ANVIZ FACEDEEP 3 IRT Touchless Facial Recognition Access Control Instructions
- June 6, 2024
- ANVIZ
Table of Contents
CAUTION
Temperature Measurement
- Warm up the device for at least 20 minutes after power-on to enable the device to reach thermal equilibrium.
- Maintain an ambient temperature at between 15°C to 32°C (59°F to 89 6°F). Recommend to enable the “Low Temp. Access” option if the ambient temperature is below 15°C (59°F).
Installation
- Please install the device at the best height of approximately 1.4 meters (55.12 inches) from the top of the device to the ground.
- Avoid backlight and direct sunlight.
Anviz Global Inc.
41656 Christy Street Fremont, Fremont, CA, 94538 Toll-free:
1-855-268-4948 |
[email protected] |
www.anviz.com
©2021 Anviz Global Inc. Anviz and identifying product names and numbers herein
are registered trademarks of Anviz Global Inc. All non-Anviz brands and
product names are trademarks or registered trademarks of their respective
companies. Product appearance, build status, and/or specifications are subject
to change without notice.
Read User Manual Online (PDF format)
Loading......