hotmoon HMNL-07 Cocoon Pro Smart Sound Machine User Guide

Smart Sound Machine User Guide
Cocoon Pro
Model: HMNL-07
Relax More, Sleep Better

HMNL-07 Cocoon Pro Smart Sound Machine

Thank you for choosing Hotmoon. Hotmoon provides personalized sleep solutions through sound-light combination machines and our companion app, featuring a curated content library. We offer over 200 classic noises and nature sounds to ease you into a deep slumber. Additionally, if you’re experiencing sleep difficulties due to stress, a busy work schedule, or parenting responsibilities, our collection of over 300 brainwaves and melodies, meticulously engineered for relaxation, along with more than 50 professional light options, can help calm your mind. Hotmoon is dedicated to providing you with the exclusive key to a good night’s sleep.
Safety Warning

• Please always keep the device at least one meter away from children as the cord can pose a strangulation hazard.
• This product is not waterproof. Do not use it near or place in water.
• Do not place this device aloft. When placing it on the table, please avoid the edges to prevent it from falling down, which might damage the device and also get potential hurt.

Basic Information of Device

1. Specification

Buttons

1. Routine
   • Tap when you’re ready to rest. (It will seamlessly transition through each step of your Routine as programmed in the app. )
   •  Once your Routine is playing, tap this button to skip to the next step.
   •  Sound, light, and duration can be customized in the app, and up to 8

2. Noise Sounds :
   Tap to switch between up to 9 sounds customized in the app.

3. Nature Sounds
   Tap to switch between up to 9 sounds customized in the app.

4. Music
   Tap to switch between up to 9 sounds customized in the app.

5. Power
   Tap: turn on, or switch to standby mode if already active.

6. Timer
   Tap : 45m/90m/8h/Timer off

7. Volume –
   Tap: Volume down
   Tap over 2s: Volume down continuously

8. Volume +
   Tap: Volume up
   Tap over 2s: Volume up continuously

9. Light
   Tap: Cycle through 8 options – 20% warm white, 100% warm white, red, orange, green, blue, purple, and off.
   Hold 2s: Turn off the light

10. Clock
    After pairing it with your phone, the clock will automatically set its time. You can adjust the brightness and clock display period in the app.

11. Mode Switch
    Press to switch between the Sound Machine Mode and Bluetooth Speaker Mode. The default is Sound Machine Mode. Long press 3s to enter the pairing status.

NOTE:

• Sound Machine Mode: The device defaults to this mode. You can customize the Routine and three sound buttons in the app. Additionally, the device can be controlled through the app.
• Bluetooth Speaker Mode: The device can also function as a Bluetooth speaker, In this mode, you can play all audio from the ‘Cloud’ column through the device.

Dimension

Components

Part 2 – Sound Machine Mode

1. Download the Hotmoon app
   To download Hotmoon App, please scan the QR code or search for “Hotmoon’in
   Apple App Store (iOS) or Google Play Store (Android).

https://hotmoon.com/pages/install-hotmoon-app

NOTE:

• Due to the requirements of the Android system, it is necessary for the OS below 12 to obtain the geographic location permission when connecting via Bluetooth. It won’t be used to record personal private information.
• The Hotmoon App is continually being improved and may change over time. If there is any difference, follow the in-app instructions.

2. Create/login your own hotmoon account
Open the Hotmoon app, if you already have an account, tap “Log in”. If not, tap “Create an Account”.

3. Connect your Cocoon Pro
Step 1: Connect the device to a power adapter with an output voltage of 5V1A with the USB-C cable.
Step 2: Tap the power button to turn on the device. If it’s the first time to use it, the white light will flash. If not, you need to press and hold the device’s bottom button until the white light flashes.

Step 3: You can follow the steps in the app to connect your Cocoon Pro. Bluetooth needs to be turned on.
Note: In the sound machine mode, the content of the “Cloud” section can only be played on your phone.

**Part 3 – Bluetooth Speaker Mode

**

Step 1: Press the mode switch button at the bottom of the device and you’ll hear the prompt “Bluetooth Speaker Mode”. Cocoon Pro will work as a Bluetooth speaker.
Step 2: Go to the Bluetooth page in the “Settings” of your phone, Connect the “Cocoon Pro Speaker”,

Note:

1. In Bluetooth speaker mode, the content of the “Cloud” section can be played on the device.
2. If you want to switch from Bluetooth Speaker Mode to Sound Machine Mode, you need to press the mode switch button, and “Sound Machine Mode” appears under the device name in the app.

Part 4 – FAQ

1. How to customize the sound buttons?
You can customize these three sound buttons through the app. The buttons’ icon is the same in the app as shown below. You can choose any single sound or an album to replace. Check the “User Guide” on the “Device” column in the app.

NOTE:

1. The sections cannot be deleted but can be sorted, edited, enabled, and disabled. You can customize each section’s sound through the “Library”.
2. At least 1 and up to 9 sections could be enabled.
3. Tap or hold any sound button, Cocoon Pro plays the next sound you enable.

2. How to customize my Routine?

Step 1: Tap “Edit”
Step 2: Tap the exact section to enter the editing page, hold the “ ” icon on the left to adjust the sequence, and disable any section by the “ ” on the right.
Step 3: Tap “Save”.

NOTE:

1. The sections cannot be deleted but can be sorted, edited, enabled, and disabled.
2. When the duration is “00:00″, this section will play without stopping. Cocoon Pro will not play the next section until you tap the ” ” button.
3. At least 1 and up to 9 sections could be enabled.
4. Tap or hold the ” ” button, Cocoon Pro plays the next section you enable.
5. Once all sections are played, Cocoon Pro enters the standby status. Tap the ” ” button to restart.

3. How to adjust the clock brightness?
Step 1: Tap “Settings” icon.
Step 2: On the “Device Settings” page, tap “Clock Brightness” to set the clock brightness and specified display period.
Step 3: Tap “Back” icon to the homepage.

4. How to stop my Schedule?
Tap any button to stop your Schedule playback.
5. How to pair again after disconnection?
Press and hold the button at the device’s bottom. Then the device will flash with the white light, showing it’s going to be paired. Start from “Add Device” and complete the steps in the app to connect. Wi-Fi is required.
6. How long do the buttons’ backlights last?
The backlight of all buttons automatically turns off after 10 seconds of no operation and can wake up by tapping any button.
7, What do sound machine mode and Bluetooth speaker mode mean?
Sound machine mode: You can control and customize Cocoon Pro, but all content of the “Cloud” section can be played only by your phone.
Bluetooth speaker mode: Cocoon Pro works as a Bluetooth speaker, and all content of the “Cloud” section can be played by Cocoon Pro.
8. Why do I need to offer geographic location permission?
Due to the requirements of the Android system, the OS below 12 must obtain geographic location permission when connecting via Bluetooth.
9. I cannot unlock the VIP content of the Hotmoon app.
Only the account that is being paired with Cocoon Pro can unlock the VIP content. If account A gives Cocoon Pro to account B after pairing, then account B can unlock the VIP content after pairing, while account A could just enjoy other features except unlocking the VIP content.
10. How to turn off the sound or light separately?
Turn off the sound: hold the ” ” until the sound if off.
Turn off the light: hold the ” ” until the light if off.

FCC Warnning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference thatmay cause  undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particularin- stallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.

Need help?
Hotmoon support is here.
Contact us at support@hotmoon.com
Manufaturer: Shenzhen ZhiLong Electronic Technology Co., Ltd
(ShenZhenShi ZhiLong DianZi KeJi YouXian GongSi)
Address: No.105, Fourth Lane, Yongxiang Rd., Wuhe Community, Bantian
St.Longgang Dist., Shenzhen, CHINA 518000

**** Go paper-free, make life easier, and do something good for the environment. MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>