CALEX Holland Smart Movement Motion Sensor Instructions
- June 3, 2024
- CALEX
Table of Contents
CALEX Holland Smart Movement Motion Sensor Instructions
Bluetooth Pairing
Enable Bluetooth on your mobile phone for pairing (if applicable).
Set up in 4 easy steps
Before starting the installation, you will need to note the name of your WiFi network and its password, remember to respect spaces and capital letters.
Note: this item only works on a 2.4GHz Wifi network, not on a 5GHz WiFi network. Please consult the manual of your router for settings
- Open the app. First time user? Follow on-screen instructions to create your account. To add this device start by touching ‘add device’ (+) and follow the on-screen instructions.
- Turn the lamp on. The lamp will start flashing. (If the lamp or device does not start flashing, switch it on and off 3 times. This will reset the lamp or device.)
- Follow the on screen prompts to finish installation.
If you get the notification the product only works on 2.4GHz networks you should change the WiFi-frequency of your network to 2.4GHz only in the setting menu of the router
Declaration of Conformity
We, Electro Cirkel Retail BV, as importer declare that this “radio equipment”
is produced in China.
The products passed all tests according to all relevant CE standards and
regulations. The complete list of harmonized standards regarding directive
2014/53/EU can be found at:
https://ec.europa.eu/growth/single-market/european-standards/harmonised-
standards/red_en
The complete Declaration of Conformity can be found at
www.calex.eu. For other compliance-related information
please contact:
Website: www.calex.eu
email: info@calex.eu
Phone: +31 (0)10-2981980
Postal: Lyonstraat 29, 3047 AJ, Rotterdam, the Netherlands
Conformity with all relevant EU Directive requirements
Safety: if applicable: only use this device for intended purpose; do not use this device if damaged or defective. If this product is damaged, especially if the cable or fitting is damaged, this product must be shut down immediately. In this case, replacement is required; before replacing, turn off power and let device cool to avoid electrical shock or burn. The adapter (if applicable) must be installed near the device, not connected to any other adapter, and easily accessible. Products may only be used in combination with the original adapter. This product should only be opened by an authorized technician when maintenance is required. Never carry out repairs yourself. To disconnect voltage: pull the plug.
Removal of your product. This product is made of high quality materials and parts that can be recycled. If you see this symbol on your product, it means that the product is covered by EU Directive 2002/96 / EC. Ask your own local government about the way in which electrical and electronic products are collected separately in your region. When disposing of old products, observe local legislation and do not dispose of these products in the normal household waste. Properly disposing of old products will prevent adverse effects on the environment and public health.
Warranty: Any changes and/or modifications to the product will void the warranty. We cannot accept any liability for damage caused by incorrect use of the product. Disclaimer: Designs and specifications might be subjected to change without notice. All logos, brands and used product references are trademarks or registered trademarks of their respective holders and hereby recognized as such
Intended use: indoor
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>