ANVIZ M-Bio Portable Bluetooth Enabled Fingerprint & RFID Device User Guide

Secure Workplace, Simplify Management
M-Bio
Portable Bluetooth Enabled Fingerprint & RFID Device
Quick Guide v1.1

Package List

Notification:

1. Please check if the package contains all the items listed above. Contact the distributor if there is any problem.
2. Please keep the product away from the magnetic field, and avoid causing any damage to the device.
3. Please use the original power supply or refer to the instruction to get the right power supply.
4. Please strictly follow the instructions to install the product. Any damage to it caused by incorrect operation and wiring is not under warranty.

Illustration for Placing Finger

Correct Method
( Straighten your finger and then place it on the sensor Ensure the finger is flat and covers the entire sensor)

Always place finger in the center of the sensor.| Try to place your finger covers the entire sensor.
---|---
|

Incorrect Method

DO NOT place the finger over an excessive angle.| DO NOT place finger away from the center of the sensor.
---|---
|
DO NOT take off finger during the verification process.| DO NOT place finger at an angle.
|
DO NOT just use your fingertip.| DO NOT slide your finger during the fingerpint verification process.
|

Appearance

Operation Guide

IMPORTANT:
M-Bio is suitable for USB 5V power supply only. Plug in the power the device will automatically power on.
Register User:
Add One Fingerprint per User Only:

1. After finish enrolling the current user, the device will continue to register another user.
2. After finish enrollment, please swipe enroll card to exit enroll status.

Add Card Only:

Notice:
During the device is in the register mode without any operation for 3 sec, the M-bio will back to the normal mode.

Delete User:
Delete Fingerprint or Card
After deleting one user, you can continue to delete another user or swipe Delete Card to exit delete mode.

Notice:
During the device is in the delete mode without any operation for 3 sec, the M-bio will back to the normal mode.

Delete Card:
After deleting one user, you can continue to delete another user or swipe Delete Card to exit delete mode.

Notice:
When you swipe a card on M-Bio, a Red LED flashing with long beeps means the card does not exist in the device.

Login WebServer

Login to M-bio Webserver to manage the device.
M-bio is default with WIFI AP function.
Please connect M-Bio WIFI AP WIFI SSID: M-bio
Default Password: 123456789

Please input the default address (192.168.2.234) in the browser to log in to Webserver.
Account: admin
Default Password: 12345

User Register By WebServer

Click the “Add” Button at the top right of the web to register the User.

Fill in the employee’s information and click “Fingerprint Enroll” to enroll the user’s finger on the M-Bio device.

Call
+1-855-ANVIZ4U | +1-855-268-4948
MON-FRI 5 AM-5 PM Pacific
Email
support@anviz.com
24 Hours Answer
Text
+1-408-837-7536
MON-FRI 5 AM-5 PM Pacific
Community
Join community.anviz.com
if you have any questions or suggestions to share

Scan and download software
CrossChex Mobile App

https://www.anviz.com/app/CrossChexMobile

CrossChex Standard

|
---|---

https://bit.ly/2Vn0wh6

|

https://bit.ly/2J9qA95

References

• Anviz Community - Secure Workplace, Simplify Management
• Anviz Global | Secure workplace , Simplify management

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>