Calex 5301001300 Floor Lamp Instruction Manual

Calex 5301001300 Floor Lamp

Specifications

• Number of items: 12
• Components included: 4x Base plate, 4x Swing joints (A), 1x Controller, 1x Adapter

Product Usage Instructions

Assembling Your Floor Lamp

1. Fix the base plate to the floor lamp using hex key 1.
2. Do not completely screw out the screws of swing joints (A). Donot adjust the angle without loosening the screws.
3. To adjust the angle, loosen the screw using hex key 2 (2-3 turns), set the angle, and tighten the screw.
4. Connect the cable to the controller and the controller to the adapter.

Wall Mount

1. Choose suitable plugs for the intended surface.
2. Do not completely unscrew the screws of swing joints (A).
3. Do not adjust the angle without loosening the screws.

ASSEMBLING YOUR FLOOR LAMP

1. Fix the base plate to the floor lamp using hex key 1

Swing joints (A)

Important

• Do not completely screw out the screws.
• Do not adjust the angle of the swing joints without loosening the screws
• To adjust the angle, loosen the screw using hex key 2 (2-3 turns). Set the angle, and tighten the screw.
• Connect the cable to the controller and the controller to the adapter. Proceed with C1 to add the floor lamp to the Calex Smart App.

WALL MOUNT
Swing joints (A)

Important:

• Check which plugs are best suited for the intended surface.
• Do not completely screw out the screws.
• Do not adjust the angle of the swing joints without

loosening the screws
To adjust the angle, loosen the screw using hex key 2 (2-3 turns). Set the angle, and tighten the screw.
Ensure the power cables can reach a wall socket.

Clips
The size of the clips matches the size of joint B.

• Mark the center of each joint (B) on the surface. Do this for 4 joints.

• Mark the center of each line to determine where you need to drill the holes.
  Drill the holes using a 5mm drill. Insert the plugs and screw the clips in place.

• Gently press the lamp in place.
  Connect the cable to the controller and the controller to the adapter. Proceed with C1 to add the floor lamp to the Calex Smart App

INSTALLATION

FAQ

• Q: How do I add the floor lamp to the Calex Smart App?
  • A: Proceed with step C1 mentioned in the manual to add the floor lamp to the Calex Smart App.
• Q: What should I do if I encounter issues with adjusting the swing joints?
  • A: Ensure that you have followed the instructions to only loosen the screws enough to adjust the angle. If you face difficulties, reach out to customer support for assistance.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>