Klipsch R 15M Bookshelf Speakers User Guide
- June 3, 2024
- Klipsch
Table of Contents
Klipsch R 15M Bookshelf Speakers
Specifications
- DIMENSIONS: 8 x 18.1 x 12.8 inches
- WEIGHT: 4 pounds
- FREQUENCY RESPONSE: 62Hz – 24kHz +/- 3dB
- SENSITIVITY: 94dB @ 2.83V / 1m
- POWER HANDLING (CONT/PEAK): 85W/340W
- NOMINAL IMPEDANCE: 8 Ohms Compatible
- LOW FREQUENCY EXTENSION: 54Hz
- CROSSOVER FREQUENCY: 1800Hz
- HIGH-FREQUENCY DRIVER: 1″ (2.54cm) Aluminum diaphragm compression driver mated to 90° x 90° square Tractrix® Horn
- LOW-FREQUENCY DRIVER: 25″ (13.3cm), copper spun magnetically shielded IMG woofer
Introduction
Aluminum tweeters and our proprietary Tractrix® Horn technology produce the most stunning high-end response with increased extension, improved imaging, and robust dynamics. This produces the purest, most authentic sound that is conceivable.
REFERENCE (n):
- the standard, the benchmark, the point used for comparison
- the embodiment of the legendary Klipsch sound
LOUD AND PROUD SINCE 1946
In 1946, Paul W. Klipsch revolutionized the audio industry by creating our proprietary horn technology and the acoustic principles that are the driving force behind our highly acclaimed signature sound. Today, we remain true to PWK’s vision and pack the better part of a century’s worth of sweat and genius into every product we make. These speakers are the result of our obsession with that aural perfection. Experience the power, detail and emotion of Klipsch Reference. We are the Keepers of the Sound®.
REFERENCE SPEAKERS
BEFORE YOU START
Some Klipsch® speakers have feet and other accessories that may need to be installed prior to use. Please refer to Diagrams 1, 2 and 3 for installation.
ROOM PLACEMENT
Left and Right Main Channel Speakers — For optimum performance, Klipsch Group, Inc. (KGI) suggests placing your speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the distance separating the speakers. Refer to Figures 1 and 3 for connection and placement.
Center Channel Speakers — Center channel speakers are designed to place dialogue and primary sounds so that they appear to come from the video screen. The speakers should therefore be placed as close to the screen as possible, preferably directly on top of or below the screen. Refer to Figures 1, 2 and 3 for connection and placement.
Rear Surround Channel Speakers — Klipsch WDST surround speakers should be placed approximately 2 feet above the listening position. Typically this will be about 5-7 feet above the floor. The surrounds should be placed on the walls directly adjacent to the listening position. Another option would be on the wall behind the listening position. The final surround speaker placement depends on your room’s characteristics. They are designed to recreate the sense of space and ambience that many of today’s surround sound technologies provide. Refer to Figures 1, 3 and 4 for connection and placement.
Please note that surround grilles are fixed and cannot be removed.
CONNECTION
Conventional Connection — Using 16-12 gauge speaker wire, connect the RED “positive” (+) terminal of the LEFT speaker to the RED “positive” (+) terminal of your amplifier’s LEFT channel. Connect the BLACK “negative” (–) terminal of the LEFT speaker to the BLACK “negative” (–) terminal of your amplifier’s LEFT channel. Repeat this procedure for connecting all remaining speakers to the appropriate amplifier channels. Refer to Figure 3. Make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment.
Some Klipsch Reference speakers come with dual binding posts that are connected by a metal strip. Do not remove this strip or your speakers will not function correctly. Keep this strip in place and connect your speaker wire to the top set of the binding posts. It is possible to “Bi-wire” a speaker that has two sets of binding posts. Please see your receiver’s manual for further instructions.
Amplifier Requirements — Klipsch speakers are highly efficient and will operate easily on a wide variety of amplifiers. All Klipsch speakers are 8-ohm compatible and can be driven to very high levels with low distortion. Due to the high output levels Klipsch speakers are capable of reproducing, exercise caution with the volume control. Excessive volume over long periods can permanently damage your hearing. Overdriving your amplifier could also damage your speakers. Check with your dealer or amplifier manual to make sure your particular amplifier is best suited to your application. We want you listening for a lifetime.
CARE AND CLEANING
The only thing you should ever need to do to your speakers is dust them occasionally. Never apply any abrasive or solvent-based cleaner or any harsh detergent. You can clean the grilles with the brush attachment of a vacuum cleaner.
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
- Keep up-to-date on new products and promotions.
- Your personal information will never be resold.
- This registration information is not used for warranty purposes. Please retain your receipt for warranty claims.
FREQUENTLY ASKED QUESTIONS
Can this work with a TV?****
The speakers cannot be connected directly to the TV since they require a receiver/amplifier to magnify the signal from the TV.
Can I use Bluetooth or Wi-Fi to broadcast music from my iPhone?****
Yes, if you connect it through an amplifier.
Are Klipsch bookshelf speakers good?****
A great all-purpose bookshelf speaker that works with many different gadgets is the Klipsch R-15M. Although not ideal for analytical listening, it offers a lively and vivid sound that will make you fall in love with your favorite songs all over again.
Are Klipsch speakers high end?****
For more than 50 years, Klipsch has been a leader in the high-end speaker industry, and its products are renowned for their excellent sound, high quality, and dependability.
Why do Klipsch speakers have 4 terminals?****
A cup with four input terminals is a characteristic of some of our premium speakers. The speaker can be “bi-amped” with the use of these extra input connections. Please take note that binding posts marked “Main” and “Height” are NOT intended to be “bi-amped.”
How far apart should Klipsch speakers be?****
The distance between the two speakers should be at least as great as the distance between each speaker and the listener, which is typically six feet or more. He says, “Imagine yourself as the center of an equilateral triangle, with your left and right speakers as the points.
Do Klipsch speakers need an amp?****
Yes, they need an amplifier.
What are bookshelf speakers best for?****
Bookshelf speakers should not be placed on the ground; instead, they should be placed on a shelf, table, or other elevated surface. They are made with the intention of enhancing sound in tiny to medium-sized settings.
Are bookshelf speakers worth it?****
They do not produce as much bass and do not occupy as much visual or physical space as larger tower speakers. However, a good set of bookshelf speakers will offer a satisfyingly full sound for the majority of listeners and musical genres.
Are bookshelf speakers better than a soundbar?****
Due to their larger speaker drivers and physical speaker cabinets, bookshelf speakers typically deliver superior sound quality than Soundbars. Premium sound quality is offered by some soundbars, particularly in 3.1 and 5.1 variants.
How far should I sit from bookshelf speakers?****
As soon as you have a general idea of where you will sit to listen, arrange your speakers such that they make an equilateral triangle with that spot. Divided speakers. For bookshelf speakers, aim for a distance of 4 feet, while for floor-standing speakers, aim for 8 feet.
Do you need a subwoofer with bookshelf speakers?****
Not all bookshelf speakers are made equal, and the best audio performance may be achieved without a standalone subwoofer with the correct design and high- quality parts. All things considered, many bookshelf speaker systems can perform just well without a subwoofer.
Do bookshelf speakers need to be away from the wall?****
Both bookshelf speakers should be situated two to three feet from the back wall and at an equal distance from the side walls for the best sound. Audiophiles refer to the ideal listening spot in a space where the sound is most balanced as the “Sweet Spot.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>