ABH PT105 105° Door Swing Power Transfer Instruction Manual
- June 3, 2024
- ABH
Table of Contents
PT105 105° Door Swing Power Transfer
Instruction Manual
PT105 105° Door Swing Power Transfer
NOTES:
- USE TRANSFER CASE HOUSING AS DRILLING TEMPLATE.
- ONLY STRANDED WIRES TO BE EMPLOYED.
- SPRING CONDUIT FITS WIRE BUNDLES UP TO 5/16″ THICK.
- USE CARE WHEN INSERTING WIRES THROUGH THIS DEVICE.
- RECTANGULAR CUT-OUT IS 11/16″ DEEP (MIN.) FOR WOOD FRAME.
- WIRES SHOULD BE LABELED.
- SIZE AND NUMBER OF WIRES MUST COMPLY WITH THE NATIONAL ELECTRICAL CODE, NFPA, AND LOCAL ELECTRICAL CODES.
- THIS DEVICE IS INTENDED FOR LOW VOLTAGE USE ONLY (30 VAC, 42.5 VDC, 10 WATTS MAX.)
SCREW DETAIL
| QTY|
FRAME| 2| #8 X 3/4″ PH. FLAT HEAD SHEET METAL SCREW
2| 8-32 x 3/8″ PH. FLAT
HEAD, UC. MACHINE SCREW
DOOR| 2| 6-32 X 1/4″ PAN HEAD MACHINE SCREW
www.abhmfg.com
E-mail: abhinfo@abhmfg.com
Architectural Builders Hardware Mfg., Inc.
1222 Ardmore Ave., Itasca, IL 60143 630.875.9900;
FAX 800.9FAXABH (932.9224)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>