ABH MANUFACTURING INC PTR105 Electrical Power Transfer Unit Instruction Manual

June 4, 2024
ABH MANUFACTURING INC

PTR105 TEMPLATE-05.DWG
PTR105
PAGE 1 OF 1
REVISED 11-05-21

PTR105 Electrical Power Transfer Unit

PTR105 INSTALLATION TEMPLATE

NOTES:

  1. USE TRANSFER CASE HOUSING AS
    DRILLING TEMPLATE.

  2. ONLY STRANDED WIRES TO BE EMPLOYED.

  3. SPRING CONDUIT FITS WIRE BUNDLES UP TO 5/16″ THICK.

  4. USE CARE WHEN INSERTING WIRES THROUGH THIS DEVICE.

  5. RECTANGULAR CUT-OUT IS 11/16″ DEEP (MIN.)
    FOR WOOD FRAME.

  6. WIRES SHOULD BE LABELED.

  7. SIZE AND NUMBER OF WIRES MUST COMPLY WITH THE NATIONAL ELECTRICAL CODE, NFPA, AND LOCAL ELECTRICAL CODES.

  8. THIS DEVICE IS INTENDED FOR LOW VOLTAGE USE ONLY (30 VAC, 42.5 VDC, 10 WATTS MAX.)

SCREW DETAIL

| QTY|
FRAME| 2| #8 X 3/4″ PH. FLAT HEAD SHEET METAL SCREW
2| 8-32 x 318″ PH. FLAT
HEAD, UC, MACHINE SCREW
DOOR| 2| 6-32 X 114″ PAN HEAD MACHINE SCREW

www.abhmfg.com
E-mail:abhinfo@abhmfg.com
Architectural Builders Hardware Mfg., Inc.
1222 Ardmore Ave., Itasca, IL 60143
630.875.9900; FAX 800.9FAXABH (932.9224)
©2021 ABH Mfg., Inc. printed in USA

Documents / Resources

| ABH MANUFACTURING INC PTR105 Electrical Power Transfer Unit [pdf] Instruction Manual
PTR105 Electrical Power Transfer Unit, PTR105, Electrical Power Transfer Unit, Power Transfer Unit, Transfer Unit, Unit
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals