SANSUI LS460 Smart Sports Watch Instruction Manual
- July 31, 2024
- SANSUI
Table of Contents
Operating Instructions for Smart
Sport Watch Product
LS460 Smart Sports Watch
A: Firstof al, please be sure to connect our smart watch through the “GloryFit APP.
-
Turn on the “Bluetooth” function of your phone.
-
Open the Google Play” or the” APP Store”.
-
Search for “GloryFit”APP and download it.
-
Open the APP, click “please connectdevice” click”Select device,find” MT65″”and bind it.
B: Perform the following steps to enable the answer/call function.
-
After selecting”MT65″ to connecton the mobile phone system pop-up
-
Turn on the call Bluetooth and Media audio switch on the watch (used when the watch cannot make calls and play media sound).
-
In the phone settings, in the system bluetooth turn on these permissions of the “MT65″
-
Once connected you could use the watch to answer/make calls FTAA
If you don’t need to use the call function, you can turn off the answer/ call function so that the battery can last longer.
Appearance Description
Schematic Diagram of Charging
Operate in strict accordance with the following figures:
- Please use the product-specific magnetic charging cable to charge by aligning it with the charging contacts on the back of the watch.
- Do not use a power adapter with a voltage exceeding 5V and anoutput current exceeding 1A for charging, as this may cause charging failure and damage to the magnetic charging cable or the device.
- Please activate the watch when it runs out of power before charging: the watch screen will only light up after about 5 minutes of normal charging.
Introduction to Watch Function
- Call Bluetooth switch
- Cellular menu
- Day and night mode switch
- Do Not Disturb On/Off
- Brightness adjustment
- Up hand to light screen
- Find phone
- Flashlight switch
- Setting
Main interface: Display the current time, date, steps and other
information of the watch; press the main interface for a long time to switch
the main dial left and right, and click to confirm.
Call function: Click the call switch. Open the phone settings-Bluetooth –
search connection Bluetooth MT65 to play mobile music or make / receive calls,
etc.
Steps: Display current steps, distance and calories of the watch.
Heart rate: Slide to this page and keep a while and automatically measure
the current real-time dynamic heart rate. Connectable to APP to set real-time
monitoring and view data records.
Blood oxygen: Slide to this page and keep a while and automatically
measure the current blood oxygen data and vibrate to indicate the result.
Exercise: Click on the icon on this page to access the multiple sport
modes option. Select a sport mode, click the icon to start, and slideright to
pause or stop the sport.
Sleep: The bracelet can record and display your sleeping time last night,
and the time of deep sleep and light sleep. More detailed data can be viewed
synchronously in the APP.
Weather: Display the local weather conditions. Connect the
synchronization APP for normal use, and open the phone GPS to ensure that the
APP gets the positioning permission function and network connection.
Message:The watch can receive cell phone calls, SMS, QQ, WeChat and other
notification alerts, which can be set according to the message alert and turn
on the corresponding push switch on the APP This page can store up to 8
message records. This function needs to stay connected with the phone and make
sure the APP gets the corresponding permission.
Music: After connecting the APP the watch can control the mobile phone
player to play/pause/switch to the previous song and the next song. This
function must be opened on the mobile phone player before it can be controlled
on the watch. This function requires staying connected to your phone and
turning on the notification push permission.
Stopwatch : Click on the icon to start the function, and click Start for
timing, pause or reset. Slide right to leave.
Search: Click this icon, your phone will beep to indicate the orientation
of your phone, this function requires your phone to stay connected with the
watch APP No alert on the phone insilent mode.
Setting: Click on the icon to start the function, switch left and right
to set the brightness adjustment, factory data reset, turn off the watch and
view the watch information.
Watch App Installation and Connection Instructions
As a Bluetooth product, most of the functions of this product need to be
connected to a special APP for normal use, such as time display, call alert,
and message alert. For Android phones, please do not use Bluetooth to connect
and pair with the watch directly.
Please scan the following QR code to select the version suitable for your
mobile phone system or enter main application markets to download and install
Glory Fit.
Device Connection
Before using the APP, please turn on the mobile phone Bluetooth and mobile
phone GPS positioning to obtain the mobile phone positioning permission. After
the connection is successful, it will prompt” To pair with: SANSUI “please
select pairing.
The watch connection operates as follows:
Note:
- For Android users, the APP should obtainpermissions and run backstage, otherwise it will affect the user experience.
- For systems below iPhone ios 13, after connecting in the APP you need to connect to the MT65 for the second time in the Bluetooth settings of the mobile phone, and then you can make calls, play multimedia music and
Precautions
- No charging with water stains.
- This product is an electronic monitoring product, not for medical use,and the measurement data is for reference only.
- It is not recommended to wear in hot water baths and longtime swimming.
- Please charge with the matching charging cable.
FAQ
1. Problems such as the watch cannot be searched in the APP, or the watch cannot synchronize with the time of the phone.
Answer: A. Make sure your phone's Bluetooth and phone GPS positioning are on before using it for the first time. B. Users need to open the APP to obtain positioning permission(- Phone Settings - Applications). C. If the watch has already been paired with a Bluetooth connection in the phone, please cancel the pairing first and then search for the connectionin the APP D. If the watch is not used for a long time, the Bluetooth will go into a dormant state. Please turn off the Bluetooth of the watch and the phone,reopen it after about 1 minute, and try to search the connection in the App again. E. The watch must be connected to the APP, otherwise, the steps, sleep,time, and other function will not work properly.
2. There is no alert function on the watch.
3. The reminder switch is turned on, but there is no reminder on the watch, or the reminder is sporadic.
Answer: If the phone turns on the message notification and the corresponding notification permission according to the above tips, the Bluetooth is kept on, and the APP and the watch are kept connected, maybe the system authorized APP alert function is not working, and the user needs to re-check the message push function.
4. Android's phone Bluetooth often disconnects or has no message alert after a period of connection.
Answer: Android will from time to time clean up the phone's backstage applications or applications that consume more power for smooth system operation. If the APP is not set to allow backstage running, it will be easily cleaned by the svstem and the Bluetooth will drop out. Different Android phones have different methods for APp backstage running settings. As in the Huawei nova 8 SE: Settings - Battery - Power Consumption Ranking APP - Application Launch Management - Manually manage to turn on backstage running.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>