phrozen V2 Cure UV Post-Curing Lamp User Manual
- June 3, 2024
- phrozen
Table of Contents
phrozen V2 Cure UV Post-Curing Lamp
Power Supply & Light Switch
Turn on
the device
Connect the power cable. Press the Power button to turn on the device.
Turn off the device
Long press the Power button. The curing lamp will turn off after a beep sound.
To Set Curing Time
Click the button S for preset modes
This comes with three curing time settings: 5 min, 10 min, 20 min.
Click the button for custom modes
Click on the up and down keys to increase or decrease 1 minute each time.
Long press the keys to quickly increase or decrease the minutes.
How to Operate the UV Curing Lamp
Close the UV lamp cover. Click on the Power button. The curing lamp will begin operation.
Warning
- The UV lamp needs to be closed completely for the device to begin operation.
- Do not stare at the UV curing lights without closing the UV lamp as this may cause damage to your eyes.
- This appliance can be used by children aged 8 and above as well as by persons with reduced physical, sensory, or mental capabilities, if supervised or given instruction regarding the use of the appliance in a safe way, to ensure that the hazards involved are understood. Children are NOT allowed to play with the appliance.
- Children are NOT allowed to clean or provide device maintenance without adult supervision.
Standard Maintenance Procedure
Please use sanitizing alcohol to clean the outside of your device. Do not
use any oily or corrosive liquids to clean the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>