of the base station. Discard the water after the initial boiling. Never operate the device unattended and check it before each use for possible damage and correct mounting.
Repeat this process as needed.
This appliance is intended for domestic use and similar applications such as:
In staff kitchens in shops, offices and other business areas, in agricultural
properties, by customers in hotels, motels and other residential facilities as
well as B&Bs.
Usage
Press the Lid-opener. The tilting lid opens. Fill the kettle with cold water and press the lid down until it locks into place.
Note: A scale is provided on the outside. Do not fill the container above the maximum mark. The boiling water may spurt out if the kettle is overfilled. Then, place the kettle on the base plate. Buttons for selecting various water temperatures are provided on the base station. Press the button corresponding to the temperature you desire. The button starts flashing. Press the “ON/OFF” button to start the boiling function subsequently. As soon as the water reaches the set temperature, the kettle switches off and you hear two beeps. Please note that short pauses may occur during cooking processes below 100°C due to intermediate measurements. Please wait until the cooking process is finished, which is confirmed by the beep signal. The heating element switches off automatically and the boiling process is stopped. The appliance can now be lifted and the water can be used.
“KEEP WARM”
The “KEEP WARM” function allows you to maintain a set temperature. To do this press “KEEP WARM” and select a temperature. Please note that you can only select 70°C, 80°C or 90°C. Once the desired temperature is selected, press the “ON/ OFF” button. Following this, the kettle heat to the set value and maintains this temperature for one hour. Press the “ON/OFF” button to interrupt this operation.
If you remove the kettle from the station during the keep-warm function, the appliance is switched to the standby mode.
Descaling and cleaning
We recommend to descale the kettle at regular intervals depending upon the intensity of use. Before cleaning, pull out the power plug and wait until the appliance cools down completely. Please use only commercially available descaling agents based on citric acid to descale the water container.
For the appropriate dosage, please refer to the specifications on the package or insert of the descaling agent. The heating plate should not be specifically cleaned. Do not use any hard objects on the heating plate. Use only a damp cloth for cleaning the kettle externally. Do not use any abrasive items like wire brush or steel sponge for cleaning. Never use any cleaning agents which may corrode the surface or present a health risk if consumed! Never immerse the appliance, the power cable or the plug in water or in any other liquid to prevent risk of electric shock.
Please note!
Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components. Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.
Disposal instructions
Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly. As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment.
WEEE guideline: 2012/19/EU
WEEE register number: DE 67896761
WD Plus GmbH, herewith declares that this product 303234 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hanover