KINGSUN 299740320 2.4G Wireless Mouse Receiver Instruction Manual
- June 12, 2024
- KINGSUN
Table of Contents
299740320 2.4G Wireless Mouse Receiver
Instruction Manual
Package info
1 ,wireless mouse …………………………………………….1PCS
2. Micro Receiver …………………………………………1 PCS
3 , instruction manual and warranty card…………….. 1PCS
System
-
Operating system
windows XP /X64/ vista / vista 64/ WIN 7/ WIN 7 64/ WIN 8/ WIN 10/ Mac -
Interface free usb (2 . 0/3 . 0)
Product
- using 2.4G wireless frequency hopping technology, super antiinterference ability
- When the receiver is powered off, the mouse power will be automatically turned off
- Built-in memory, no need for code, intelligent connection
- Nano receiver plug and play, easy to carry
Technical info
- working frequency………….. 2 .402 – 2 .480 GHz
- Number of working channels……………. 16 ( automatic frequency )
- Wireless launch angle : …………………3 60
- Effective working distance………………. 8 – 10 m
- receiver operating voltage……………… 5V
- receiver operating current…………………..30 mA
- Receiver size……………………………. 18.5146 MM±0 . 5mm
Operation
-
Product use and installation steps
1 , Take out the receiver from the mouse and plug it into the computer USB -
The system will automatically install the driver ( Figure 1 )
-
if appear ( figure 2 ) A hint that indicates the mouse receiver successfully installed
-
Take out the mouse and open the battery cover according to the mark on the bottom of the mouse
-
According to the positive and negative polarity marks of the mouse battery compartment, insert a AA battery (Please pay attention to the polarity of the battery , reverse installation may damage the mouse)
-
at this time the bottom light of the mouse is on , indicating that the mouse can be used normally ( Otherwise check whether the polarity of the battery is installed correctly and reinstall )
-
Close the battery cover, you can use your wireless mouse
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>